windshield wipers NISSAN ALTIMA 2008 L32A / 4.G Quick Reference Guide

INTELLIGENT K EY SYSTEM
The Intelligent Key system allows you to lock or unlock your vehicle, open your trunk and start the engine.
Note: It is important to make sure the Intelligent Key is with you (that is, in your pocket or purse).
 The operating range of the door and trunk lock/unlock function is approximately 31 in (0.8 m).
 Locking the vehicle - Push any door handle Request Switch 01 once.
 Unlocking the vehicle - Push any door handle Request Switch 01 once. The corresponding door will unlock. Push the door handle Request Switch 01 again within 5 seconds; all other doors will unlock.
o Pe NING tH e tRUNK
 To open the trunk release using the Request Switch, your Intelligent Key must be with you.
 Push the Request/Release Switch 02 located to the far right under the trunk handle.
 Pull up and out on the handle to open the trunk.
S tAR tING tH e eNGIN e
 Depress the brake pedal (CVT) or clutch pedal (MT).
 Push the ignition switch to start the engine.
t URNING tH e eNGIN e oFF
 Shift the selector lever to the P (Park) position (CVT) or to the N (Neutral) position (manual transmission) and apply the parking brake.
 Push the ignition switch to turn the engine off.
IN te LLIG eN t K eY P oRt
 If the battery of the Intelligent Key is almost discharged, the guide light of the Intelligent Key port blinks and the Intelligent Key insertion indicator is displayed in the vehicle information display.
 To start the engine, insert the Intelligent Key into the key port in the direction indicated until it latches into place.
 To remove the Intelligent Key from the port, push the ignition switch to turn the engine off and pull the Intelligent Key out of the port.
 The Intelligent Key port does not charge the Intelligent Key battery. If you see the low battery indicator, replace the battery as soon as possible. Refer to the Owner’s
Manual for detailed information regarding changing the battery.
01
02
2
WINDSHIELD WIPER/WASHER SWITCH
 The ignition switch must be in the ON position to activate the windshield wipers.
 Push the lever down to operate the windshield wipers.
 Switch operation includes:
INT Intermittent – Wipers operate intermittently and can