display NISSAN ALTIMA HYBRID 2010 L32A / 4.G Navigation Manual

Icons of various categories of locations can be
displayed on the map.
DISPLAYING MAP ICONS
Map icons can be displayed or hidden by type.
1. Touch “Map Menu” while the current loca-
tion map screen is displayed.2. Select “Map Icons”.
NMA0053NMA0042
LOOKING AT INFORMATION ON THE
MAP
Map settings3-21

3. Select the preferred icon. The icon display
setting toggles between on and off each
time the key is touched. The indicator of the
selected icon illuminates.4. Press MAP to return to the current location
map screen. The activated icons are dis-
played on the map.
INFO:
If registered in the map data, the brand icons will
be displayed on the map instead of the general
map icons listed below.
Map icons that can be displayed
●
Restaurant
●
Gas Station
●
Hotel
●
AT M
●
Rest AreaOther settings
Landmark icons can also be set using the follow-
ing procedure.
NMA0043NMA0044
3-22Map settings

1. Press SETTING.
2. Select “Navigation”.
3. Select “Map Icons”.
INFO:
The map icons are not displayed on the map
screen when the map scale is set to 1/4 mile
(500 m) or higher in the 2D map, or to 1 mile (2
km) or higher in Birdview™ map.
MAP SCROLLING INFORMATION
Information about the location on which the cen-
ter of the cross pointer is placed can be set to be
displayed.
1. Press SETTING.2. Select “Navigation”. 3. Select “Others”.
NMA0045NMA0046NMA0047
Map settings3-23

4. Select “Map Scrolling Information”. 5. Select the preferred information item. The
indicator of the selected information item
illuminates.
Available information items:
●“Address Book Icons”
●“Destination/Waypoint Icons”
●“Latitude/Longitude Info.”6. Press MAP to return to the current location
map screen. Move the cross pointer to the
set location to display the information.
MAP SYMBOLS
This navigation system uses symbols to display
facilities.
LNV0581NMA0049NMA0050
3-24Map settings

ROAD COLOR
The road types are differentiated by colors.
Freeway: Red or Light Red (zoomed in)
Main road: Brown or Dark Yellow
Narrow street: Gray
Road with incomplete map data: Dark green
TRAFFIC INFORMATION ON MAP
With a subscription to XM NavTrafficservice,
traffic information is displayed.
“Viewing available traffic information”
(page 7-4)
Free Flow: Green arrow
Moderate traffic: Yellow arrow
Heavy traffic: Red arrow
Section affected by serious traffic event: Purple
dashed arrowTraffic information icons:
: Accident
: Closed Road
: Information
: Road Work
: Slippery Road
: Weather
: Incident
Map settings3-27

INFO:
●It is also possible to select a region by touch-
ing the map on the right side of the screen.
●It is not possible to search for a route from the
continental United States to Hawaii.
SPECIFYING THE CITY
When searching for a destination with “Street
Address”, “Places”, “Freeway Entrance/Exit”,
“Intersection” or “City Center”, the search can
be narrowed down by specifying the city.1. Select “Select a City” or “City”. 2. Enter the name of the city, select “List”. A
list screen is displayed.
INFO:
Select “Last 5 Cities” to display 5 cities recently
set as destinations.
NDE0004NDE0010
4-4Setting a destination

3. Select the city of the destination from the
list.
INFO:
In some cases, when a city name has been
entered, the number of matching destinations in
the “Matches” column may be different from the
number displayed on the list screen. If this
occurs, enter more characters to further reduce
the number of matches.
FINDING AN ADDRESS
When the address of the destination is available,
use this method to enter the address and then
have the system calculate a route. A location
near the preferred destination can also be
searched for by entering the house number if the
map data contains the relevant data.1. Press DEST and select “Street Address”. A
character input screen is displayed.2. Enter the house number and select “OK”. If
the house number is not available, select
No House #. A street name input screen is
displayed.
NDE0005NDE0006NDE0007
Setting a destination4-5

3. Enter the name of the street. After finishing
the entry, selectList. A list of streets is
displayed.4. Select the correct street of the destination
from the list.
INFO:
In some cases, when a street name has been
entered, the number of matching destinations in
the “Matches” column may be different from the
number displayed on the list screen. If this
occurs, enter more characters to further reduce
the number of matches.5. The entire route is shown on the map. Se-
lect “Start” after confirming the location of
the displayed destination. The system sets
the destination to the selected location and
starts calculating a route.
INFO:
Even after setting a destination, the location of
the destination can be adjusted, the route can be
stored, etc.
“PROCEDURES AFTER SETTING A
DESTINATION” (page 5-2)
Voice command
1. Press
located on the steering wheel
switch.
NDE0008NDE0009NDE0011
4-6Setting a destination

2. After the tone sounds, speak a command.
To set the destination from a street address:
“Navigation” “Address” (Standard mode)
“Address” (Alternate command mode)
INFO:
When using a voice command to set a street
name, the complete street name is recom-
mended to be stated.
Examples:
Correct input — North Elm Street
East Jefferson Boulevard
Incorrect input — Elm Street
East Jefferson
FINDING A PLACE
There are 3 methods to set the destination to
places: typing the name, choosing a category or
selecting a Zagatreviewed location. To help
improve searching, different start points can be
chosen to search from such as Near Current
Location, Near the Destination, or a particular
city.
Finding a nearby place
1. Press DEST.
2. Select “Places”.3. Select the preferred nearby category from
the list.
A list screen is displayed.
INFO:
Select “Customize Nearby Places” to customize
the nearby places list to show categories that
are frequently used.
NDE0012NDE0013
Setting a destination4-7

4. Select the preferred destination from the
list. The position of the selected location is
displayed in the preview on the right side of
the screen.
INFO:
●A maximum of 100 facilities can be displayed
on the list screen.
●If the suggested route is already set, the sys-
tem displays only the facilities located along
the route.5. The entire route is shown on the map. Se-
lect “Start” after confirming the location of
the displayed destination. The system sets
the destination to the selected location and
starts calculating a route.INFO:
If there is a route already set, the new selected
location becomes a waypoint.Other settings:
The destination can be set by touching the cur-
rent or scrolled location map screen and select-
ing “Nearby Places”.INFO:
Voice command
1. Press
located on the steering wheel
switch.
2. After the tone sounds, speak a command.
To display the nearby category list and se-
lect the destination from it:
“Navigation” “Places” (Standard mode)
“Places” (Alternate command mode)
NDE0014NDE0015NDE0019
4-8Setting a destination