lock NISSAN ALTIMA COUPE 2009 D32 / 4.G Warranty Booklet

4
FOR HOW LONG AND WHAT IS
COVERED Q BASIC COVERAGE
• The basic coverage period is 36 months or 36,000 miles,
whichever comes fi rst.
• This warranty covers any repairs needed to correct defects
in materials or workmanship of all parts and components
of each new Nissan vehicle supplied by Nissan except for
the exclusions or items listed under the caption “WHAT IS
NOT COVERED” or, if the part is covered by one of the
separate coverages described in the following sections of
this warranty, that specifi c coverage applies instead of the
basic coverage.
• Bedliners will be repaired to commercially acceptable
standards subject to the conditions and limitations listed
in "WHAT IS NOT COVERED."
Q POWERTRAIN COVERAGE
• The Powertrain coverage period is 60 months or 60,000
miles, whichever comes fi rst.
• This warranty covers any repairs needed to correct defects
in materials or workmanship.
• Powertrain coverage applies to components listed below,
supplied by Nissan except for those items listed under the
caption “WHAT IS NOT COVERED”.
ENGINE
Cylinder heads and block and all internal parts, rocker
covers and oil pan, valve train and front cover, timing chain
and tensioner, oil pump, water pump and fuel pump, fuel
injectors, intake and exhaust manifolds and supercharger,
fl ywheel, seals, and gaskets.
TRANSMISSION AND TRANSAXLE
Case and all internal parts, torque converter and converter
housing, automatic transmission control module, transfer
2009 NEW VEHICLE LIMITED WARRANTY
1 Nissan indicates Nissan North America, Inc., P.O. Box 685003, Franklin, TN 37068-5003 which distributes Nissan vehicles in the United States.2 See the Owner’s Manual for information relevant to proper operation of the vehicle, including the recommended fuels and fl uids.WHO IS THE WARRANTORNissan
1 warrants all parts of your 2009 Nissan vehicle supplied
by Nissan, except for those listed elsewhere under the caption
“WHAT IS NOT COVERED.”
APPLICABILITYQ This warranty is provided to the original and subsequent
owner(s) of a Nissan vehicle originally distributed by
Nissan which is originally sold by a Nissan authorized
Nissan dealership in the United States, and which is
registered in the U.S. and normally operated in the
United States (including Alaska and Hawaii) , the United
States territories (specifi cally Guam, Saipan, American
Samoa, Puerto Rico and the U.S. Virgin Islands) , and
Canada.
Q This warranty is generally transferable from the
original ‘owner other than a Nissan dealer’ (OWNER)
to subsequent owners of the vehicle at any time
ownership of the vehicle is transferred, without any
action on your part; except that this warranty is not
transferable but is instead VOID if during the fi rst
six months after delivery to the original OWNER: (1)
ownership of the vehicle is transferred from the original
OWNER, and (2) the vehicle is registered outside of
the United States.
Q Your Nissan vehicle is manufactured to meet U.S.
regulations and environmental requirements. With
the exception of privately owned vehicles belonging to
members of the U.S. military or employees and offi cers
of the United States Government stationed abroad,
this warranty does not apply if an otherwise covered
vehicle is operated in, or relocated to, a country other
than those listed above under this caption, except that
it continues to apply if the vehicle is operated in full
compliance with its proper use as described in the
applicable OWNER’S MANUAL
2 while touring outside of the United States, the U.S. territories or
Canada for a period
not exceeding sixty (60) consecutive days or sixty (60) days in
any one 12 month period. Subject to the transferability restriction
described above, this warranty applies to a relocated vehicle
which is returned to, and is registered and normally operated
in the United States, the U.S. territories or Canada, except for
conditions due to the vehicle’s foreign operation, e.g., use of
inappropriate fuels or other fl uids.
LIMITATION OF WARRANTIES AND OTHER WAR-
RANTY TERMS AND STATE LAW RIGHTSEXTRA EXPENSES - LIMITATIONS OF DAMAGES
This warranty does not cover incidental or consequential
damages such as loss of the use of the vehicle, incon-
venience or commercial loss.ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FIT-
NESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED
TO THE DURATION OF THIS WRITTEN WARRANTY.
Some states do not allow the exclusion or limitation of incidental
or consequential damages or limitations on how long an implied
warranty lasts, so the above limitations or exclusions may not
apply to you. This warranty gives you specifi c legal rights, and
you may also have other rights which vary from state to state.
Nissan does not authorize any person to create for it any other
warranty, obligation or liability in connection with this vehicle.
THE WARRANTY BEGINSThe warranty period begins on the date the vehicle is delivered
to the fi rst retail buyer or put into use, whichever is earlier.
Nissan makes available to you, and you are specifi cally required
by Federal Law to use BBB AUTO LINE [(800) 955-5100] before
exercising rights or seeking remedies under the Federal Magnuson-
Moss Warranty Act, 15 U.S.C. §2301, et. seq. You are not required
to fi rst use BBB AUTO LINE if you seek remedies not created by
Title I of that Federal law, except that you are required to fi rst use
BBB AUTO LINE in good faith if you seek remedies created by
state law, including your state's lemon law, if applicable state law
provides for using a 703 compliant or similar process before fi ling
suit. Please refer to pp. 2-3 of this booklet and the "Supplement to
2009 Nissan Warranty Information Booklet & 2009 Nissan Owner's
Manual" for additional information.

22PROPER TIRE REPAIRNOTE: Goodyear and Dunlop do not warrant any inspection
or repair process. The repair is entirely the responsibility
of the repairer and should be made in accordance with
established Rubber Manufacturers Association (RMA)
procedures.THE CONVENIENCE (TEMPORARY)
SPAREThe Convenience (Temporary) Spare is designed, built,
and tested to the high engineering standards set by North
America’s leading car manufacturers and to Goodyear
and Dunlop’s own high standards of quality control. It is
designed to take up a minimum of storage space and, at the
same time, fulfi ll the function of a spare tire when needed.
The spare is kept in its storage space, fully infl ated at 60
psi. To be sure it is always ready for use, the air pressure
should be checked on a regular basis.
The Convenience (Temporary) Spare can be used in
combination with the original tires on your vehicle. You
can expect a tire tread life of up to 3,000 miles (4,800
kilometers) , depending on road conditions and your driv-
ing habits. To conserve tire tread life, return the spare to
the storage area as soon as it is convenient to have the
standard tire repaired or replaced.
The Convenience (Temporary) Spare weighs less than a
standard tire so it’s easier to handle. It also helps reduce
the total car weight which contributes to fuel economy.
The wheels used with the Convenience (Temporary) Spare
are specifi cally designed for use with high pressure spares
and should never be used with any other type tire.
GOODYEAR/DUNLOP TIRE LIMITED WARRANTY
DON’T ATTEMPT TO MOUNT YOUR OWN
TIRESSerious injury or Death may result from explosion of tire/rim
assembly due to improper mounting procedures. Follow
tire manufacturer’s instructions and match tire diameter to
rim diameter. Mount light truck radials on rims approved for
radial service. Do not apply bead sealer. This can inhibit
bead seating. Lubricate beads and tire rim (including tube or
fl ap) contact surfaces. Lock assembly on mounting machine
or place in safety cage. STAND BACK and never exceed
40 psi to seat beads. Never use a volatile substance or
a rubber “donut” (also known as a bead expander or “O-
Ring”) to aid bead seating. Only specially-trained persons
should mount tires.DON’T MIX TIRES OF DIFFERENT SIZES
AND TYPES ON THE SAME AXLEFor optimum handling and control, Goodyear and Dunlop
recommend fi tment of four (4) tires of the same type and size
unless otherwise specifi ed by the vehicle manufacturer.
WARNING: Before you replace your tires, always consult
the vehicle owner’s manual and follow the vehicle manufac-
turer’s replacement tire recommendations. Vehicle handling
may be signifi cantly affected by a change in tire size or type.
When selecting tires that are different than the Original
Equipment size, see a professional installer in order to make
certain that proper clearance, load carrying capacity and
infl ation pressure is selected. Never exceed the maximum
load capacity and infl ation pressure listed on the sidewall of
the tire. Always drive safely and obey all traffi c laws. Avoid
sudden, sharp turns or lane changes. Failure to follow this
warning may result in loss of control of the vehicle, leading
to an accident and serious injury or death. When replacing tires, you must maintain the outside diam-
eter and load carrying capacity of the Original Equipment
tire. Infl ation pressure may need to be adjusted to avoid
overloading the tire. Consult the Tire & Rim Association
Load and Infl ation Tables, ETRTO or JATMA standards for
correct load and infl ation information.
NEVER FIT TIRES TO A VEHICLE THAT
HAVE LESS LOAD CARRYING CAPACITY
THAN AS REQUIRED BY THE ORIGINAL
EQUIPMENT MANUFACTURERExamples: Many vehicles, such as large passenger vans,
require Load Range E tires as designated by the vehicle
manufacturer. Fitment of a tire, such as a Load Range D,
with less carrying capacity is not allowed.
In other cases, tires of the same size may carry different
load indexes in the service description. You must make
certain the replacement tires fi tted to the vehicle have a
load carrying capacity equal to or greater than what the
Original Equipment manufacturer specifi es.FOLLOW THESE ADDITIONAL
GUIDELINESFit newest tires on rear axle. If radials and non-radials must
be fi tted to the same vehicle, fi t radials on rear axle. Never
mix radials and non-radials on the same axle. When fi tting
snow tires or all-season tires to performance vehicles,
always fi t in sets of four. It is not recommended to fi t tires
with different speed ratings. If tires with different speed
ratings are installed on a vehicle, they should be installed
with like pairs on the same axle. The speed capability of
the vehicle will become limited to that of the lowest speed
rated tires. It is also recommended that the lower speed
rated tires be placed on the front axle regardless of which
axle is driven to help prevent potential oversteer.(Continued on page 23)

35
HAZARDSObjects in the road that threaten a tire should be safely
avoided. These objects are potholes, glass, metal, rocks,
wood debris and the like. Unavoidable contact should
prompt a thorough tire inspection.
You may not always recall hitting an object that can damage
or injure your tires. If while driving your vehicle experiences
any unusual vibrations, ride disturbance or noise and/or
you suspect that possible damage to the tires or vehicle
has occurred, DO NOT JAM OR LOCK YOUR BRAKES!
Rather reduce your speed and drive with caution until you
can safely pull off the road. Stop and inspect the tires. If
the tire is underinfl ated or damaged, defl ate, remove the
tire and rim assembly and replace it with your spare. If you
cannot detect a cause, have the vehicle towed to the nearest
vehicle or tire dealer to have the vehicle inspected.REPAIRING, MOUNTING AND
DEMOUNTING OF TIRESDo not attempt to repair, mount or demount a
tire yourself. Tire changing can be dangerous and
must be done by professionally trained persons using
proper tools and procedures as specifi ed by the Rubber
Manufacturers Association (RMA) . Follow these
mounting recommendations. Your tires should be
mounted on wheels of correct size and type and which are
in good, clean condition. Bent, chipped or rusted wheels
may cause tire damage. The inside of the tire must be free
from foreign materials. Have your dealer check the
wheels before mounting new tires. Mismatched tires
and rims can explode during mounting. Also, mismatched
tires and rims can result in dangerous tire failure on the
road. If a tire is mounted by error on the wrong-sized rim,
do not remount it on the proper rim - scrap it. It may be damaged internally (which is not externally visible) by being
dangerously stretched and could fail on the highway.
Old valves may leak. When new tubeless tires are mounted,
have new valves of the correct type installed. Tubeless tires
must be mounted only on wheels designed for tubeless
tires, i.e., wheels which have safety humps or ledges.
Never perform a temporary repair, use an innertube or
inject sealant as a permanent substitute for a proper
repair. Only qualifi ed persons should repair tires.
Be sure that all your valves have suitable valve caps. This
will keep valve cores clean and clear and guard against
leakage.
REPAIRS - WHENEVER POSSIBLE, SEE A TIRE
DEALER AT ONCE. Some tire manufacturers do not
warrant any inspection or repair process. The repair is
entirely the responsibility of the repairer. Punctures in the
tread of a passenger tire which do not exceed 1/4 of an inch
(6mm) in diameter can usually be repaired by following the
Rubber Manufacturer's Association (RMA) Passenger and
Light Truck Repair procedures. Contact the manufacturer of
your tires for its position and assistance as to the acceptable
location for a proper repair and the repair of speed rated
tires. Do not use plug repairs. They may cause further
damage to the tire. They are not always air tight and
the plug may fail. Do not exceed posted speed limits on
any repaired tire. Certain tire manufacturers speed ratings
are voided if the tire is repaired.
Although a tire was properly repaired, internal structural
damage resulting from the puncture may have occurred. Sometime later the damage may cause the tire to be
removed from service.
If the tire has a puncture in the tread which exceeds 1/4 inch
(6mm) , the tire must be replaced. If any tire has sustained a
puncture, have the tire inspected internally by a tire dealer
for possible damage that may have occurred.
Improper mounting and infl ation procedures can cause an
explosion of the tire/rim assembly. Only specially trained
persons should perform these tasks. Contact your tire store
or dealer for assistance.
CAUTION - Never, under any circumstance,
introduce a fl ammable substance into a tire.
WHEEL ALIGNMENT AND BALANCINGWheel alignment and balancing are important for safety
and maximum mileage from your tires. Check how your
tires are wearing at least once a month. If your tires are
wearing unevenly, such as the inside shoulder of the tire
wearing faster than the rest of the tread, or if you detect
excessive vibration, your vehicle may be out of alignment
or balance. These conditions not only shorten the life of
your tires, but adversely affect the handling characteristics
of your vehicle which could be dangerous. If you detect
irregular wear or vibration, have your alignment and
balance checked immediately. Tires which have been run
underinfl ated will show more wear on the shoulders than
in the center of the tread.
* Provided by and published at the request of the tire
manufacturers/warrantors.
IMPORTANT TIRE SAFETY INFORMATION*
(Continued on page 36)