key battery NISSAN CUBE 2010 3.G Quick Reference Guide

AcceSSORY POSi TiOn
Press the ignition switch START/STOP button once without depressing the brake pedal to
access the A cc position. This position activates electrical accessories such as the radio.

Press the ignition switch START/STOP button a second time without depressing the brake
pedal to access the O n position. This position turns on the ignition switch and all electrical
accessories.
niSSAn inTe LLiGenT keY™ BATTe RY diSc HARG e
if the battery of the intelligent k ey is completely discharged, the
i ntelligent key system warning light in the instrument panel blinks in
yellow after pushing the ignition switch START/STOP button. To start
the engine with a discharged intelligent key, perform the following
procedure:

Move the shift lever to the P (PAR k) position.

firmly apply the foot brake.

Touch the ignition switch START/STOP button with the intelligent
k ey. A chime will sound.

Push the ignition switch START/STOP button while depressing
the brake pedal within 10 seconds after the chime sounds. The
engine will start.
if the intelligent k ey system warning light in the instrument panel is blinking in green, re\
place the
battery as soon as possible. This warning means that the intelligent k ey battery is almost discharged.
n OTe: if the ignition switch is pushed without depressing the brake pedal, the ignition switch will
change to the A cc position.
OPenin G THe BAck d OOR
To open the back door, unlock and pull the handle.
u nlock the back door using one of the following
operations:

Push the
button on the keyfob or the
intelligent
k ey twice.

Push the back door Request Switch
01 (if so
equipped).

Push the power door lock switch to the unlock position.

insert the key into the driver’s door key cylinder and turn towards th\
e rear of the vehicle twice.
01