with oil filter NISSAN ALMERA N15 1995 Owner's Manual
[x] Cancel search | Manufacturer: NISSAN, Model Year: 1995, Model line: ALMERA N15, Model: NISSAN ALMERA N15 1995Pages: 1701, PDF Size: 82.27 MB
Page 1528 of 1701

ENGINEMAINTENANCE
Changing EngineOil(Cont'd)
3. Tighten oildrain plug.
4. Fillwith engine oil.
Oil refill capacity:
Without oilfilter
4.6 C(4 Imp qt)
With oilfilter
5.1 C
(4-1/2
Impqt)
• Use recommended engineoil"API CD"with suitable vis-
cosity.
5. Confirm oillevel andwarm upengine.
6. Recheck oillevel andadjust itto "H" level ifnecessary.
Refill oiltothis
"H" level.
Do not overfill.
SMA822C
Changing EngineOilFilter
1. Remove oilfilter withTool.
WARNING:
Be careful nottoburn yourself, asengine andengine oilare
hot.
SMA412C
SMA167B
2.Before installing newoilfilter, wipeclean oilfilter mounting
surface oncylinder block,andapply alittle engine oilto
rubber sealofoil filter.
SMA010 MA-42
Page 1529 of 1701
![NISSAN ALMERA N15 1995 Owners Manual
2/3
ofaturn
ENGINE
MAINTENANCE @Q]
Changing EngineOilFilter (Cont'd)
3. Screw oilfilter onuntil aslight resistance isfelt, then tighten
an additional 2/3turn.
4. Warm upengine andcheck oillevel NISSAN ALMERA N15 1995 Owners Manual
2/3
ofaturn
ENGINE
MAINTENANCE @Q]
Changing EngineOilFilter (Cont'd)
3. Screw oilfilter onuntil aslight resistance isfelt, then tighten
an additional 2/3turn.
4. Warm upengine andcheck oillevel](/img/5/57349/w960_57349-1528.png)
2/3
ofaturn
ENGINE
MAINTENANCE @Q]
Changing EngineOilFilter (Cont'd)
3. Screw oilfilter onuntil aslight resistance isfelt, then tighten
an additional 2/3turn.
4. Warm upengine andcheck oillevel.
5. Adjust oillevel ifnecessary. •
Refer toStep 4in "Changing EngineOil",MA-42.
i
• Clean excess oilfrom engine.
SMA229B Checking InjectionNozzle
1. Remove injection deliverytubesandfuel spill tube.
2. Remove nozzlewithasuitable tool[span 27mm (1.06 in)].
WARNING:
When usingnozzle tester,becareful nottoallow diesel fuel
sprayed fromnozzle tocome intocontact withyour hand or
body, andmake surethatyour eyes areproperly protected.
3. Clean andcheck nozzles.
4. Install nozzle toinjection nozzletesterandbleed airfrom
flare nut.
5. Check initialinjection pressure bypumping testerhandle
one time persecond.
EF791A
6.Install injector topressure tester.
7. Check initialinjection pressure bypumping testerhandle
slowly (onetime persecond).
Injection pressure:
12,749 kPa(127.5 bar,130kg/cm
2,
1,849psi)
• Always checkinitialinjection pressure beforeinstalling new
nozzle.
Good
\
I
,
,
I
Wrong SEF672A
8.Check fuelspray pattern bypumping testerhandle quickly
(4 or 6times persecond).
9. Ifinitial injection pressure orinjection nozzleisnot normal,
adjust orclean injection nozzleorreplace it.
Refer toEC section forinjection pressure adjustment.
10. Install allinjection nozzlesandsecurely connectfuelspill
tube anddelivery tubes.
11. Bleed airfrom fuelsystem andcheck forfuel leakage with
engine running.
EF794A
MA.43
Page 1539 of 1701

SERVICEDATAANDSPECIFICATIONS (SOS)
Engine Maintenance
Engine oilcapacity (Refillcapacity)
Unit:
r
(Imp qt)
INSPECTION
ANDADJUSTMENT
Drive beltdeflection
GA14DE engineexceptforEurope
Unit:mm(in)
With
oilfilter change
Without oilfilter change
3.2
(2-7/8)
2.8
(2-1/2)
•
Used beltdeflection
Deflection Deflection
of
Limit afteradjust- new
belt
ment
Alternator With air
6-7 55-6.5
conditioner 10(0.39)
(0.24-0.28)
(0.217-0.256)
compressor
Without air
7-9 6-8
conditioner 11(0.43)
(0.28-0.35) (0.24-0.31)
compressor
Power steering
7.5(0.295) 4
-6
3-5
oil pump
(0.16-0.24) (0.12-0.20)
Applied pushing
98N(10 kg, 22Ib)
force
GA14DE engineforEurope
Unit:mm(in)
Used beltdeflection
Deflection Deflection
of
Limit afteradjust- new
belt
ment
Alternator
With power
11(0.43)
steering
7-9
6-8
Without (0.28-0.35) (0.24-0.31)
power steer- 10(0.39)
ing
Air conditioner
9.5(0.374) 6
-8 5
-7
compressor (0.24
-0.31) (0.20-0.28)
Power steering
75(0.295) 4
-6 3-5
oil pump (0.16
-0.24)
(0.12-0.20)
Applied pushing
98N(10 kg,22Ib)
force
Coolant
capacity (Refillcapacity)
With reservoir tank
Unit:((Imp qt)
With heater Without
heater
M/T
5.9(5-1/4) 5.6(4-7/8)
A/T 6.4(5-5/8) 6.1(5-3/8)
Spark plug
GA16DE
&
GA14DE
GA16DE
&
GA15DE
engine forEurope engineexceptfor
and Israel EuropeandIsrael
Type Standard BKR5EBKR5E-11
Cold BKR6E,
BKR7E BKR6E-11,
BKR7E-11
Plug gap mm
(in) 0.8
-0.9 1.0
-
1.1
(0.031 -0.035) (0.039-0.043)
MA-53
Page 1540 of 1701

SERVICEDATAANDSPECIFICATIONS (SOS)
INSPECTION ANDADJUSTMENT
Drive beltdeflection Engine
Maintenance
Engine oilcapacity (Refillcapacity)
Unit:
f
(Imp qt)
Unit:
f
(Imp qt)
Spark plug(Platinum-tipped type)
Coolant
capacity (Refillcapacity)
With reservoir tank
Withheater Withoutheater
MIT
6.1(5-3/8)
5.8(5-1/8)
AIT
6.6(5-718) 6.3(5-1/2)
Reservoir tank
07(5/8)
3.4
(3)
3.2 (2-7/8)
With
oilfilter change
Without oilfilter change
Unit:
mm(in)
Used beltdeflection
Deflection Deflection
of
Limit afteradjust- new
belt
ment
Alternator With aircon-
11.5-12.5 7-8 6.5-7.5
ditioner com-
(0.453-0.492) (0.28
-0.31) (0.256-0.295)
pressor
Without air
12-13 8-9 7-8
conditioner
(0.47-0.51) (0.31-0.35) (0.28-0.31)
compressor
Power steering 6-7 4-5 3.5-4.5
oil pump (0.24-0.28) (0.16-0.20) (0.138-0.177)
Applied pushing
98N(10 kg,22Ib)
force
Make
Type
Standard
Alternative NGK
PFR58-11
PFR68-11 PFR78-11
MA-54
Page 1541 of 1701

SERVICEDATAANDSPECIFICATIONS (50S)
Used beltdeflection
Deflection Deflection
of
Limit afteradjust- new
belt
ment
Alternator 14(055) 11
-13 9-11
(0.43 -0.51)
(0.35-0.43)
Air conditioner
14(0.55) 11
-13
9-11
compressor (0.43
-0.51)
(0.35-0.43)
Power steer-
8(0.31) 5
-7
4-6
ing oilpump (0.20-0.28)
(0.16-0.24)
Water pump
without power
-
8
(0.31) 6(0.24)
steering
Applied push-
98N(10 kg, 22Ib)
ing force
Coolant capacity (Refillcapacity)
INSPECTION
ANDADJUSTMENT
Drive beltdeflection
Unit:kPa(bar, kg/cm', psi)
12,749 (127.5, 130,1,849)
Without
oilfilter
With oilfilter
Injection pressure
Injection
nozzle
Idle speed
Unit:rpm
Standard
M/T
700
'go
800'
': Air conditioner "ON"
TIGHTENING TORQUE
Unit N'mkg-m
ft-Ib in-Ib
Manifold nuts
&
18-22
1.8-2.2
bolts 13
-16
Rocker cover
2-4
0.2-0.4 1.4-2.9 17-35
screw
Alternator, power
steering mounting 62-75
6.3-76 46
-55
bolt
Alternator, power
steering adjuster 16
-21
1.6-2.1
12-15
lock bolt
Cylinder block
54-74
5.5-7.5 40
-54
drain plug
Engine oilpan
29-39 3.0-4.0 22-29
drain plug
Injector (Tohead)
59-69 6.0-7.0 43-51
Spill tube 39-49
4.0-5.0 29-36
Delivery tube 22-25 2.2-2.5
16-18
Engine
Maintenance
Engine oilcapacity (Refillcapacity)
Unit:[(Imp qt)•
46 (4)
51 (4--1/2)
Unit:
mm(in)
Unit:
f
(Imp qt)
5.2 (4-5/8)
49 (4-3/8)
0.7 (5/8)
Unit: kPa(bar, kg/cm', psi)
78 -98
(0.78 -0.98, 08-1.0, 11-14)
59 -98
(0.59 -0.98, 06-10, 9-14)
157 (1.57, 1.6,23)
Standard
Limit
With
heater
Without heater
Reservoir tank
Radiator caprelief pressure
Radiator testingpressure
Cooling
systemcheck
MA-55