seat memory NISSAN ALTIMA 2008 L32A / 4.G Owners Manual

The lumbar support feature provides lower back
support to the driver. Move the lever up
s1or
down to adjust the seat lumbar area.Entry to the rear seat from outside of
the vehicle on the front passenger side
(Coupe)
Pull the seat recliner levers1to the uppermost
position folding the seat back forward
s2, releas-
ing the seat track.
Slide the entire forward for access to the rear
seat.
To return the seat to a locked position:
Push the upper seat back rearward until the seat
back and track are locked.Operating tips:
cThe seat back and track will not lock until the
seat back is returned rearward.
cThe seat track will not lock until it reaches
the first position memory point.
cThe seat back will return to the first locking
notch when using the seat recliner lever.
WRS0787WRS0789
1-6Safety—Seats, seat belts and supplemental restraint system
ZREVIEW COPYÐ2008 Altima(alt)
Owners ManualÐUSA_English(nna)
03/12/07Ðdebbie
X

Entry to the rear seat from outside of
the vehicle on the passenger side
using the upper seatback release lever
(Coupe)
The use of the upper seatback release lever
convenience lever
s1, on the inboard side of the
passenger seat, allows for the driver to:
callow passenger entry to the rear seat from
outside of the vehicle.
caccess items located behind the front pas-
senger seat.Pull the upper seatback release lever
s1to the
uppermost position, folding the seat back for-
ward
s2, releasing the seat track.
Slide the entire seat forward for access to the
rear seat.
To return the seat to a locked position:
Push the upper seat back rearward until the seat
back and track are locked.
Operating tips:
cThe seat back and track will not lock until the
seat back is returned rearward.
cThe seat track will not lock until it reaches
the first position memory point.
cThe seat back will return to an upright seat-
ing position if the upper seatback release
lever is pulled to the uppermost position.
Exiting from the rear seat on the front
passenger side, using the lower seat
back release lever (coupe)
Press on the lower seat back release levers1
until it reaches the lowermost position. Fold the
seat back forward
s2, releasing the seat track.
Slide the entire seat forward for access from the
rear seat.
To return the seat to a locked position:
Push the upper seat back rearward until the seat
back and track are locked.
WRS0791WRS0790
Safety—Seats, seat belts and supplemental restraint system1-7
ZREVIEW COPYÐ2008 Altima(alt)
Owners ManualÐUSA_English(nna)
03/12/07Ðdebbie
X

Operating tips:
cThe seat back and track will not lock until the
seat back is returned rearward.
cThe seat track will not lock until it reaches
the first position memory point.
cThe seat back will return to an upright seat-
ing position if the lower seat back release
lever is pushed to the uppermost position.
Exiting from the rear seat on the front
passenger side, using the upper
seatback release lever (coupe)
Pull the upper seatback release levers1to the
uppermost position, folding the seat back for-
ward
s2, releasing the seat track.
Slide the entire seat forward to exit from the rear
seat.
To return the seat to a locked position:
Push the upper seat back rearward until the seat
back and track are locked.Operating tips:
cThe seat back and track will not lock until the
seat back is returned rearward.
cThe seat track will not lock until it reaches
the first position memory point.
cThe seat back will return to an upright seat-
ing position if the upper seatback release
lever is pulled to the uppermost position.
WRS0791
1-8Safety—Seats, seat belts and supplemental restraint system
ZREVIEW COPYÐ2008 Altima(alt)
Owners ManualÐUSA_English(nna)
03/12/07Ðdebbie
X

“Bluetooth off”sG
Use the Bluetooth Off command to turn off the
BluetoothTHands-Free Phone System.
When the BluetoothTHands-Free Phone Sys-
tem is off, you will not be able to make or receive
calls using NISSAN Voice Recognition. Also, you
will not have access to the Phone Book.
You can still use the Memo Pad and access
Setup.
SPEAKER ADAPTATION (SA) MODE
Speaker Adaptation allows up to two out-of-
dialect users to train the system to improve rec-
ognition accuracy. By repeating a number of
commands, the users can create a voice model of
their own voice that is stored in the system. The
system is capable of storing a different speaker
adaptation model for memory A and memory B.
If memory A is available, the system will use
memory A to store the model. If memory A is in
use and memory B is available, the system will
use memory B to store the model. If both of the
memory locations are in use, the system will ask
the user to select which memory location should
be overwritten.
Training procedure
The procedure for training a voice is as follows.1. Position the vehicle in a reasonably quiet
outdoor location.
2. Sit in the driver’s seat with the engine run-
ning, the parking brake on, and the transmis-
sion in P (Park) (AT and CVT models) or N
(Neutral) (MT models) .
3. Press and hold the
button for more
than 5 seconds.
4. The system announces: “Press the
PHONE/SEND (
) button for the
hands-free phone system to enter the
speaker adaptation mode or press the
PHONE/END (
) button to select a dif-
ferent language.”
5. Press the
button.
For information on selecting a different lan-
guage, see “Choosing a language” earlier in
this section.
6. Voice memory A or memory B is selected
automatically. If both memory locations are
already in use, the system will prompt you to
overwrite one. Follow the instructions pro-
vided by the system.
7. When preparation is complete and you are
ready to begin, the press the
button.
8. The SA mode will be explained. Follow the
instructions provided by the system.9. When training is finished, the system will tell
you an adequate number of phrases have
been recorded.
10. The system will ask you to say your name.
Follow the instructions to register your
name.
11. The system will announce that speaker ad-
aptation has been completed and the sys-
tem is ready.
The SA mode will stop if:
cThe
button is pressed for more than 5
seconds in SA mode.
cThe vehicle begins moving during SA mode.
cThe ignition switch is turned to the OFF or
LOCK position.
Training phrases
During the SA mode, the system instructs the
trainer to say the following phrases. (The system
will prompt you for each phrase.)
cphone book new entry
cdial three oh four two nine
cdelete call back number
csetup pair phone
cmemo pad play
Monitor, climate, audio, phone and voice recognition systems4-57
ZREVIEW COPYÐ2008 Altima(alt)
Owners ManualÐUSA_English(nna)
03/13/07Ðdebbie
X