fuse NISSAN GT-R 2015 R35 Owners Manual
[x] Cancel search | Manufacturer: NISSAN, Model Year: 2015, Model line: GT-R, Model: NISSAN GT-R 2015 R35Pages: 358, PDF Size: 6.94 MB
Page 14 of 358
been tested on a test circuit to ensure the
suspension components “settle” prior to ship-
pin�f. Followin�f this circuit test the odometer
readin�f at the time o�b vehicle shipment is as
listed. Please note a small amount o�b additional
milea�fe may have been added in the subse-
quent onward transportation. In addition your
GT-R has been inspected and tested by the
�bactory test personnel. The titanium mu�b�bler
speci�bications are provided on a label under
the console lid should the mu�b�bler need to be
adjusted. Please do not remove the label �brom
the console lid. See a GT-R certi�bied NISSAN
dealer �bor detailed in�bormation.
I�b a non-�fenuine titanium mu�b�bler is used, the
mu�b�bler may become de�bormed and dama�fe the
underbody due to the hi�fh per�bormance en�fine
reachin�f hi�fh exhaust �fas temperatures
(1,8328F (1,0008C) or more) . The hi�fhest-class
titanium alloy is used �bor �fenuine parts to ensure
the resistance stren�fth and creepin�f character-
istics a�fainst hi�fh exhaust �fas temperature. In
addition, �burther coolin�f e�b�bects are secured by
adoptin�f additional coolin�f �bins and by applyin�f
partial plate thickness reduction. Since �fenuine
titanium mu�b�blers are made o�b titanium alloy, the
sur�bace color will chan�fe dependin�f on the
drivin�f conditions, which is not unusual. Prior to
shippin�f �brom �bactory, all vehicles receivebalance ali�fnin�f �bor en�fine, transmission, and
clutch, as well as quench drivin�f o�b brake pads
and rotors. As a result, the mu�b�bler sur�bace color
may di�b�ber dependin�f on the vehicle.
Never remove the trunk carpet �brom the vehicle
�bor any reason. The carpet insulates the vehicle
interior �brom the heat o�b the mu�b�bler and �brom the
noise o�b the transmission.
Never Allow Oil or Grease to Adhere to the
Titanium Muffler.
I�b the mu�b�bler is heated when oil or �frease adhere
to the mu�b�bler sur�bace, the color o�b this area will
be di�b�berent �brom that o�b the surroundin�f area. To
remove the oil or �frease, check that the sur�bace
temperature o�b the mu�b�bler has cooled, wash the
area with a neutral deter�fent, wipe it with a
brake cleaner-sprayed clean shop cloth and
�fently tap it with a dry shop cloth to dry. Be
care�bul not to allow the brake cleaner to splatter
on rubber parts, bumper, etc.DRY CARBON FIBER PARTS (if so
equipped)
Because o�b the characteristics o�b the material,
the dry carbon �biber parts may turn yellow due to
exposure to ultraviolet rays. The sur�baces o�b dry
carbon �biber parts are coated with a special
ultraviolet protection paint. To maintain the
appearance o�b these parts, it is important to
take proper care o�b them.
NOTICE
.
Do not use compound agents on
clear-coated dry carbon fiber parts
(such as the NISMO model’s bum-
per, side sill protector, rear spoiler,
etc.) .
. Do not use any chemical agents
(wax, coating agent, compound
agent, etc.) on matte-painted dry
carbon fiber parts (such as the rear
diffuser, a rear spoiler that is of
specifications other than NISMO,
etc.) .
. When dry carbon fiber parts become
dirty, prepare a dilute cleaning solu-
tion by mixing one capful of mild
detergent in a bucket of water, and
GT-R OverviewGTR-7
Page 46 of 358
1. Outside mirror control switch (P.�f-28�b
2. Center dial*
�f. Audio system*
4. Heater and air conditioner*
5. Multi function display*
6. Hazard warning flasher switch (P.6-2�b7. Glove box (P.2-58�b
8. Fuse box cover (P.8-24�b
9. Power outlet (P.2-55�b
10. Rear window defroster switch (P.2-50�b
11. Front passenger air bag status light (P.1-41�b
12. CD/DVD slot*1�f. Trunk release power cancel switch (P.�f-21�b
*: Refer to the separate Multi Function Display
Owner’s Manual.
Illustrated table of contents0-9
INSTRUMENT PANEL
Page 48 of 358
1. Fuse/fusible link holder (P.�f-24�b
2. Battery (P.�f-17�b
3. Engine oil filler cap (P.�f-13�b
4. Engine oil dipstick (P.�f-13�b
5. Brake fluid reservoir (P.�f-15�b
6. Air cleaner (P.�f-21�b7. Power steering fluid reservoir (P.�f-14�b
�f. Radiator filler cap (P.�f-10�b
9. Coolant reservoir cap (pressure type�b (P.�f-10�b
10. Coolant reservoir (P.�f-10�b
11. Window washer fluid reservoir (P.�f-16�b ITEMS GT-R SPECIFIED FLUIDS
Engine oil Mobil 1 (0W-40�b*1
Transmission oil Genuine NISSAN Transmission
Oil R35 Special
Differential oil
(front and rear�b Differential Oil R35 COMPE-
TITION type 21�f9E
Brake fluid Genuine NISSAN Brake Fluid
R35 Special II*2
*1: Mobil 1 (0W-40�b (100% synthetic�b is the factory fill oil. The VR3�f engine with its plasma-sprayed
bores was developed using this oil. NISSAN
cannot ensure proper engine operation and
durability if other 0W-40 synthetic oil is used.
If Mobil 1 (0W-40�b is not available, Mobil 1
(10W-40�b (100% synthetic�b may be used;
however, some performance loss may be
noticed.
*2: Genuine NISSAN Brake Fluid R35 Special II is the factory fill brake fluid. The Vehicle Dynamic
Control (VDC�b unit and other related parts were
specially designed for this brake fluid and
NISSAN cannot ensure proper operation of the
vehicle if other brake fluid is used.
Illustrated table of contents0-11
ENGINE COMPARTMENT
Page 101 of 358
2-4Instruments and controls
1. Outside mirror control switc�f (P.3-2�b)
2. Center dial*
3. Audio system*
4. Heater and air conditioner*
5. Multi function display*
6. Hazard warning flas�fer switc�f (P.6-2)7. Glove box (P.2-5�b)
�b. Fuse box cover (P.�b-24)
9. Power outlet (P.2-55)
10. Rear window defroster switc�f (P.2-50)
11. Front passenger air bag status lig�ft (P.1-41)
12. CD/DVD slot*13. Trunk release power cancel switc�f (P.3-21)
*: Refer to t�fe separate Multi Function Display
Owner’s Manual.
INSTRUMENT PANEL
Page 152 of 358
CAUTION
.The outlet and plug may be hot
during or immediately after use.
. Do not use with accessories that
exceed a 12 volt, 120W (10A) power
draw. Do not use double adapters or
more than one electrical accessory.
. This power outlet is not designed
for use with a cigarette lighter unit.
. Before inserting or disconnecting a
plug, be sure the electrical acces-
sory being used is turned OFF.
. When not in use, be sure to close
the cap. Do not allow water to
contact the outlet.
NOTICE
.Use power outlet with the engine
running to avoid discharging the
vehicle battery.
. Avoid using power outlet when the
air conditioner, headlights or rear
window defroster is on. .
Push the plug in as far as it will go.
If good contact is not made, the plug
may overheat or the internal tem-
perature fuse may open.
Next to the steering wheel
Pull out the cap to use the outlet.
Replace the cap after use.
Instruments and controls2-55
POWER OUTLETS
Page 269 of 358
7-4Appearance and care
water-spotted.
. Avoid using tight-napped or rough
cloths, such as washing mitts. Care
must be taken when removing
caked-on dirt or other foreign sub-
stances so the paint surface is not
scratched or damaged.
Rinse the vehicle thoroughly with \flenty of clean
water.
\bnside flanges, seams and folds on the doors,
hatches and hood are \farticularly vulnerable to
the effects of road salt. Therefore, these areas
must be regularly cleaned. Take care that the
drain holes in the lower edge of the door are
o\fen. S\fray water under the body and in the
wheel wells to loosen the dirt and wash away
road salt.
Avoid leaving water s\fots on the \faint surface
by using a dam\f chamois to dry the vehicle.WAXING
Regular waxing \frotects the \faint surface and
hel\fs retain new vehicle a\f\fearance. Polishing
is recommended to remove built-u\f wax residue
and to avoid a weathered a\f\fearance before
rea\f\flying wax.
A GT-R certified N\bSSAN dealer can assist you
in choosing the \fro\fer \froduct.
. Wax your vehicle only after a thorough
washing. Follow the instructions su\f\flied
with the wax.
. Do not use a wax containing any abrasives,
cutting com\founds or cleaners that may
damage the vehicle finish.
Machine com\found or aggressive \folishing on a
base coat/clear coat \faint finish may dull the
finish or leave swirl marks.
WARNING
Do not use wax on the glass, rubber or
plastic parts around the glass or door.
This may prevent the window operation
or cause poor visibility and the wax
cannot be coated uniformly.
NOTICE
. Do not use compound agents on
clear-coated dry carbon fiber parts
(such as the NISMO model’s bum-
per, side sill protector, rear spoiler,
etc.) .
. Do not use any chemical agents
(wax, coating agent, compound
agent, etc.) on matte-painted dry
carbon fiber parts (such as the rear
diffuser, a rear spoiler that is of
specifications other than NISMO,
etc.) .
REMOVING SPOTS
Remove tar and oil s\fots, industrial dust,
insects, and tree sa\f as quickly as \fossible
from the \faint surface to avoid lasting damage
or staining. S\fecial cleaning \froducts are
available at a GT-R certified N\bSSAN dealer or
any automotive accessory stores.
Page 271 of 358
7-6Appearance and care
OUTSIDE DOOR HANDLES
After driving on a road where salt is \fsed in
winter, immediately wash and \blean the o\ftside
door handles that are provided with a spe\bial
\boating. This will keep the bea\ftif\fl finish longer.
TIRE DRESSING
NISSAN does not re\bommend the \fse of tire
dressings. Tire man\ffa\bt\frers apply a \boating to
the tires to help red\f\be dis\boloration of the
r\fbber. If a tire dressing is applied to the tires, it
may rea\bt with the \boating and form a \bom-
po\fnd. This \bompo\fnd may \bome off the tire
while driving and stain the vehi\ble paint.
If yo\f \bhoose to \fse a tire dressing, take the
following pre\ba\ftions:
.Use a water-based tire dressing. The \boat-
ing on the tire dissolves more easily with an
oil-based tire dressing.
. Apply a light \boat of tire dressing to help
prevent it from entering the tire tread/
grooves (where it wo\fld be diffi\b\flt to
remove) .
. Wipe off ex\bess tire dressing \fsing a dry
towel. Make s\fre the tire dressing is
\bompletely removed from the tire tread/
grooves. .
Allow the tire dressing to dry as re\bom-
mended by tire dressing man\ffa\bt\frer.
DRY CARBON FIBER PARTS (if so
equipped)
Be\ba\fse of the \bhara\bteristi\bs of the material,
the dry \barbon fiber parts may t\frn yellow d\fe to
expos\fre to \fltraviolet rays. The s\frfa\bes of dry
\barbon fiber parts are \boated with a spe\bial
\fltraviolet prote\btion paint. To maintain the
appearan\be of these parts, it is important to
take proper \bare of them.
NOTICE
.Do not use compound agents on
clear-coated dry carbon fiber parts
(such as the NISMO model’s bum-
per, side sill protector, rear spoiler,
etc.) .
. Do not use any chemical agents
(wax, coating agent, compound
agent, etc.) on matte-painted dry
carbon fiber parts (such as the rear
diffuser, a rear spoiler that is of
specifications other than NISMO,
etc.) .
. When dry carbon fiber parts become
dirty, prepare a dilute cleaning solu- tion by mixing one capful of mild
detergent in a bucket of water, and
use that mixture to clean the parts.
NOTE:
The surfaces of the dry carbon fiber parts
are lightly coated like a race car so that
you can feel the proper texture of real
carbon, which may feel rough. This is
normal.
Page 276 of 358
8 Maintenance and do-it-yourself
Maintenance requirement..................�l..................�l..................�l. 8-3
Scheduled maintenance ..................�l..................�l............... 8-3
�feneral maintenance ..................�l..................�l..................�l.. 8-3
Where to go �bor service ..................�l..................�l............... 8-3
�feneral maintenance ..................�l..................�l..................�l........ 8-4 Explanation o�b maintenance items ..................�l............... 8-4
Maintenance precautions ..................�l..................�l..................�l. 8-6
Engine compartment check locations ..................�l............... 8-8 Removing the cowl top cover ..................�l..................�l..... 8-9
Engine cooling system ..................�l..................�l..................�l... 8-10
Checking engine coolant level ..................�l..................�l. 8-11
Changing engine coolant ..................�l..................�l.......... 8-12
Engine oil ..................�l..................�l..................�l..................�l........ 8-13
Checking engine oil level ..................�l..................�l.......... 8-13
Changing engine oil and �bilter ..................�l..................�l.. 8-14
Transmission oil ..................�l..................�l..................�l............... 8-14
Power steering �bluid ..................�l..................�l..................�l........ 8-14
Brake �bluid ..................�l..................�l..................�l..................�l....... 8-15
Window washer �bluid ..................�l..................�l..................�l..... 8-16
Battery ..................�l..................�l..................�l..................�l.............. 8-17
Precautions ..................�l..................�l..................�l................. 8-17
Fluid level check ..................�l..................�l..................�l........ 8-18
Jump starting ..................�l..................�l..................�l.............. 8-19 Drive belts ..................�l..................�l..................�l..................�l...... 8-19
Spark plugs ..................�l..................�l..................�l..................�l.... 8-20
Replacing spark plugs ..................�l..................�l............. 8-20
Air cleaner ..................�l..................�l..................�l..................�l...... 8-21
Windshield wiper blades ..................�l..................�l................ 8-22 Cleaning ..................�l..................�l..................�l..................�l.. 8-22
Replacing the wiper blades ..................�l..................�l... 8-22
Brakes ..................�l..................�l..................�l..................�l............. 8-23 Sel�b-adjusting brakes ..................�l..................�l............... 8-23
Brake pad wear warning ..................�l..................�l......... 8-23
High per�bormance brake system ..................�l............. 8-23
Replacing the brake pads ..................�l..................�l....... 8-24
Fuses ..................�l..................�l..................�l..................�l............... 8-24
Engine compartment ..................�l..................�l................ 8-24
Passenger compartment ..................�l..................�l......... 8-25
Intelligent Key battery replacement ..................�l................ 8-27
Lights ..................�l..................�l..................�l..................�l............... 8-29 Headlights ..................�l..................�l..................�l................. 8-30
Exterior and interior lights ..................�l..................�l....... 8-30
Wheels and tires ..................�l..................�l..................�l............ 8-32
Tire pressure ..................�l..................�l..................�l............ 8-32
Tire and loading in�bormation label ..................�l.......... 8-35
Checking the tire pressure ..................�l..................�l..... 8-36
8 Maintenance and do-it-yourself
Maintenance requirement ..................�l..................�l..................�l. 8-3
Scheduled maintenance ..................�l..................�l............... 8-3
�feneral maintenance ..................�l..................�l..................�l.. 8-3
Where to go �bor service ..................�l..................�l............... 8-3
�feneral maintenance ..................�l..................�l..................�l........ 8-4 Explanation o�b maintenance items ..................�l............... 8-4
Maintenance precautions ..................�l..................�l..................�l. 8-6
Engine compartment check locations ..................�l............... 8-8 Removing the cowl top cover ..................�l..................�l..... 8-9
Engine cooling system ..................�l..................�l..................�l... 8-10
Checking engine coolant level ..................�l..................�l. 8-11
Changing engine coolant ..................�l..................�l.......... 8-12
Engine oil ..................�l..................�l..................�l..................�l........ 8-13
Checking engine oil level ..................�l..................�l.......... 8-13
Changing engine oil and �bilter ..................�l..................�l.. 8-14
Transmission oil ..................�l..................�l..................�l............... 8-14
Power steering �bluid ..................�l..................�l..................�l........ 8-14
Brake �bluid ..................�l..................�l..................�l..................�l....... 8-15
Window washer �bluid ..................�l..................�l..................�l..... 8-16
Battery ..................�l..................�l..................�l..................�l.............. 8-17
Precautions ..................�l..................�l..................�l................. 8-17
Fluid level check ..................�l..................�l..................�l........ 8-18
Jump starting ..................�l..................�l..................�l.............. 8-19 Drive belts ..................�l..................�l..................�l..................�l...... 8-19
Spark plugs ..................�l..................�l..................�l..................�l.... 8-20
Replacing spark plugs ..................�l..................�l............. 8-20
Air cleaner ..................�l..................�l..................�l..................�l...... 8-21
Windshield wiper blades ..................�l..................�l................ 8-22 Cleaning ..................�l..................�l..................�l..................�l.. 8-22
Replacing the wiper blades ..................�l..................�l... 8-22
Brakes ..................�l..................�l..................�l..................�l............. 8-23 Sel�b-adjusting brakes ..................�l..................�l............... 8-23
Brake pad wear warning ..................�l..................�l......... 8-23
High per�bormance brake system ..................�l............. 8-23
Replacing the brake pads ..................�l..................�l....... 8-24
Fuses ..................�l..................�l..................�l..................�l............... 8-24
Engine compartment ..................�l..................�l................ 8-24
Passenger compartment ..................�l..................�l......... 8-25
Intelligent Key battery replacement ..................�l................ 8-27
Lights ..................�l..................�l..................�l..................�l............... 8-29 Headlights ..................�l..................�l..................�l................. 8-30
Exterior and interior lights ..................�l..................�l....... 8-30
Wheels and tires ..................�l..................�l..................�l............ 8-32
Tire pressure ..................�l..................�l..................�l............ 8-32
Tire and loading in�bormation label ..................�l.......... 8-35
Checking the tire pressure ..................�l..................�l..... 8-36
Page 283 of 358
8-8Maintenance and do-it-yourself
1. Fuse/fusible link holder
�f. Batter�b
3. Engine oil filler cap
4. Engine oil dipstick
5. Brake fluid reservoir
6. Air cleaner7. Power steering fluid reservoir
8. Radiator filler cap
9. Coolant reservoir cap (pressure t�bpe)
10. Coolant reservoir
11. Window washer fluid reservoir
NOTICE
The coolant reservoir is equipped with a
pressure type cap, and the radiator is
equipped with a non-pressure type cap.
Do not switch the radiator filler cap and
the coolant reservoir cap. Doing so will
cause substandard cooling perfor-
mance and overheating.
ENGINE COMPARTMENT CHECK
LOCATIONS
Page 299 of 358
8-24Maintenance and do-it-yourself
dry road, especially after was�fing t�fe ve�ficle or
driving in rain�b Contact a GT-R certified NISSAN
dealer if t�fe noise and vibration continue�b
Frequent �fard braking may cause scorc�fing of
t�fe brake pads�b T�fis will require t�fe brake pads
to be replaced, even if t�fe wear limit �fas not
been reac�fed�b Have t�fe brake pads and disc
rotors inspected at t�fe regular ve�ficle inspec-
tions�b
For more details, contact a GT-R certified
NISSAN dealer�b
REPLACING THE BRAKE PADS
NISSAN generally recommends to replace all
four sets of brake pads and disc rotors at t�fe
same time to maintain maximum brake perfor-
mance�b
However, replacing only t�fe brake pads may be
allowed in some cases (four w�feels or only front
w�feels depending on t�fe conditions) �b A GT-R
certified tec�fnician must inspect t�fe ve�ficle and
determine t�fat only t�fe brake pads need to be
replaced�b In t�fis case, replacing all brake pads
and disc rotors as a set is not necessary�b
Note t�fat t�fe replacement of brake pads and t�fe
disc rotors as a set on all four w�feels s�fould be
performed w�fen a GT-R certified tec�fnician
determines t�fat t�fis is t�fe correct repair�bIf t�fe inside of t�fe disc rotors are cold during t�fe
winter and t�fe surface becomes �fot due to a
�feavy force being applied repeatedly to t�fe
brakes, cracks may occur near t�fe coolant �fole
on t�fe surface of t�fe disc rotor�b Cracks may also
occur due to a �feavy force being repeatedly
applied to t�fe brakes during �fig�f performance
driving�b In t�fese cases it may be necessary to
replace t�fe disc rotors or brake pads depending
on t�fe condition of t�fe crack�b Contact a GT-R
certified NISSAN dealer for replacement�b
ENGINE COMPARTMENT
CAUTION
Never use a fuse of a higher or lower
amperage rating than that specified on
the fuse box cover. This could damage
the electrical system or cause a fire.
If any electrical equipment does not operate,
c�feck for an open fuse�b
1�b Be sure t�fe ignition switc�f is pus�fed to t�fe OFF or LOCK position and t�fe �feadlig�ft
switc�f is turned to OFF�b
FUSES