phone NISSAN ARMADA 2014 1.G 08IT Navigation Manual

Black plate (127,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
NST00443. Enter the telephone number of the home orstored location.
“Number input screen” (page 2-16)
4. Highlight [OK] and push .
The telephone number is stored.
INFO:
If the phone number of the home or a location is
stored, the phone number can be used to search
for the destination even if it is not included in the
map data.
Group (only for stored locations)GUID-C26E66D3-AB03-4DD4-AC79-BB63F07F735FThis groups the stored locations.
By grouping the stored locations, the [By Group]
option of the sort function can be used more
effectively in the [Sort Entries] mode.
NST00451. Highlight [Group] and push .
NST00462.Highlight the preferred group and push
.
When the indicator of the selected group
illuminates, the stored location is classified
into the applicable group.
Entry Number (only for stored locations)GUID-4D4334A7-A29D-407A-9FD4-9C6DBE70F813Index the position numbers of any two stored
locations in the list.
NST00471.Highlight [Entry Number] and push
.
A list of stored locations is displayed.
NST00482.Highlight the stored addresses that you
want to change and push .
The position numbers of the selected stored
locations are changed.
Storing location/route6-13

Black plate (160,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
8-2Other settings
GUID-6C304C6D-8E4E-46F1-A8AC-ED4AC968621EThe navigation system can be customized to
make it easier for you to use.
BASIC OPERATIONGUID-99F3AE8C-0AFC-4B27-8A61-549AFD35A036
NSE00011. Push.
2. Highlight the preferred setting item and
push .
Available setting itemsGUID-788F0E55-36DC-4D36-9419-8D162954A5FB.[Navigation]:
Adjust various settings of the navigation
system.
“Navigation setting” (page 8-6)
. [Audio]:
Refer to the vehicle Owner’s Manual.
. [Phone]:
Refer to the vehicle Owner’s Manual.
. [Bluetooth]:
Set Bluetooth
®Audio and Phone.
Refer to the vehicle Owner’s Manual. .
[Volume and Beeps]:
“Volume adjustment” (page 8-11)
. [Rear Display] (if so equipped):
Refer to the vehicle Owner’s Manual.
. [Display]:
“Display settings” (page 8-3)
. [Clock]:
“Clock settings” (page 8-12)
. [Others]:
— [Comfort]:
This item is displayed when the ignition
switch is in the ON position.
Refer to the vehicle Owner’s Manual.
— [Language and Units]:
“Language and unit settings”
(page 8-13)
— [Voice Recognition]:
“System feedback announcement
modes” (page 9-20)
— [Camera] (if so equipped): Refer to the vehicle Owner’s Manual.
— [Sonar] (if so equipped): Adjust the parking sensor detection
sensitivity, etc.
Refer to the vehicle Owner’s Manual. — [Image Viewer]:
Refer to the vehicle Owner’s Manual.
INFO:
The displayed items vary depending on the
equipped options.
SETTINGS SCREEN

Black plate (169,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
2. Highlight [Reset All Navigation Settings toDefault] and push .
NSE00313. A confirmation message is displayed. Con-
firm the contents of the message, highlight
[Yes] and push .
GUID-D00AB857-D296-4374-A005-8013A4B67B71This turns on and off, as well as adjusts, the
phone function (ringer, incoming and outgoing
volume) , the voice guide function and the beep
function.
BASIC OPERATIONGUID-7ED08D2C-19B2-4688-8D21-00F4BAB9AF8C
NSE00321. Push.
2. Highlight [Volume & Beeps] and push
.
3. Highlight the preferred adjustment item and push .
4. Use the multi-function controller to adjust the volume. Push to set to on or
off.
5. After setting, push or
to apply the setting.
6. Push to return to the previous
screen. Push

Black plate (176,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
9-2Voice recognition
GUID-17D4DE16-8733-494D-9B1C-E8BF4EEC3C18NISSAN Voice Recognition allows hands-free
operation of the navigation system and other
systems equipped on this vehicle, in one of two
modes, Standard Mode or Alternate Command
Mode. Standard Mode allows the operation of
Navigation, Phone, Audio, Information and Help.
The commands that are available are always
shown on the display and announced by the
system. To perform operations, simply follow the
prompts given by the system. In Standard Mode,
hands-free operation of Change map view,
Route selection and Bluetooth Audio, etc. is
not available through Voice Recognition.
Alternate Command Mode allows advanced
operations. When this mode is active, an
expanded list of commands can be spoken after
pushing >, and the voice command
menu prompts are turned off. Note that in this
mode the recognition success rate may be
affected because the number of available
commands and ways of speaking each com-
mand are increased. Otherwise, it is recom-
mended that Alternate Command Mode be
turned OFF and Standard Mode be used for
the best recognition performance.
“Alternate command mode” (page 9-12)
INFO:
. To improve recognition success when Alter-
nate Command Mode is active, try using the
Speaker Adaptation function available in that
mode.
“Speaker adaptation” (page 9-21)
Otherwise, it is recommended that Alternate
Command Mode be turned OFF and Stan-
dard Mode be used for the best recognition
performance.
. For the voice commands for the audio,
phone and other systems, refer to the
vehicle Owner’s Manual. The following sec-
tions refer only to the navigation, phone and
information systems.
. The voice recognition system cannot be
operated when the soft top is not closed (for
Roadster and CrossCabriolet models).
NISSAN VOICE RECOGNITION

Black plate (177,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
GUID-1A7F9479-B441-4CC0-A44F-C5FB692BEF7A
CONFIRMING HOW TO USE VOICE
COMMANDS
GUID-2592E3C0-BDF8-4551-9FAC-29594FB61C40When operating the voice recognition system
for the first time or if help is preferred to use the
system, the User Guide can be displayed.
It is possible to confirm how to use voice
commands by accessing a simplified User
Guide, which contains basic instructions and
tutorials for several voice commands.
NVR0001
Basic operationGUID-6488BAB7-0650-4B8A-87AE-FB7FA85884821. Push.
2. Highlight [Others] and push .
3. Highlight [Voice Recognition] and push
.
4. Highlight [User Guide] and push
.
5. Highlight the preferred item and push
. Available items:
GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E.
[Getting Started]:
Describes the basics of how to operate the
voice recognition system.
. [Let’s Practice]:
Mode for practice following the system
voice.
. [Using the Address Book]:
Tutorial for entering a destination by the
Address Book.
. [Finding a Street Address]:
Tutorial for entering a destination by street
address.
. [Placing Calls]:
Tutorial for making a phone call by voice
command operation. Refer to the vehicle
Owner’s Manual for details.
. [Help on Speaking]:
Displays useful tips regarding speaking for
correct command recognition by the system.
INFO:
The Command List feature is only available when
Alternate Command Mode is active.
Getting StartedGUID-87426078-1A0F-4B63-9DFE-30E56773B915Before using the voice recognition system for
the first time, it is possible to confirm how to use
commands by viewing the Getting Started
section of the User Guide.
NVR00021. Highlight [Getting Started] and push
.
2. To confirm the page, scroll the screen using the multi-function controller.
Practicing voice commandsGUID-CDEFBC9E-A1CC-478F-A48F-9F01B52AD538Practice for using the voice recognition function
can be performed by repeating a phone number
after the system announces it.
Voice recognition9-3
STANDARD MODE

Black plate (179,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
GIVING VOICE COMMANDSGUID-D46E52BA-684D-4DAB-B605-1A96C8D32A151. Pushlocated on the steering
wheel switch.
NVR00062. A list of commands appears on the screen, and the system provides the voice menu
prompt “Would you like to access Phone,
Navigation, Information, Audio or Help?”.
3. After the tone sounds and the icon on the screen changes from [
] to [], speak a
command.
4. Continue to follow the voice menu prompts and speak after the tone sounds until the
preferred operation is completed.
Operating tipsGUID-4DC2C75C-9D70-45C4-B334-1290C6FC2DBB.Speak a command after the tone.
. Commands that are available are always
shown on the display and spoken through
voice menu prompts. Commands other than
those that are displayed are not accepted. Follow the prompts given by the system.
. If the command is not accepted, the system
announces, “Please say again”. Repeat the
command in a clear voice.
. Push once to return to the
previous screen.
. To cancel the command, push and hold
>. The message, “Voice can-
celed” will be announced.
. Push >to stop the voice prompt
and give the command at once. Remember
to wait for the tone before speaking.
. To adjust the volume of the system feed-
back, push the volume control buttons <+>
or <−> on the steering wheel switch or use
the audio system volume control knob while
the system is making an announcement.
How to speak numbersGUID-01530F6C-D312-4B81-9BB4-B74F714C9EE7NISSAN Voice Recognition requires a certain
way to speak numbers when giving voice
commands. Refer to the following examples.
General rule:
GUID-C7C06D28-6C87-4C20-A441-213FED35BE0EOnly single digits 0 (zero) to 9 can be used. (For
example, if speaking 500, “five zero zero” can be
used, but “five hundred” cannot. Examples:
GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E1-800-662-6200
“One eight zero zero six six two six two zero
zero”
Improving Recognition of Phone numbers:
Recognition of phone numbers can be improved
by saying the phone number in 3 groups of
numbers. For example, to call 800-662-6200,
say “Eight Zero Zero” first, and the system will
then ask to speak the next three digits. Then, say
“Six Six Two”. After recognition, the system will
then ask to speak the last 4 digits. Say, “Six Two
Zero Zero”. Using this method of phone digit
entry can improve recognition performance.
INFO:
For best recognition, speak “zero” for the
number “0” and “oh” for the letter “o”.
Voice recognition9-5

Black plate (180,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
9-6Voice recognition
Command ListGUID-50EA80A6-5D6D-4DD5-B5C1-2D09315AC7AB
Category Command:GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E
CommandAction
Navigation Operates Navigation function.
Phone Operates Phone function.
Information Displays vehicle Information function.
Audio Operates Audio function.
Help Displays User Guide.
Navigation Command:GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E
CommandAction
Destination Home Sets a route to the home that is stored in the Address Book.
Address Searches for a location by the street address specified, and sets a route (for continental U.S. only).
Places Sets a route to a facility near the current vehicle location.
Address Book Searches for stored information in the Address Book.
Previous Destinations Sets a route to a previous destination.
Information Command:GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E
Command Action
Fuel Economy Displays fuel economy information.
Trip Computer (if so equipped) Displays trip information.
Maintenance Displays maintenance information.
Traffic Information Displays the [Info On Route] screen when a route to the destination is set.
Displays the [Nearby Traffic Info.] screen when a route to the destination is not set.
Where am I? Displays the current location.

Black plate (181,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
Vehicle Phone Command:GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E
CommandAction
Dial Number Makes a call to a spoken phone number up to 10 digits.
Vehicle Phonebook Makes a call to a contact that is stored in the Vehicle Phonebook.
Handset Phonebook Makes a call to a contact that is stored in the mobile phone.
Call history Incoming Calls Makes a call to the incoming call number.
Outgoing Calls Makes a call to the dialed number.
Missed Calls Makes a call to the Missed calls number.
International Call Makes an international call by allowing more than 10 digits to be spoken.
Audio Command:GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E
CommandAction
AM Turns to the AM band, selecting the station last played.
FM Turns to the FM band, selecting the station last played.
XM Turns to the SiriusXM Satellite Radio band, selecting the channel last played.
CD Starts to play a CD.
General Commands:GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E
CommandAction
Go back Corrects the last recognition result to return to the previous screen
Exit Cancels Voice Recognition
Voice recognition
9-7

Black plate (182,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
9-8Voice recognition
INFO:
Refer to the vehicle Owner’s Manual for the
operations related to phone, information and
audio.
VOICE COMMAND EXAMPLESGUID-36141030-F0F1-4EAE-8988-C31ED0954808To use the voice recognition function, speaking
one command is sometimes sufficient, but at
other times it is necessary to speak two or more
commands. As examples, some additional basic
operations that can be performed by voice
commands are described here.
Example 1: Placing a call to the phone
number 800-662-6200
GUID-4E079BFC-1E8F-4C3B-B34B-7541D294319A1. Push located on the steering
wheel switch.
NGT00702. The system announces, “Would you like to
access Phone, Navigation, Information,
Audio or Help?”. 3. Speak “Phone”.
NGT00794. Speak “Dial Number”.
NGT00805. Speak “800”.
NGT0081
6. The system announces, “Please say next
three digits or dial, or say change number”.
Speak “662”.
NGT00827. The system announces, “Please say last fourdigits or say change number”. Speak
“6200”.
NGT00838. The system announces, “Dial or ChangeNumber?”. Speak “Dial”.

Black plate (183,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
NGT00849. The system makes a call to 800-662-6200.
INFO:
. Speaking “800-662-6200” (10 continuous
digits) or “662-6200” (7 continuous digits)
is acceptable, if the area code is not
necessary. However the 3-3-4 digit group-
ing is recommended for improved recogni-
tion.
“How to speak numbers” (page 9-20)
. The NISSAN voice recognition system is not
limited to recognizing phone numbers of
only 7 or 10 digits. To dial a number in a
format other than the 3-3-4 digit grouping,
use the “International Call” command.
. If “Change Number” is spoken during phone
number entry, the system will automatically
request that the number be repeated using
the 3-3-4 format. In this case please say the
area code first and then follow the prompts. .
Do not add a “1” in front of the area code
when speaking phone numbers.
. If the system does not recognize a voice
command, please try repeating the com-
mand using a natural voice. Speaking too
slowly or too loudly may further decrease
recognition performance.
Example 2: Placing an international call
to the phone number 011-81-111-222-
3333
GUID-92DB0F19-658E-4721-832B-070BE6F8526A1. Push located on the steering
wheel switch.
NGT00702. The system announces, “Would you like to access Phone, Navigation, Information,
Audio or Help?”.
3. Speak “Phone”.
NGT00794. Speak “International Call”.
NGT00875. Speak “01181111222333”.
NGT0088
Voice recognition9-9