turn signal NISSAN 370Z ROADSTER 2013 Z34 08IT Navigation Manual

Black plate (167,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
Settings keyboard layout of character
input screen
GUID-13AB4AEC-55B3-4A22-AB4F-9940A64DBE58Depending on the user’s preference for the
keyboard layout of character input screen, the
ABC layout or QWERTY layout can be selected.
Example: Switching to the QWERTY layout
NSE00211. Highlight [Others] and push.
2. Highlight [Keyboard Type] and push
.
NSE00223. Highlight [QWERTY] and push .
The indicator illuminates when the item is set.
4. Push

Black plate (203,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
route using secondary roads that will return to
primary roads after a specified number of miles.
For more information on the Detour function,
refer to section 5.
BirdviewTMGUID-8DDC5912-6B67-4631-8C1A-776DF46FB8D3
NGE0001Two map types, the 2D (Plan View) map and
BirdviewTM(3D) map, are available in the
NISSAN Navigation System. BirdviewTMmap
displays the map from an elevated perspective.
In Birdview
TMmap, it is easy to recognize an
image of the route because it provides a
panoramic view over a long distance.
For more information on Birdview
TMmap, refer
to section 3.
VOICE GUIDANCEGUID-C384905E-8F9A-443E-A711-9628C5C49538
NGE0002Route guidance is provided through voice and
visual instructions. Voice guidance announces
the appropriate directions when approaching an
intersection to turn.
For more information on voice guidance, refer to
section 5.
GUID-03C84863-4642-40E6-927E-938E75D29A0E
DISPLAY OF CURRENT VEHICLE LO-
CATION
GUID-745FB371-9E5B-49BC-928B-E7B6175048F7This navigation system combines the data
obtained from the vehicle (by gyro sensor) and
from GPS (Global Positioning System) satellites
to calculate the current location of the vehicle.
This position is then displayed throughout route
guidance to a destination.
WHAT IS GPS (Global Positioning
System)?
GUID-670C5732-A354-433C-9C45-F76ACA3F2460GPS is a position detecting system that uses
satellites deployed by the U.S. government. This
navigation system receives radio signals from
three or more different satellites that orbit
13,049 miles (21,000 km) above the earth in
space, and detects the position of the vehicle by
utilizing the principle of triangulation.
Positioning adjustmentGUID-BD04A473-9C61-4AA8-BDD7-7197A4078961When the system judges that the vehicle
position information is not accurate based on
vehicle speed and gyro sensor data calculations,
the system will automatically adjust the position
of the vehicle icon using GPS signals.
General system information10-3
CURRENT VEHICLE LOCATION

Black plate (224,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
11-4Troubleshooting guide
GUID-B7C8CF99-4AE0-48B5-88F3-A2B0020D2A49
SymptomPossible cause Possible solution
Names of roads and locations differ
between Plan View and Birdview
TM. This is because the quantity of the displayed information is reduced so
that the screen does not become too crowded. There is also a chance
that names of the roads or locations may be displayed multiple times,
and the names appearing on the screen may be different because of a
processing procedure. This is not a malfunction.
The vehicle icon is not displayed in
the correct position. The vehicle was transported after the ignition switch was pushed off,
for example, by a ferry or car transporter. Drive the vehicle for a while on a road where
GPS signals can be received.
The position and direction of the vehicle icon may be incorrect
depending on the driving environments and the levels of positioning
accuracy of the navigation system. This is not a malfunction. Drive the vehicle for a
while to automatically correct the position and
direction of the vehicle icon.
“Current vehicle location” (page 10-3)
When the vehicle is traveling on a
new road, the vehicle icon is located
on another road nearby. Because the new road is not stored in the map data, the system
automatically places the vehicle icon on the nearest road available.
Updated road information will be included in the
next version of the map data.
The screen does not switch to the
night screen even after turning on the
headlights. The daytime screen was set the last time the headlights were turned
on.
Set the screen to the night screen mode using

when turning on the head-
lights.
“Display settings” (page 8-3)
The map does not scroll even when
the vehicle is moving. The current location map screen is not displayed.
Push