check engine NISSAN 370Z ROADSTER 2014 Z34 Quick Reference Guide

4
ENGINE OIL TEMPERATURE GAUGE
Performance driving patterns or extended driving at
elevated ambient temperatures may result in increased
engine oil temperature during operation.

During normal vehicle operation oil temperatures will
be below 280°F (138°c). If the engine oil temperature
gauge
01 indicates 280°F (138°c) or above while

driving, reduce engine speed (RPM) and drive at a
reduced speed.

When the engine oil temperature is high, the engine protection mode, whic\
h helps reduce
chance of engine damage, may activate and automatically decrease engine p\
ower.
For more information, refer to the “Instrument and controls (section 2)”, “Maintenance and do-it-yourself (section 8)”
and the “Technical and consumer information (section 9)” of your Owner’s Manual.
01
AUTOMATIC POWER WINDOWS
Your power windows have an automatic adjusting
function to ensure windows close completely to
help seal against wind noise and weather leaks.

When the front doors are opened, the windows
automatically lower slightly to avoid contact between
the windows and the side roof panels.

If your vehicle’s battery has been discharged or
disconnected, your power window automatic
function will not operate.

Refer to your Owner’s Manual for information to initialize your power window system.

If the power window functions do not operate properly after initializing\
the system, have your
vehicle checked by a NISSAN dealer.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
esse ntial i n for mation
To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi

5
NISSAN INTELLIGENT kEY® SYSTE M
The NISSAN Intelligent key® system allows you to lock
or unlock your vehicle, open your rear hatch/trunk lid and
start the engine. It is important to make sure the Intelligent
k ey is with you (that is, in your pocket or purse).

The operating range of the Intelligent k ey is within
31.5 in (80 cm) from each request switch.

To lock the vehicle, push either door handle
request switch
01 once or press the
button
02
on the key fob.

To unlock the vehicle, perform one of the following procedures:
• Push either door handle request switch

01 once; the corresponding

door will unlock. Push the door handle request switch 01 again

within 1 minute; all other doors will unlock, or
• Press the

button
03 on the key fob to unlock the driver’s side door.
• Press the

button again; all other doors will unlock.

The Intelligent k ey can also be used to activate the panic alarm by
pressing and holding the
button
04 for more than 1 second. Once

activated, the panic alarm and headlights will stay on for a period of time.
INTELLIGENT k EY BATTERY DIS cHARGE

If the low battery indicator
05 appears in the vehicle

information display, replace the battery as soon
as possible.

If the battery in the Intelligent k ey is almost
discharged, the guide light
06 of the Intelligent k
ey
port blinks and the key insertion indicator 07 will

appear in the vehicle information display.

To start the engine under these circumstances, insert
the Intelligent k ey into the key port with the key ring
end toward you until it latches into place. Then push
the ignition switch to start the engine.

To remove the Intelligent k ey from the port, push the
ignition switch to turn the engine off and then pull the
Intelligent k ey out of the port.

Do not insert the mechanical key or any other objects
into the Intelligent k ey port. Inserting any object other
than the Intelligent k ey will damage the Intelligent
k ey port.
For more information, refer to the “Pre-driving checks and adjustments
(section 3)”, the “Starting and driving (section 5)” and the
“Maintenance and do-it yourself (section 8)” of your Owner’s Manual.
01
06
F
05
07
02
03
04
first drive features
To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi

6
REAR HATCH/TRUNk LID RELEASE
It is important to make sure the NISSAN Intelligent
key® is with you (that is, in your pocket or purse).

Unlock the rear hatch/trunk lid by pushing the
request switch
01 .

Once unlocked, push the opener switch
02 and

pull up to open the rear hatch/trunk lid.
For more information, refer to the “Pre-driving checks and adjustments (section 3)”
of your Owner’s Manual.0102
SOFT TOP OPERATION ( Roadster models)
Before opening or closing your soft top, refer to the
Owner’s Manual for detailed warnings and cautions
regarding soft top operation.
Soft Top Operation
1. Make sure the area is clear of obstructions and
that there is at least 6 ft (2 m) of clearance above
the vehicle.
2. Apply the parking brake and move the shift lever to
the P (P ARk) position (automatic transmission) or
the N (N EUTRAL ) position (manual transmission).
3. Depress the brake pedal and the clutch pedal
(manual transmission).
4. Start the engine.
5. Push and hold the soft top operating switch,
located on the center console, to OPEN

01 or

CLOSE
02 until the top is fully opened or closed.

For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
01
02
To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
first drive features