sensor NISSAN 350Z 2007 Z33 Quick Reference Guide

tr aCti On CO ntr Ol s Y ste M (tC s) OFF sW itCh
(if so equipped)
The vehicle should be driven with the Traction Control System (TCS)
on for most driving conditions. TCS reduces the engine output to
reduce wheel spin. The engine speed will be reduced even if the
accelerator is depressed to the floor. If maximum engine power is
needed to free a stuck vehicle, such as from mud or snow, turn the
TCS off.
 To turn off the TCS, push the TCS OFF switch. The indicator light will illuminate.
 Push the switch again or restart the engine and the system will operate normally.
F r O nt -Passenger air Bag status light
This vehicle is equipped with the Nissan Advanced Air
Bag system. Under some conditions, depending on
the type of occupant or object detected in the front
passenger seat by the occupant classification sensor, the
front-passenger air bag is designed to automatically turn
OFF. When the front-passenger air bag is OFF, the front-
passenger air bag status light will illuminate*. For example:
 When the system detects that the front-passenger’s
seat is occupied by a small adult, child or child restraint as outlined in the Owner’s
Manual, the will illuminate to indicate that the front-passenger air bag is OFF and
will not inflate in a crash.
 When the front-passenger’s seat is occupied and the passenger meets the conditions
outlined in the Owner’s Manual, the will not illuminate to indicate that the front-
passenger air bag is operational.
*When the system detects that the front-passenger’s seat is unoccupied, the
passenger air bag status light will not illuminate even though the front-passenger
air bag is OFF.
Refer to the Owner’s Manual for detailed information regarding the Nissan Advanced Air
Bag System.
seatBaCK tilt Can Cel s W itCh (r oadster only)
The passenger seat of the 350Z Roadster automatically tilts
forward when operating the soft top. This function can be
cancelled by pushing the seatback tilt cancel switch to the
CANCEL position. Push the seatback tilt cancel switch to the
AUTO position to reactivate the power seatback tilt switch.
If the seatback tilt cancel switch is in the CANCEL position,
the seatback tilt paddle switch (located on the back of the
passenger seat) will not work. In this situation, tilt the passenger
seatback forward using the power seat position switch.