brake NISSAN JUKE 2015 F15 / 1.G Owner's Manual
[x] Cancel search | Manufacturer: NISSAN, Model Year: 2015, Model line: JUKE, Model: NISSAN JUKE 2015 F15 / 1.GPages: 383, PDF Size: 8.79 MB
Page 256 of 383
> ( G L W 0 R G H O ) ' @
5-12
Starting anddriving
SSD0860
INTELLIGEN TKEY BATTER YDIS-
CHARGE
GUID-B0D19 56A-5575-42 6F-A28A-6ED 797C76123
If the battery ofthe Intelligent Key isdischarged,
or environmental conditionsinterferewiththe
Intelligent Key operation, starttheengine
according tothe following procedure:
1. Move theshift lever tothe P(Park) position
(for Continuously Variable Transmission
models) orthe shift lever tothe N(Neutral)
position (formanual transmission models).
2. Firmly applythefoot brake.
3. Touch theignition switchwiththeIntelligent
K ey as illustrated. (Achime willsound.) 4.
Push theignition switchwhiledepressing
the brake pedalwithin 10seconds afterthe
chime sounds. Theengine willstart.
After step3is performed, whentheignition
switch ispushed withoutdepressing thebrake
pedal, theignition switchposition willchange to
ACC.
NO TE:
. When theignition switchispushed to
the ACC orON position orthe engine is
started bythe above procedures, the
Intelligent Keysystem warning light
may blink inyellow evenifthe Intelli-
gent Keyisinside thevehicle. Thisis
not amalfunction. To stop thewarning
light from blinking, touchtheignition
switch withtheIntelligent Keyagain.
. Ifthe Intelligent Keysystem warning
light inthe meter isblinking ingreen,
replace thebattery assoon aspossible.
(See ªIntelligent Keybattery replace-
mentº (P.8-23) .)
GUID-99D A8E7B-99CA -40D0-B1AA-E 547E7042524
. Make surethearea around thevehicle is
clear.
. Check fluidlevels suchasengine oil,cool-
ant, brake fluid,andwindow washerfluidas
frequently aspossible, oratleast whenever
you refuel.
. Check thatallwindows andlights areclean.
. Visually inspecttiresfortheir appearance
and condition. Alsocheck tiresforproper
inflation.
. Lock alldoors.
. Position seatandadjust headrestraints.
. Adjust insideandoutside mirrors.
. Fasten seatbelts andaskallpassengers to
do likewise.
. Check theoperation ofwarning lightswhen
the ignition switchisplaced inthe ON
position. (SeeªWarning/indicator lightsand
audible remindersº (P.2-12) .)
BEFORE STARTING THEENGINE
& R Q G L W L R Q
Page 257 of 383
> ( G L W 0 R G H O ) ' @
GUID-74 08FE11-64BC -4759-BC8E-07366732C0C9
1. Apply theparking brake.
2. Move theshift lever tothe P(Park) orN
(Neutral) position.(Pisrecommended.)
The starter isdesigned nottooperate unless
the shift lever isin either ofthe above
positions.
Manual Transmission (MT)models:
Move theshift lever tothe N(Neutral)
position. Depresstheclutch pedalfullyto
the floor.
The starter isdesigned nottooperate unless
the clutch pedalisfully depressed.
The Intelligent Keymust becarried
when operating theignition switch.
3. Push theignition switchtothe ON position.
Depress thebrake pedal(CVTmodels) or
the clutch pedal(MTmodels) andpush the
ignition switchtostart theengine.
T o start theengine immediately ,push and
release theignition switchwhiledepressing
the brake pedal withtheignition switchin
any position.
.
If the engine isvery hard tostart in
extremely coldweather orwhen restart-
ing, depress theaccelerator pedalalittle
(approximately 1/3tothe floor) andwhile
holding, cranktheengine. Release the
accelerator pedalwhentheengine starts.
.
If the engine isvery hard tostart because
it is flooded, depresstheaccelerator
pedal allthe way tothe floor andhold it.
Push theignition switchtothe ON
position tostart cranking theengine.
After 5or 6seconds, stopcranking by
pushing theignition switchtoOFF .After
cranking theengine, releasetheaccel-
erator pedal. Cranktheengine withyour
foot offthe accelerator pedalby
depressing thebrake pedal andpushing
the push-button ignitionswitchtostart
the engine. Ifthe engine starts,butfails
to run, repeat theabove procedure.
CAUTION
Do not operate thestarter formore
than 15seconds atatime. Ifthe engine
does notstart, pushtheignition switch
to OFF andwait 10seconds before
cranking again,otherwise thestarter
could bedamaged.
4. Warm-up
Allow theengine toidle foratleast 30
seconds afterstarting. Donot race the
engine whilewarming itup. Drive at
moderate speedforashort distance first, especially
incold weather. Incold weather,
keep theengine running foraminimum of2-
3 minutes beforeshutting itoff. Starting and
stopping theengine overashort period of
time maymake thevehicle moredifficult to
start.
When racing theengine upto4,000 rpmor
more under noload condition, theengine
will enter thefuel cutmode.
5. To stop theengine, movetheshift lever to
the P(Park) position (CVTmodels) ormove
the shift lever tothe N(Neutral) position(MT
models) ,and push theignition switchtothe
OFF position.
NO TE:
Care should betaken toavoid situations
that canlead topotential batterydischarge
and potential no-startconditions suchas:
1. Installation orextended useofelectro-
nic accessories thatconsume battery
power whentheengine isnot running
(Phone chargers, GPS,DVDplayers,
etc .)
2. Vehicle isnot driven regularly and/or
only driven shortdistances.
In these cases, thebattery mayneed tobe
charged tomaintain batteryhealth.
Starting anddriving
5-13
ST ARTING THEENGINE
& R Q G L W L R Q
Page 258 of 383
> ( G L W 0 R G H O ) ' @
5-14
Starting anddriving
GUID-00 99E665-725B -489E-B596-F5A3F4CD54DB
CONTINUOUS LY VARIABLE TRANS-
MISSION (CVT)
GUID-C69 9DF0B-987D -4AD2-879E-728294 24A200
The Continuously Variable Transmission (CVT)
in your vehicle iselectronically controlledto
produce maximum powerandsmooth operation.
The recommended operatingprocedures forthis
transmission areshown onthe following pages.
Follow theseprocedures formaximum vehicle
performance anddriving enjoyment.
Engine powermaybeautomatically re-
duced toprotect theCVT ifthe engine
speed increases quicklywhendriving on
slippery roadsorwhile being tested on
some dynamometers.
Starting thevehicle
GUID-5D2 73D53-F49E -430A-9675-C A17371F1DFA
1. After starting theengine, fullydepress the
foot brake pedalbefore moving theshift
lever outofthe P(Park) position.
This CVTisdesigned sothat thefoot
brake pedalmustbedepressed before
shifting fromP(Park) toany driving
position whiletheignition switchisin
the ONposition.
The shift lever cannot bemoved outof
the P(Park) position andinto anyof
the other positions ifthe ignition
switch isplaced inthe LOCK ,OFF or
ACC position orifthe key isremoved. 2.
Keep thefoot brake pedaldepressed, push
the shift lever button andmove theshift lever
to adriving position.
3. Release theparking brakeandfoot brake
pedal, andthen gradually startthevehicle in
motion.
WARNING
. Do not depress theaccelerator
pedal whileshifting fromP(Park)
or N(Neutral) toR(Reverse) ,D
(Drive) ,or manual shiftmode (ifso
equipped) .Always depress the
brake pedaluntilshifting iscom-
pleted. Failure todo socould cause
you tolose control andhave an
accident.
. Cold engine idlespeed ishigh, so
use caution whenshifting intoa
forward orreverse gearbefore the
engine haswarmed up.
. Never shifttoP(Park) orR(Re-
verse) whilevehicle ismoving. Fail-
ure todo socould cause youtolose
control andhave anaccident.
CAUTION
. Except inan emergency, donot shift
to the N(Neutral) positionwhile
driving. Coasting withthetransmis-
sion inthe N(Neutral) positionmay
cause serious damage tothe trans-
mission.
. When stopping thevehicle onan
uphill grade, donot hold thevehicle
by depressing theaccelerator pedal.
The foot brake should beused for
this purpose.
. Do not downshift abruptlyonslip-
pery roads. Thismay cause aloss of
control.
DRIVING THEVEHICLE
& R Q G L W L R Q
Page 259 of 383
> ( G L W 0 R G H O ) ' @
SSD1140
T o move theshift lever,
: Push
thebutton
*
A
while depressing the
brake
pedal.
: Push
thebutton
*
A
.
: Just
move theshift lever.
Shifting
GUID-8E3 3D228-CFD 5-4E80-8A5F -A2EC598FE23A
After starting theengine, fullydepress thebrake
pedal, pushtheshift lever button andmove the
shift lever fromtheP(Park) position toany ofthe
desired shiftpositions.
WARNING
Apply theparking brakeifthe shift lever
is in any position whiletheengine is
not running. Failuretodo socould
cause thevehicle tomove unexpectedly
or roll away andresult inserious
personal injuryorproperty damage.
If the ignition switchisplaced inthe OFF or
ACC position forany reason whiletheshift lever
is in any positions otherthantheP(Park) ,the
ignition switchcannot beplaced inthe LOCK
position.
If the ignition switchcannot beplaced inthe
L OCK position, performthefollowing steps:
1. Apply theparking brakewhenthevehicle is
stopped.
2. Place theignition switchinthe ON position
while depressing thefoot brake pedal.
3. Move theshift lever tothe P(Park) position.
4. Place theignition switchinthe OFF position.
CAUTION
T o prevent transmission damage,move
the shift lever tothe P(Park) orR
(Reverse) positiononlywhen thevehi-
cle iscompletely stopped.
P (Park) :
GUID-F 83C168B-173D -4313-B631-F712588C04 63
Use thisposition whenthevehicle isparked or
when starting theengine. Makesurethevehicle
is completely stopped.Thebrake pedalmust
be depressed andtheshift lever button
pushed into move theshift lever fromN
(Neutral) orany drive position toP(Park) .
Apply theparking brake.Whenparking onahill,
apply theparking brakefirst,then move theshift
lever tothe P(Park) position.
R (Reverse) :
GUID-F 83C168B-173D -4313-B631-F712588C04 63
Use thisposition toback up.Make surethe
vehicle iscompletely stoppedbeforeselecting
the R(Reverse) position.Thebrake pedal
must bedepressed andtheshift lever
button pushed into move theshift lever
from P(Park) ,N (Neutral) orany driving
position toR(Reverse) .
N (Neutral) :
GUID-F 83C168B-173D -4313-B631-F712588C04 63
Neither forward norreverse gearisengaged.
Starting anddriving
5-15
& R Q G L W L R Q
Page 262 of 383
> ( G L W 0 R G H O ) ' @
5-18
Starting anddriving
back tothe ONposition. Thevehicle
should returntoits normal operating
condition. Ifitdoes notreturn toits normal
operating condition, haveaNISSAN dealer
check thetransmission andrepair ifne-
cessary.
WARNING
When thehigh fluid temperature pro-
tection modeorfail-safe operation
occurs, vehiclespeedmaybegradually
reduced. Thereduced speedmaybe
lower thanother traffic,which could
increase thechance ofacollision. Be
especially carefulwhendriving. Ifne-
cessary, pulltothe side ofthe road ata
safe place andallow thetransmission
to return tonormal operation, orhave it
repaired if
necessary.
SSD1142
Shift lockrelease
GUID-39E4 740A-3513-44A0-A3 06-744DB1802606
If the battery charge islow ordischarged, the
shift lever maynotbemoved fromtheP(Park)
position evenwiththebrake pedal depressed
and theshift lever button pushed.
T o move theshift lever, perform thefollowing
procedure:
1. Place theignition switchinthe OFF or
L OCK position.
2. Apply theparking brake.
3. Remove theshift lockrelease cover
*
A
using asuitable tool. 4.
Push down theshift lockrelease usinga
suitable tool.
5. Push theshift lever button andmove the
shift lever tothe N(Neutral) positionwhile
holding downtheshift lockrelease.
Place theignition switchinthe ON position. The
vehicle maybemoved tothe desired location.
Replace theremoved shiftlockrelease cover
after theoperation.
If the battery isdischarged completely,the
steering wheelcannot beunlocked. Donot
move thevehicle withthesteering wheellocked.
If the shift lever cannot bemoved outofthe P
(Park) position, haveaNISSAN dealercheckthe
CVT system assoon aspossible.
WARNING
If the shift lever cannot bemoved from
the P(Park) position whiletheengine is
running andthebrake pedalisde-
pressed, thestop lights maynotwork.
Malfunctioning stoplights couldcause
an accident injuringyourself and
others.
& R Q G L W L R Q
Page 263 of 383
> ( G L W 0 R G H O ) ' @
MANUAL TRANSMISSIO N(MT)
GUID-578 CD4B7-85A6 -49CB-AB4F-F226DA21 98CA
WARNING
. Do not downshift abruptlyonslip-
pery roads. Thismay cause aloss of
control.
. Do not over-rev theengine when
shifting toalower gear.Thismay
cause aloss ofcontrol orengine
damage.
. When thehigh fluid temperature
protection modeorfail-safe opera-
tion occurs, vehiclespeedmaybe
gradually reduced.Thereduced
speed maybelower thanother
traffic ,which couldincrease the
chance ofacollision. Beespecially
careful whendriving. Ifnecessary,
pull tothe side ofthe road atasafe
place andallow thetransmission to
return tonormal operation, orhave
it repaired ifnecessary.
CAUTION
. Do not rest your footonthe clutch
pedal whiledriving. Thismay da-
mage theclutch.
. Fully depress theclutch pedalbe-
fore shifting tohelp prevent trans-
mission damage.
. Stop yourvehicle completely before
shifting intoR(Reverse) .
. When thevehicle isstopped fora
period oftime, forexample atastop
light, shifttoN(Neutral) andrelease
the clutch pedalwiththefoot brake
applied.
SSD0552
Shifting
GUID-9FDDD F2D-B4D7-4E6E-B1E 7-9D36A148 D03F
T o change gears,orwhen upshifting ordown-
shifting, fullydepress theclutch pedal, shiftinto
the appropriate gear,thenslowly andsmoothly
release theclutch pedal.
T o ensure smooth gearchanges, besure tofully
depress theclutch pedalbefore operating the
shift lever. Ifthe clutch pedalisnot fully
depressed beforethetransmission isshifted, a
gear noise maybeheard. Transmission damage
could occur.
Start thevehicle in1st gear andshift to2nd,
3rd, 4th,5thand 6thgear insequence accord-
ing tovehicle speed.
Starting anddriving
5-19
& R Q G L W L R Q
Page 269 of 383
> ( G L W 0 R G H O ) ' @
screen.
GUID-31E C2358-F7E 9-4615-836 7-3344BACF 4D60
WARNING
. Be sure theparking brakeisfully
released beforedriving. Failureto
do socan cause brakefailure and
lead toan accident.
. Do not release theparking brake
from outside thevehicle.
. Donot use theshift lever inplace of
the parking brake.Whenparking, be
sure theparking brakeisfully
engaged.
. Donot leave children unattended in
a vehicle. Theycould release the
parking brakeandcause anacci-
dent.
SP A2110
T o apply: Pulltheparking brakeleverup
*
1
.
T o release:
1. Firmly applythefoot brake.
2. While pulling uponthe parking brakelever
slightly ,push thebutton
*
2
and lower the
lever completely
*
3
.
3. Before driving, besure thebrake warning
light goes out.
Starting anddriving
5-25
P ARKING BRAKE
& R Q G L W L R Q
Page 271 of 383
> ( G L W 0 R G H O ) ' @
accelerator pedal.Your vehicle willmaintain the
set speed.
. To pass another vehicle,depressthe
accelerator pedal.Whenyourelease the
pedal, thevehicle willreturn tothe previously
set speed.
. The vehicle maynotmaintain thesetspeed
on winding orhilly roads. Ifthis happens,
drive without thecruise control.
T o cancel thepreset speed, useone ofthe
following methods:
a) PushtheCANCEL switch.
b) Tap the brake pedal.
c) Turn theMAIN switch off.The CRUISE indicator
light willturn off.
. Ifyou depress thebrake pedalwhilepushing
the ACCEL/RES orCOAST/SET switchand
reset atthe cruising speed,thecruise
control willdisengage. Turn theMAIN switch
off once andthen turniton again.
. The cruise control willautomatically cancelif
the vehicle slowsmorethan8MPH (13
km/h) below thesetspeed.
. Ifyou move theshift lever tothe N(Neutral)
position (Continuously Variable Transmis-
sion models) ordepressing theclutch pedal
(Manual Transmission models),the cruise
control willbecanceled. T
o reset atafaster cruising speed,useone
of the following methods:
. Depress theaccelerator pedal.Whenthe
vehicle attainsthedesired speed,pushand
release theCOAST/SET switch.
. Push andhold theACCEL/RES switch.
When thevehicle attainsthedesired speed,
release theswitch.
. Push, thenquickly release theACCEL/RES
switch. Eachtimeyoudothis, thesetspeed
will increase byabout 1MPH (1.6km/h) .
T o reset ataslower cruising speed,useone
of the following methods:
. Lightly tapthebrake pedal. Whenthe
vehicle attainsthedesired speed,pushthe
COAST/SET switchandrelease it.
. Push andhold theCOAST/SET switch.
Release theswitch whenthevehicle slows
down tothe desired speed.
. Push, thenquickly release theCOAST/SET
switch. Eachtimeyoudothis, thesetspeed
will decrease byabout 1MPH (1.6km/h) .
T o resume thepreset speed, pushand
release theACCEL/RES switch.Thevehicle
will resume thelast setcruising speedwhenthe
vehicle speedisover 25MPH (40km/h) .
GUID-EC2F D794-8914-4CC0-A38E-2BDC09 CE9FF5
CAUTION
During thefirst 1,200 miles (2,000 km),
follow theserecommendations toob-
tain maximum engineperformance and
ensure thefuture reliability andecono-
my ofyour newvehicle. Failureto
follow theserecommendations may
result inshortened enginelifeand
reduced engineperformance.
. Avoid driving forlong periods atconstant
speed, eitherfastorslow .Do not run the
engine over4,000 rpm.
. Donot accelerate atfull throttle inany gear.
. Avoid quickstarts.
. Avoid hardbraking asmuch aspossible.
Starting anddriving
5-27
BREAK-IN SCHEDULE
& R Q G L W L R Q
Page 272 of 383
> ( G L W 0 R G H O ) ' @
5-28
Starting anddriving
GUID-7C03 A534-EF0E- 40B7-84F0-1 3B8CB4EE473
Follow theseeasy-to-use FuelEfficient Driving
Tips tohelp youachieve themost fueleconomy
from yourvehicle.
1. Use smooth accelerator andbrake pedal
application.
.
Avoid rapidstarts andstops.
.
Use smooth, gentleaccelerator and
brake application wheneverpossible.
.
Maintain constant speedwhilecommut-
ing and coast whenever possible.
2. Maintain constant speed.
.
Look ahead totry and anticipate and
minimize stops.
.
Synchronizing yourspeed withtraffic
lights allows youtoreduce yournumber
of stops.
.
Maintaining asteady speedcanminimize
red light stops andimprove fueleffi-
ciency .
3. Use airconditioning (A/C)athigher vehicle
speeds.
.
Below 40MPH (64km/h) ,it is more
efficient toopen windows tocool the
vehicle duetoreduced engineload.
.
Above 40MPH (64km/h) ,it is more
efficient touse A/C tocool thevehicle
due toincreased aerodynamic drag.
.
Recirculating thecool airinthe cabin
when theA/C ison reduces coolingload.
4. Drive ateconomical speedsanddistances.
.
Observing thespeed limitandnotex-
ceeding 60MPH (97km/h) (where
legally allowed) canimprove fueleffi-
ciency duetoreduced aerodynamic
drag.
.
Maintaining asafe following distance
behind othervehicles reduces unneces-
sary braking.
.
Safely monitoring traffictoanticipate
changes inspeed permits reduced brak-
ing and smooth acceleration changes.
.
Select agear range suitable toroad
conditions.
5. Use cruise control.
.
Using cruise control duringhighway
driving helpsmaintain asteady speed.
.
Cruise control isparticularly effectivein
providing fuelsavings whendriving on
flat terrains.
6. Plan forthe shortest route.
.
Utilize amap ornavigation systemto
determine thebest route tosave time.
7. Avoid idling.
.
Shutting offyour engine whensafefor
stops exceeding 30-60seconds saves fuel
and reduces emissions.
8. Buy anautomated passfortoll roads.
.
Automated passespermitdrivers touse
special lanestomaintain cruisingspeed
through thetolland avoid stopping and
starting.
9. Winter warmup.
.
Limit idling timetominimize impacttofuel
economy .
.
V ehicles typically neednomore than30
seconds ofidling atstart-up toeffectively
circulate theengine oilbefore driving.
.
Y our vehicle willreach itsideal operating
temperature morequickly whiledriving
versus idling.
10. Keeping yourvehicle cool.
.
Park yourvehicle inacovered parking
area orinthe shade whenever possible.
.
When entering ahot vehicle, opening the
windows willhelp toreduce theinside
temperature faster,resulting inreduced
demand onyour A/Csystem.
FUEL EFFICIENT DRIVINGTIPS
& R Q G L W L R Q
Page 275 of 383
> ( G L W 0 R G H O ) ' @
A WD shift tips
GUID-C35 72DD7-028 5-47BA-B5AE -F412F28BC6E1
. Ifthe AWD mode switch isoperated while
making aturn, accelerating ordecelerating,
or ifthe ignition switchisturned offwhile in
the AWD-V orAWD mode, youmay feela
jolt. This isnormal.
. The oiltemperature ofpower trainparts will
increase ifthe vehicle iscontinuously
operated underconditions wherethediffer-
ence inrotation between thefront andrear
wheels islarge (wheel slip),such aswhen
driving thevehicle onrough roadsthrough
sand ormud orwhen freeing astuck vehicle.
In these cases, theAWD warning lightblinks
rapidly andtheAWD mode changes tothe
2WD mode toprotect thepower trainparts.
If you stop driving withtheengine idlingand
wait until thewarning lightstops blinking,
the AWD returns tothe AWD-V orAWD
mode.
. Brake distance inthe AWD mode isthe
same as2WD.
CAUTION
. Do not start theengine withthe
AWD mode switch inany mode in
the following cases: Ð
when thevehicle isplaced ona
free-roller orjacking upthe
vehicle withthefront tires
raised andtherear tires onthe
ground.
Ð when towing thevehicle withthe
rear tires raised fromthe
ground.
. Operate theAWD mode switch only
when driving straight. Donot oper-
ate the AWD mode switch when
making aturn orbacking up.
. Do not operate theAWD mode
switch withthefront wheel spin-
ning.
. Engine idlingspeed ishigh while
warming upthe engine. Beespe-
cially careful whenstarting ordriv-
ing onslippery surfaces withthe
AWD mode switch setinthe AWD-V
or AWD mode.
SSD0336-D
A WD WARNING LIGHT
GUID-00 AD0D7B-4E5 0-437F-8A9D-C89C8757 711F
The AWD warning lightlocated inthe instrument
panel illuminates whentheignition switchis
placed inthe ON position. Itturns offsoon after
the engine isstarted.
If any malfunction occursinthe AWD system
while theengine isrunning, orwhile driving, the
Starting anddriving
5-31
& R Q G L W L R Q