navigation NISSAN GT-R 2011 Owners Manual

Black plate (117,1)
Model "R35-N" EDITED: 2009/ 10/ 30
.[Delete Stored Routes]:
Deletes all stored routes.
. [Delete Current Tracking]:
Deletes the current tracked route.
. [Delete Stored Tracking]:
Deletes all stored tracked routes.
. [Delete Avoid Areas]:
Deletes all stored Avoid Areas.
. [Delete Stored Voicetags]:
Deletes all stored Voicetags.
. [Delete Previous Destinations]:
Deletes all or one of the previous
destinations.
. [Delete Previous Start Point]:
Deletes all previous start points.
. [Delete Learned Route]:
Deletes all system learned routes.
6. A confirmation message is displayed. Con-
firm the contents of the message, highlight
[Yes] and push . The stored items
are deleted from the Address Book.Other settings:All stored addresses can also be deleted using
the following procedure.1. Push .
2. Highlight [Address Book] and push TER>.
3. Highlight [Store/Edit] and push .
4. Highlight [Delete All Addressbook Entries] and push .
“SETTING DESTINATION” page 2-23INFO:
This procedure applies only for deleting a stored
home or address. A stored route, tracking or avoid area cannot be deleted using this proce-
dure.
TRANSFERRING INFORMATION TO/
FROM ADDRESS BOOKThe information of the stored home and ad-
dresses can be exported and imported using a
USB memory.1. Insert a USB memory and push
TING> .
INFO:
Refer to the vehicle Owner’s Manual for the
location of the USB connector.
2. Highlight [Navigation] and push .
Navigation
2-91

Black plate (118,1)
Model "R35-N" EDITED: 2009/ 10/ 30
3. Highlight [Address Book] and push TER>.4. Highlight [Transfer Address Book] and push .
5. Highlight [Download Address Book to USB]
or [Download Address Book from USB] and
push .6. Highlight a stored item. The [ON] indicator
illuminates.
7. Highlight [Download] and push .
NOTICE
Do not remove the USB memory until
the system completely imports or ex-
ports the data.
INFO:
If the USB memory already has the data for a
stored address, a confirmation message is
2-92
Navigation

Black plate (119,1)
Model "R35-N" EDITED: 2009/ 11/ 6
displayed. Once overwritten, the original data
cannot be recovered.
The navigation system can be set in details to
meet the preference.BASIC OPERATION1. Push .
2. Highlight [Navigation] and push .
3. Highlight the preferred setting item and push .
Available setting items
. [Address Book]:
Store locations and routes, and edit the
stored items.
“STORING LOCATION” page 2-71
. [Map View]:
Set the display method and the direction of
the map.“CHANGING MAP VIEW” page 2-11 .
[Map Icons]:
Set the map icons to display on the map.
“Displaying map icons” page 2-16
. [Guidance Settings]:
Set the various functions for the route
guidance.“Guidance settings” page 2-61
. [Route Settings]:
Change the routing preferences.“Detailed route settings” page 2-66
. [Traffic Info Settings]:
Set the various functions of the XM Nav-
Traffic®information system.“TRAFFIC INFORMATION SET-
TINGS” page 6-12
. [Weather Info Setting]:
Set the functions of the XM NavWeather
TM
information system.
“Weather information settings” page
6-22
. [Speed Limit Info]:
Display speed limit information.“SPEED LIMIT INDICATION ON MAP”
page 2-94
. [Others]:
Display other setting items.“OTHER NAVIGATION SETTINGS”
page 2-94
Navigation
2-93
NAVIGATION SETTING

Black plate (120,1)
Model "R35-N" EDITED: 2009/ 11/ 6
.[Delete Stored Information]:
Delete stored locations and the home
setting in the Address Book.
“DELETE STORED ITEMS” page 2-98
. [Delete All Previous Destinations]:
Delete all previous destinations.“DELETE STORED ITEMS” page 2-98
. [Delete Previous Starting Point]:
Delete all previous starting points.“DELETE STORED ITEMS” page 2-98
. [Reset All Navigation Settings to Default]:
Reset all of the settings to default.“RESET ALL NAVIGATION SETTINGS
TO DEFAULT” page 2-98
SPEED LIMIT INDICATION ON MAPTurn the [Speed Limit Info] display on or off. The
indicator light illuminates when the speed limit
display function is set to on.1. Highlight [Speed Limit Info] and push .2. Highlight [Speed Limit Indication on Map] to
toggle the function between on and off. The
indicator light illuminates when the speed
limit display function is set to on.
OTHER NAVIGATION SETTINGSBasic Operation1. Push .
2. Highlight [Navigation] and push .
3. Highlight [Others] and push .
4. Highlight the preferred setting item and push .
Available setting items
. [Audio Display on Map]:
Allows the audio information to be displayed
at all times.
“Displaying audio information on map
screen” page 2-95
. [Small Step Zoom by Dial]:
Sets the free zoom function on or off. When
this setting is on, it is possible to adjust the
scale in smaller steps than with normal scale
adjustment.
2-94
Navigation

Black plate (121,1)
Model "R35-N" EDITED: 2009/ 10/ 30
.[Map Scrolling Information]:
Sets the system so that when the map
scrolls the information about the location
aligned at the center of the cross pointer is
displayed.
“Map scrolling information” page 2-18
. [Customize Nearby Places]:
Set the category of frequently visited land-
marks.“Customizing Nearby Places” page 2-
95
. [Keyboard Type]:
Switches the keyboard layout for the char-
acter input screen.“Settings keyboard layout of character
input screen” page 2-96
. [North Up when Zoom Out]:
When this setting is ON, the orientation of
the map is automatically changed to North
Up when the widest map scale is selected.
The orientation is changed to North Up even
when Heading Up is set.
. [Adjust Current Location]:
Corrects the position of the current location.“Adjusting current vehicle location”
page 2-97
Displaying audio information on
map screenThe operating status of audio functions can be
displayed on the map screen.1. Highlight [Others] and push .
2. Highlight [Audio Display on Map] and push . The indicator illuminates when
the item is set.
3. Push

Black plate (122,1)
Model "R35-N" EDITED: 2009/ 10/ 30
3. Highlight the preferred item and push . The main category list is dis-
played.4. Highlight a main category and push TER>. The sub category list is displayed.
Highlight [Category Search] and push TER>. The preferred category can also be
input directly.
5. Highlight a sub category and push TER>. The category setting is modified.
6. Push

Black plate (123,1)
Model "R35-N" EDITED: 2009/ 10/ 30
QWERTY layout
Adjusting current vehicle locationIf the vehicle icon indicating the current vehicle
location is not in the correct position, the
location of the vehicle icon on the map screen
can be adjusted.
INFO:
. Regardless of the map view setting, the map
is displayed in Plan View when adjusting the
position of the vehicle icon.
. When correcting the position of the vehicle
icon, the map is automatically displayed in
the North Up mode. After finishing the
correction, the map restores the current
orientation setting.
. The position and direction of the vehicle icon
may be misaligned depending on the
external conditions and environment.
. If the vehicle icon is misaligned, drive for a while in a location where the GPS signals
can be received. This may correct the
position of the vehicle icon.
“VEHICLE ICON” page 11-4
1. Highlight [Others] and push
.
2. Highlight [Adjust Current Location] and push . The current location map
screen is displayed.3. Adjust the position of the vehicle icon. After adjusting the position of the vehicle icon, push
.
4. Adjust the direction of the vehicle icon.
After adjusting the direction of the vehicle
icon, push .5. A message is displayed, and the adjusted
vehicle location is stored.
Navigation
2-97

Black plate (124,1)
Model "R35-N" EDITED: 2009/ 10/ 30
DELETE STORED ITEMSDelete stored item from setting screen.Basic Operation1. Highlight [Navigation] and push.
2. Highlight the preferred item that you want to delete and push .
Available items
. [Deletes Stored Information]:
Delete the stored location and home.
. [Delete All Previous Destinations]:
Delete all previous destinations.
. [Delete Previous Start Point]:
Delete all previous start point.
RESET ALL NAVIGATION SETTINGS
TO DEFAULTThis restores various settings (display, volume
level, etc.) to the default settings.
INFO:
The memory contents, such as the stored
locations, will not be deleted.
1. Highlight [Navigation] and push .
2. Highlight [Reset All Navigation Settings to Default] and push .
3. A confirmation message is displayed. Con-
firm the contents of the message, highlight
[Yes] and push .
2-98
Navigation

Black plate (134,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Specification chart:Supported mediaCD, CD-R, CD-RW, DVD-ROM, DVD+R, DVD +RW, DVD +R DL, USB2.0
Supported file systems CD, CD-R, CD-RW, DVD-ROM, DVD
+R, DVD +RW, DVD +R DL: ISO9660 LEVEL1, ISO9660 LEVEL2,
Romeo, Joliet
* ISO9660 Level 3 (packet writing) is not supported.
* Files saved using the Live File System component (on a Windows Vista-based computer) are not supported.
UDF Bridge (UDF1.02+ISO9660) , UDF1.5, UDF2.0
* VDF1.5/VDF2.0 (packet writing) is not supported.
USB memory: FAT16, FAT32
Supported
versions*1 MP3
Version
MPEG1 Audio Layer 3
Sampling frequency 8 kHz - 48 kHz
Bit rate 8 kbps - 320 kbps, VBR*4
WMA*2 Version
WMA7, WMA8, WMA9
Sampling frequency 32 kHz - 48 kHz
Bit rate 32 kbps - 192 kbps, VBR*4
AAC Version
MPEG-AAC
Sampling frequency 8 kHz - 96 kHz
Bit rate 16 kbps - 320 kbps, VBR*4
Tag information (Song title and Artist name) ID3 tag VER1.0, VER1.1, VER2.2, VER2.3, VER2.4 (MP3 only)
WMA tag (WMA only)
Folder levels With navigation system:
Folder levels: 8, Folders: 255 (including root folder) , Files: 512 (Max. 255 files for one folder)
Folder levels: 8, Folders and files: 999 (Max. 255 files for one folder)
Text character number limitation With navigation system: 100 characters
Displayable character codes*3 01: ASCII, 02: ISO-8859-1, 03: UNICODE (UTF-16 BOM Big Endian) , 04: UNICODE (UTF-16 Non-BOM Big
Endian) , 05: UNICODE (UTF-8) , 06: UNICODE (Non-UTF-16 BOM Little Endian) , 07: SHIFT-JIS3-8
Audio system

Black plate (19,1)
6 Viewing technical information
Model "R35-N" EDITED: 2009/ 10/ 30
Status screen.................................................... 6-2
Information screen .............................................. 6-2
Basic operation ............................................. 6-2
Viewing information about current vehicle location ...... 6-3
Basic operation ............................................. 6-3
Vehicle information display .................................... 6-4
Fuel economy information ................................. 6-4
Tire pressure information .................................. 6-5
Maintenance information .................................. 6-6
Viewing available traffic information ........................ 6-7
Basic operation ............................................. 6-8
Info on route ................................................. 6-9
Nearby traffic info. .......................................... 6-9 Display urgent traffic information
...................... 6-10
Traffic information on map .............................. 6-10
Traffic information settings .............................. 6-12
Viewing available weather information ................... 6-13
Displaying weather information screen ............... 6-14
Destination weather on suggested route
screen ....................................................... 6-20
Automatically display warnings/watches ............. 6-21
Map update .................................................... 6-23
Viewing navigation system version information ......... 6-24
Basic operation ........................................... 6-24
Viewing GPS current location information .............. 6-24
Basic operation ........................................... 6-24