lumbar support NISSAN ALTIMA 2008 L32A / 4.G Quick Reference Guide

With power seats (if so equipped):
The control lever 01 allows you to make the following adjustments.
 Move the control level 01 forward or back-ward to adjust the seat cushion forward or backward.
 Pull up or press down on the front of the control lever A to adjust the front portion of the driver’s seat cushion.
 Pull up or press down on the rear of the control lever b to raise or lower the rear portion of the driver’s seat cushion.
Re CLINING

 Push the switch 02 forward to move the seatback forward; pull it back to move the seatback backward.
L UMBAR S UPPoRt
(driver’s seat , if so equipped):
 Pull up or push down the adjusting lever 03 repeatedly to adjust the lumbar support.
FOLDING DOWN THE REAR SEATS
FR oM INSID e tH e V eHICL e
 Open the access cover and press the release button 01 to fold down the center/passenger’s side rear seat.
 Reach through the opening and pull on the strap 02 located behind the seat to fold down the driver’s side rear seat.
FR oM tH e tRUNK
 Pull the strap 03 located behind the seat to fold down the center/passenger’s side rear seat.
 Pull on the strap 04 located behind the seat to fold down the driver’s side rear seat.
FOLDING DOWN THE FRONT SEATS
FR oM INSID e tH e V eHICL e

From the driver’s seat :
 Pull the upper seatback release lever 01, located on the inboard side of the passenger front seat, to the uppermost position and slide the seat forward.
From the back seat :
 Step or push down on the lower seatback release lever 02 located on the backside lower portion of the passenger seat and push the seatback, sliding it forward.
FR oM oU tSID e tH e V eHICL e
From the driver’s side :
 Pull the upper seatback release lever 01 , located on the outboard side of the driver front seat.
From the passenger side :
 Pull the seatback release lever 02 fully up until the seatback releases, and push the seatback, sliding it forward.
12
01
02
03Ab
01
02
0304
01
01
02
02