NISSAN ALTIMA COUPE 2009 D32 / 4.G Quick Reference Guide

SETTING UP YOUR PHONEBOOK – ADDING NEW ENTRIES
Each paired phone has its own dedicated phonebook. Each phonebook can store up to 40
names. Each name can have up to 4 locations/numbers: Home, Office, Mobile, and Other.
NOTE:The vehicle must be stationary when adding new entries.
1. Press the
button and wait for the tone.
2. Say “Phonebook”.
3. Wait for the tone, then say “New entry”.
4. When prompted, saythename forthe new entry. Forexample, say“Michelle”. Ifthe
name is too short or too long, or if it sounds too much like a name that is already stored
in the phonebook, the system tells you and prompts you to say a name again. Choose a
new name.
5. Say “Yes” or “No” when the system asks you to confirm the name is correct.
6. Say alocation (“Home,” “Office,” “Mobile” or “Other”)whenthesystem asksyouto
provide one. The system acknowledges the location.
 By Voice command -When prompted, sayaphone number forthe location. For
example, say“five fivefiveone twoone two”. Thesystem repeats thenumber and
prompts you for the next command.
 By Bluetooth transfer - When prompted, say “Transfer entry”. The system acknowl-
edges the command and asks you to initiate the transfer from the phone handset. The
new contact phonenumber willbetransferred fromthecellular phoneviathe
Bluetooth communication link.Thetransfer procedure variesaccording toeach
cellular phone. See the cellular phone owner’s manual for details.
7. Say “Store” when you are finished entering numbers. The system confirms the name,
location, and number.
8. Say “Yes” or “No” when the system asks if you would like to store another location for the
same name. If you do not respond to the system prompt, the system ends the New Entry
session.
MAKING A PHONE CALL
1. Press thebutton.
2. After the tone, do one of the following:
 Say “Call [name] [location]”. For example, say “Call Michelle Home”.
 Say “Call [number]”. For example, say “Call 123-456-7891”.
 Say “Redial” to redial the previous phone number called by the system.
 Say “Call International” to dial more than 10 digits or any special characters.
RECEIVING/ENDING A PHONE CALL
When you receive a phone call, a ring tone sounds through the audio system.
 To accept the call, press the
button. To reject the call, press thebutton.
 To hang up the phone at the end of a call or to disconnect during call placement, press
the
button.19

HOW TO SAY NUMBERS
NISSAN voice recognition permits numbers to be spoken in a variety of ways. Say “zero” or “oh” for “0”. Example: 1-800-662-6200 – Say “one eight zero zero six six
two six two oh oh”.
 Say “pound” for“#”. Say“star” for“*”(available whenusingthe“Call International”
command, and the “Send” command during a call) .
 Say “plus” for “+” (available only when using the “Call International” command) .
 Say “pause” for a 2 second pause (available only when storing a phonebook number) .
BLUETOOTH HANDS-FREE PHONE SYSTEM (Navigation System
only – if so equipped)
With anoverhead microphone andsound
transmitted throughtheaudio system
speaker, theBluetooth Hands-Free Phone
System utilizesBluetooth wirelesstechnol-
ogy, touch-screen, andvoice recognition to
provide hands-free cellularphonecommuni-
cation.
SYSTEM OPERATING TIPS
 Close allwindows. Surrounding noises
may interfere with system operation and
performance.
 Press the
button on the steering wheel to activate voice recognition.
 Wait for the “Please say a command” prompt and the listening tone before speaking.
 Begin speaking a command within 1.5 seconds of the listening tone.
 To cancel a voice recognition session, press and hold the
button or press the
button.
 Toincrease ordecrease thevolume ofthe voice prompts, pushthe+or –(volume)
control buttons onthe steering wheelorturn theVOL (volume) knobonthe audio
system while the system is responding.
 Speak in a clear and natural voice without pausing between words.
 Some commands are not available while the vehicle is in motion.
 The “Help” command will bring up the voice recognition command list.
 Please refer to the cellular phone manufacturer Owner’s Manual for detailed information
regarding your Bluetooth phone.
 For recommended phones and detailed instructions, please visit
www.nissanusa.com/bluetooth .
20

PAIRING YOUR PHONE
Before using the hands-free feature, you need to set-up, or pair, the system to recognize your
compatible cellular phone(s) . Five Bluetooth-enabled phones can be paired. After set-up,
the system automatically connects with a paired phone when the ignition is in the ACC or ON
position, as long as the phone is on and in the vehicle.
PAIRING PROCEDURE
NOTE:Thevehicle mustbestationary whenpairing
the phone.
INITIAL PAIRING
NOTE: Thisprocedure canonly beused topair the
first phone to the system.
1. Press the
button on the steering wheel.
2. A message is displayed. Press the
button again.
3. The system willdirect youtoSETUP –>Phone –>Bluetooth Setup–>Pair Phone
menu.
4. Touch one of the “None (Add New)” keys.
5. Initiate pairing from the phone.
 The pairing procedure for cellular phones varies according to each cellular phone
model. For detailed pairing instructions and a list of compatible phones, please visit
www.nissanusa.com/bluetooth .
 The PINcode willappear onthe screen; enter“1234” from thehandset. (ThePIN
code is assigned by NISSAN and cannot be changed.)
6. When thepairing iscomplete, thescreen willshow thephone’s listedname onthe
paired phone list screen.
PAIRING ADDITIONAL PHONES/INITIAL PAIRING
NOTE: Thisprocedure canbeused topair thefirst
phone and other additional phones to the system.
1. Press the SETUPbutton on the control panel.
2. Touch the “Phone” key on the touch-screen.
3. Scroll tothe bottom ofthe listand touch the
“Bluetooth Setup” key.
4. Touch the “Pair Phone” key, then touch one of the “None (Add New)” keys.
5. Initiate pairing from the phone.
 The pairing procedure forcellular phones variesaccording toeach cellular phone
model. For detailed pairing instructions and a list of compatible phones, please visit
www.nissanusa.com/bluetooth .
 The PINcode willappear onthe screen, enter“1234” from thehandset. (ThePIN
code is assigned by NISSAN and cannot be changed.)
21

6.When thepairing iscomplete, thescreen willshow thephone’s listedname onthe
paired phone list screen.
SETTING UP YOUR PHONEBOOK - ADDING NEW ENTRIES
Up to 70 phone numbers can be stored in the phone-
book.
NOTE: Thevehicle mustbestationary whenadding
new entries.
1. Press the SETUPbutton, then touch the “Phone”
key.
2. Touch the “Phonebook” key.
3. Touch one of the “None (Add New)” keys from the
name listofthe phonebook. Therearedifferent
methods toinput aphone number. Selectoneof
the following options:
 Enter DatabyKeypad -Input thename and
phone number manually.
 Downloaded Phonebook-Select anentry fromalist ofphone numbers youhave
already transferred from your phone to your vehicle.
 Outgoing Calls - Store the name and phone number from the outgoing call list.
 Incoming Calls - Store the name and phone number from the incoming call list.
 Bluetooth - Transfers an entry from your cellular phone to the Downloaded Phone-
book in the vehicle. The memory sending procedure from the cellular phone varies
according to each cellular phone model. See the cellular phone owner’s manual for
more details.
MAKING A PHONE CALL
1. Press thebutton on the steering wheel.
2. After the tone, do one of the following:
 Say “Phone Dial” then follow the voice prompts
to input thephone number. Afterthephone
number has been said, say “Dial”.
 Say “Phonebook ”. For example, say “Phonebook Michelle”.
 Say “Phone Redial” to redial the previous phone number called by the system.
RECEIVING/ENDING A PHONE CALL
When youreceive aphone call,aring tone sounds
through the audio system (if enabled) .
 To accept thecall, press the
button onthe
steering wheel or touch the “Answer” key. To reject
the call, touch the “Reject Call” key.
22

To hang up the phone at the end of a call or to disconnect during call placement, press
the
button.
HOW TO SAY NUMBERS
NISSAN Voice Recognition permits numbers to be spoken in a variety of ways.
 Say “zero” or “oh” for “0”. Example: 1-800-662-6200 – Say “One eight zero zero six six
two six two oh oh”.
 Say “Pound” for “#”. Say “star” for “*”. Example: 1-555-1212*123 – Say “One five five
five one two one two star one two three”.
NISSAN VOICE RECOGNITION SYSTEM (Navigation System only)
The NISSAN VoiceRecognition systemallowshands-
free operation of the systems equipped on this vehicle,
such as the phone and navigation systems.
To operate NISSAN VoiceRecognition, pressthe
button located onthe steering wheel.Thenspeak the
command forthe system youwish toactivate. The
command given is picked up by the microphone, and it is
performed whenitis properly recognized. Atthis time, NISSAN VoiceRecognition will
provide a voice and message (in the center display) to inform you of the command results. To
cancel the voice recognition, press the
button or press and hold thebutton.
VOICE RECOGNITION COMMAND LIST
The following table lists some common voice recognition commands. For a complete list of
commands, say “Help.”
Destination Map Settings
Destination Phone Number Birdview Map
Destination Address Book Plan View Map
Destination Home North Up
Destination Nearby Places Heading Up
Destination < Voicetag > Zoom Level < 1-10 >
Destination Previous Destinations
Route Settings Phone
Recalculate Route Phone Dial
Cancel Route Phone Redial
Shortest Distance Route Phonebook
Phone Select
Phonebook < voicetag >
23

NAVIGATION SYSTEM (if so equipped)
GETTING STARTED
The Navigation System begins when the ignition switch is placed in the ACC or ON position.
To help ensure safe driving, some functions are grayed out, or muted, while driving. Park the
vehicle in a safe location and then operate the Navigation System.
BASIC FUNCTIONS
START-UP SCREEN
Read the precautions carefully, and touch the
“I agree” key to accept.
NAVIGATION DISPLAY SCREEN
 Displays navigation features and map.
DISABLED WHILE DRIVING
Not allfeatures canbemanually operated
while thevehicle isin motion. Thetextfor
these restricted featuresturnsfromwhite to
gray and cannot be selected. Alternatively, the
voice recognition systemmayhave arelated
command that can be used at any time.
24

DAY/NIGHT BUTTON
Press thebuttontoswitch be-
tween theday screen (bright) andthenight
screen (dark) . Within 10 seconds of pressing
the
button, you can adjust the
brightness ofthe map display screenby
touching the
key or thekey.
USING THE TOUCH-SCREEN
 To maneuver aroundthenavigation display
screen, touch the screen to select the item or
key displayed. Tomove around themap
screen, touch and hold to scroll around.
SETUP BUTTON
 Press theSETUP buttontochange or
set navigation preferences.
DEST (DESTINATION) BUTTON
 Press theDEST buttontodisplay the
address bookandalternative waysofpro-
gramming a destination.
MAP BUTTON
 Press theMAP buttontodisplay the
current location map screen.
INFO BUTTON
 Press theINFO buttontoview various
information including real-time traffic informa-
tion (requires a subscription to XM NavTraf-
fic™ service) and other navigation information.
25

ROUTE KEY
Press the MAPbuttonto show the cur-
rent location mapscreen. Touchthe“Route”
key while in a current location map screen to
display theRoute menuscreen. TheRoute
menu screen displays various ways to modify
the route to a destination.
ZOOM OUT/IN KEYS
 Touch the“ZOOM OUT” key orthe “ZOOM
IN” key toincrease ordecrease thescale of
the map display.
BACK KEY
 Touch the “Back” key to return to the previous
function shown on the navigation display.
VOICE KEY
 Touch the“Voice” keytohear thecurrent
navigation instructions.
SWITCHING THE MAP VIEW
 Press theMAP button.The current lo-
cation map screen is displayed.
 Touch the “Menu” key.
26

Touch the “Map view” key.
 Touch eitherthe“2D” key orthe “3D” key to
select themap view. Press theMAP
button
or the “Back” key toaccept the
changes.
2D PLAN VIEW
 Displays the map in a 2-dimensional environ-
ment similar to a road map.
3D BIRDVIEW™
 Displays the map in an elevated perspective.
SELECTING A MENU SCREEN
1. To select a preferred menu key, touch the corresponding key on the screen.
2. Depending on the key you selected, a detailed menu screen, a character input screen or
a setting screen, etc. is displayed. On the screen displayed, make adjustments, input
information, etc. accordingly.
3. Touch the “Back” key to return to the previous screen without applying any changes; in
some cases pressing the “Back” key will accept the changes you made.
4. Press theMAP button
toreturn tothe current location mapscreen without
applying any changes.
NOTE: Depending onthe menu selected, pressingtheMAP button
maynotreturn
you to the current location map screen.
27

STORING YOUR HOME IN YOUR ADDRESS BOOK
Press the DESTbutton.
 Touch the “Home (Add New)” key. If you have
already storedyourhome, thiskeymay not
appear.
 When you touch the “Home (Add New)” key, a
confirmation message is displayed. Touch the
“Yes” key.
 Touch the“Street Address” key. Acharacter
input screen is displayed.
 Enter theaddress ofyour home, touchthe
“OK” key. A list is displayed.
 Touch thepreferred homeaddress keyfrom
the list. You may need totouch thescroll
orkey to find the preferred home address
key.
 Your home isdisplayed atthe center ofthe
map. Aconfirmation messageisdisplayed,
and the system sets your home as the desti-
nation.
 Press theMAP button
toreturn tothe
current location map screen. The home icon is
displayed on the screen.
28