phone NISSAN ARMADA 2014 1.G 08IT Navigation Manual

Black plate (38,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
2-30Getting started
NGT00849. The system makes a call to 800-662-6200.
INFO:
. Speaking “800-662-6200” (10 continuous
digits) or “662-6200” (7 continuous digits)
is acceptable, if the area code is not
necessary. However the 3-3-4 digit group-
ing is recommended for improved recogni-
tion.
“How to speak numbers” (page 9-20)
. The NISSAN voice recognition system is not
limited to recognizing phone numbers of
only 7 or 10 digits. To dial a number in a
format other than the 3-3-4 digit grouping,
use the “International Call” command.
. If “Change Number” is spoken during phone
number entry, the system will automatically
request that the number be repeated using
the 3-3-4 format. In this case please say the
area code first and then follow the prompts. .
Do not add a “1” in front of the area code
when speaking phone numbers.
. If the system does not recognize a voice
command, please try repeating the com-
mand using a natural voice. Speaking too
slowly or too loudly may further decrease
recognition performance.
Example 2: Placing an international call to
the phone number 011-81-111-222-3333:
GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E1. Push located on the steering
wheel switch.
NGT00702. The system announces, “Would you like to access Phone, Navigation, Information,
Audio or Help?”.
3. Speak “Phone”.
NGT00794. Speak “International Call”.
NGT00875. Speak “01181111222333”.
NGT0088

Black plate (39,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
6. Speak “Dial”.
NGT00897. The system makes a call to 011-81-111-222-3333.
INFO:
Any digit input format is available in the
International Number input process.
Example 3: Setting a destination by a
street address:
GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E1. Push located on the steering
wheel switch.
NGT0070
2. The system announces, “Would you like to access Phone, Navigation, Information,
Audio or Help?”.
3. Speak “Navigation”.
JNB0277X4. Speak “Address”.
NGT00725. Speak the name of the state, “California”.
NGT00736. Speak the name of the city, “Gardena”.
NGT00937. Voice feedback will be provided when the command is accepted, and the list of city
names is displayed.
8. After the tone sounds and the icon on the screen changes again, speak “One”.
Getting started2-31

Black plate (63,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
4 Setting destination
Destination screen...
.................................................................... 4-2
Basic operation ...
.................................................................... 4-2
Changing region ...
.................................................................. 4-2
Finding address ...
................................................................... 4-4
Finding place ...
........................................................................\
4-5
Setting home as destination ...
......................................... 4-10
Searching from address book ...
...................................... 4-11
Setting previous destination ...
.......................................... 4-12 Setting previous start point
...
......................................... 4-13
Setting from stored routes ...
.......................................... 4-14
Setting by phone number ...
............................................ 4-14
Setting freeway entrance/exit ...
..................................... 4-15
Setting intersection ...
....................................................... 4-17
Setting city center ...
......................................................... 4-18
Setting point on map ...
.................................................... 4-19
Delete destination ...
................................................................. 4-20

Black plate (64,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
4-2Setting destination
GUID-B4313A38-BC05-4348-8845-A6EB7060328DThere are several methods available to set a
destination. Understand the advantages of each
method and select the best method for finding
and setting a preferred destination.
NDE0001BASIC OPERATIONGUID-5707D4BF-15D1-4042-B359-05757083C0B01. Push.
2. Highlight the preferred destination setting method and push .
Available setting itemsGUID-BFB0B4E2-15DF-4F01-A6AA-AFAC9A3A521D.[Street Address]:
Searches for a destination by address.
. [Places]:
Searches for a destination from various
categories of businesses or locations.
. [Home]:
Searches for a route from the current
location to the previously stored home
destination. .
[Address Book]:
Searches for a destination from the list of the
stored locations.
. [Previous Destinations]:
Searches for a destination from the previous
destinations.
. [Delete Destination]:
Deletes the currently set destination.
Available setting items (next page
screen)
GUID-C350C501-AE78-4D42-AB5D-BC52285217A5.[Previous Start Point]:
Sets the previous starting point as the
destination.
. [Stored Routes]:
Selects a stored route.
. [Phone Number]:
Searches for a point of interest by a
telephone number.
INFO:
The system cannot be used to search for
residential phone numbers. . [Freeway Entrance/Exit]:
Searches for a destination from a freeway
entrance/exit. .
[Intersection]:
Searches for a destination from intersec-
tions.
. [City Center]:
Sets the center of a city as the destination.
CHANGING REGIONGUID-A63AEEF5-3F7B-45D0-A675-62844EE6BD00When setting a destination, the location can be
narrowed down by specifying the region or city.
Specifying the regionGUID-DD861C51-4DC1-4A4E-9C25-815A4FBDAAC8
NDE00021. Push .
2. Highlight [Change Region] and push
.
DESTINATION SCREEN

Black plate (76,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
4-14Setting destination
2. After the tone sounds, speak a command.
To set the previous start point as the destination:
“Previous Start Point” (Alternate command
mode)
SETTING FROM STORED ROUTESGUID-69E3A472-F9B2-47DD-9E00-E7811C68452BA preferred route can be selected from the
stored routes.
NDE00451. Push.
2. Highlight [Next Page] and push .
NDE0048
3.Highlight [Stored Routes] and push
. A list screen is displayed.
NDE00494. Highlight the preferred route from the list
and push . The route to the
destination is set.
NDE00505. The entire route is shown on the map. Highlight [Start] after confirming the location
of the displayed destination, and push
. The system sets the destination
to the selected location and starts calculat-
ing a route.
INFO:
. Even after setting a destination, the location
of the destination can be adjusted, the
location can be stored, etc.
“Procedures after setting destination”
(page 5-2)
. The stored route includes only locations
(destination and waypoints) and route cal-
culation conditions, not the route itself.
Therefore, when the destination is set using
a stored route, a different route may be
suggested if the current vehicle location is
different from the one when the route was
stored.
SETTING BY PHONE NUMBERGUID-53B1745A-9772-4C56-B01F-3454785345FFIf the telephone number of the facility is
available, use this to find the facility by entering
the number, and then have the system calculate
a route.
INFO:
. Telephone numbers that were stored for
stored destinations can also be used.
. If the area code of the specified telephone
number does not exist in the map data, the
system will not search for the location.

Black plate (77,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
.Only the locations included in the database
in the map data can be searched by the
phone number. Residential phone numbers
cannot be used to search for a location.
NDE00451. Push .
2. Highlight [Next Page] and push .
NDE00513.Highlight [Phone Number] and push
. The telephone number input
screen is displayed.
NDE00804. Enter the telephone number including the
area code.
5. After finishing the entry, highlight [List] and push .
“Number input screen” (page 2-16)
NDE00816. Displays a list screen if there are two or
more search results. Highlight the preferred
destination from the list and push
.
A confirmation screen for the place name
and the location is displayed, and the system
starts calculating.
NDE00827. The entire route is shown on the map.Highlight [Start] after confirming the location
of the displayed destination, and push
. The system sets the destination
to the selected location and starts calculat-
ing a route.
INFO:
Even after setting a destination, the location of
the destination can be adjusted, the route can
be stored, etc.
“Procedures after setting destination”
(page 5-2)
SETTING FREEWAY ENTRANCE/EXITGUID-E4CA34C9-8760-4A9A-9D8A-9FCCEA257ECBThe entrance or exit of a freeway can be set as
the destination to which the system calculates a
route.
Setting destination4-15

Black plate (89,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
NRG00851.Highlight [Move Location] and push
.
INFO:
The screen for adjusting the location also
changes by touching the map screen dis-
played on the right side of the screen.
NRG00862. Adjust the location by moving the cross pointer across the map and push
. The location of the destination
is modified.
INFO:
. The map scale can be changed by pushing
or (if so
equipped) . The map scale can also be
changed by touching the scale icon.
. The same screen as when [Move Location]
is touched can be displayed with the
following operations:
— Touching the map screen.
— Pushing the directional buttons except
up/down buttons (multi-function control-
ler with directional buttons).
— Pushing the slide switch except upward/ downward (multi-function controller with-
out directional buttons).
STORING LOCATIONGUID-2C0D9103-16C4-4B17-8344-FD9DDDFAEA38A searched location can be stored in the
Address Book. Then it can be easily retrieved
and set as a destination (or waypoint).
NRG00871. Highlight [Store Location] and push
.
NRG00882. The location is stored in the Address Book.
The corresponding icon is displayed at the
set location on the map.
VIEWING INFORMATION ABOUT
SEARCHED LOCATION
GUID-9D0F6DB1-9A69-4BAB-8D5B-154EBC40AC56Information (street address and phone number)
about places stored in the map data can be
displayed.
Route guidance5-5

Black plate (90,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
5-6Route guidance
NRG00891. Select [Place Info] and push.
JNE0141X2. Information about the location is displayed.
3. Push to return to the previous
screen.
INFO:
. If [Call] is displayed on the right side of the
screen, it is possible to call the location
indicated.
. The Bluetooth
®Hands-Free Phone system
is required to be active and the cellular phone must be connected to call the
location indicated.
. Information about locations is not displayed
while driving.

Black plate (123,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
2. Highlight the stored home location or pre-ferred stored address and push .
INFO:
Highlighting [Sort] displays a list of various
sort functions.
To use the sort functions, stored locations
must be set in advance.
“Storing location” (page 6-2)
NST00273. Highlight the preferred item and push
.
Available setting itemsGUID-11E36B18-BAC8-4AB4-BA4D-8ED1FA243F45.[Edit]:
Edits the stored address information.
. [Move Location]:
Adjusts the location of the stored address.
. [Delete]:
Deletes the stored address. .
[OK]:
Applies the settings.
Other settingsGUID-A54EAF28-00A6-4213-912B-0409FFD86F4EA stored address can also be edited using the
following procedure.
NST00281. Push .
2. Highlight [Address Book] and push
.
3. Highlight [Store/Edit] and push .
MINOR ADJUSTMENT OF HOME OR
STORED ADDRESS
GUID-5C45809F-A832-42A0-AA2D-3DB62DB19A07When [Edit] is selected, you can edit the
following items of the home or stored location
can be edited.
. [Show Icon on Map]
. [Name] (only for stored locations) .
[Voicetag] (only for stored location)
. [Icon]
. [Sound]
. [Direction]
. [Distance]
. [Phone No.]
. [Group] (only for stored locations)
. [Entry Numbers] (only for stored locations)
Show icon on mapGUID-325FCB43-73E7-4D55-925F-D2B70883D061Displays the home icon or the stored address
icon on the map.
NST00291. Highlight [Edit] and push .
2. Highlight [Show Icon on Map] and push .
3. The indicator illuminates when the item is set. Then the system displays the icon on
the map.
Storing location/route6-9

Black plate (126,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
6-12Storing location/route
1. Highlight [Direction] and push.
A map screen with the home or stored
location located on the map center is
displayed.
NST00402. Set the direction that sounds the alarm and push .
The selected direction is set.
INFO:
After the direction is set and [Direction] is
selected and set again, a confirmation
message is displayed. Confirm the contents
of the message, highlight [Yes] and push
. The set direction is overwritten.
DistanceGUID-43E07CD2-1AAF-4C53-BDE1-25A07378207FSets the alarm to sound when reaching a
specific distance to the home or stored address.
NST00411. Highlight [Distance] and push .
NST00422. Highlight the preferred distance option and
push . The indicator of the
selected distance illuminates.
Available distance options:
. 150 feet (50 m)
. 300 feet (100 m) .
1000 feet (300 m)
. 1500 feet (500 m)
INFO:
Once the direction and the distance to sound an
alarm are set, the system will sound the alarm
when the vehicle enters the triggering zone.
Phone No.GUID-359D96A5-C421-45DE-BA3A-1F8660BDE4F8Stores the telephone number of the home or a
stored location.
NST00431. Highlight [Edit] and push .
2. Highlight [Phone No.] and push .
The telephone number entry screen is
displayed.