lock NISSAN MAXIMA 2007 A34 / 6.G Quick Reference Guide

TIRE PRESSURE MONITORING SYSTEM (TPMS)
This system monitors tire pressure. Please remember, this system
does not detect a sudden drop in tire pressure (for example, a
blowout while driving). It also does not monitor the air pressure in
the spare tire.
Tire pressure is affected by temperature. Low outside temperature causes lower tire
pressure. This may cause the low tire pressure warning light to illuminate.
If the low tire pressure warning light illuminates, check the tire pressure in all four tires.
To turn the low tire pressure warning light off, adjust the low tire pressure to the
recommended COLD tire pressure shown on the Tire and Loading Information label
located in the driver’s door opening.
If TPMS is not functioning properly, the low tire pressure warning light will flash for
approximately 60 seconds when the key is turned on. After 60 seconds, the light will
remain on. Have the system checked by a NISSAN dealer.
FRONT-PASSENGER AIRBAG STATUS LIGHT
This vehicle is equipped with the Nissan Advanced
Air Bag system. Under some conditions, depending
on the type of occupant or object detected in the
front passenger seat by the occupant classification
sensor, the front-passenger air bag is designed to automatically turn OFF. When the
front-passenger air bag is OFF, the front-passenger air bag status light will illuminate*.
For example:
 When the system detects that the front-passenger’s seat is occupied by a small adult,
child or child restraint as outlined in the Owner’s Manual, the will illuminate to
indicate that the front-passenger air bag is OFF and will not inflate in a crash.
 When the front-passenger’s seat is occupied and the passenger meets the conditions
outlined in the Owner’s Manual, the will not illuminate to indicate that the front-
passenger air bag is operational.
*When the system detects that the front-passenger’s seat is unoccupied, the
passenger air bag status light will not illuminate even though the front-passenger
air bag is OFF.
Refer to the Owner’s Manual for detailed information regarding the Nissan Advanced Air
Bag System.
CHILD SAFETY REAR DOOR LOCK
Child safety locks help prevent the rear doors
from being opened accidentally, especially when
small children are in the vehicle. The child safety
lock levers are located on the edge of the rear
doors. When the lever is in the LOCK position,
the door can be opened only from the outside.

AUTOMATIC DRIVER POSITIONER
(if so equipped)
The automatic driver positioner system has
two features:
 Memory storage function.
 Entry/exit function.
MEMORY STORAGE FUNCTION
Two positions for the driver’s seat, steering
column, and outside mirrors can be stored
in the automatic driver positioner memory.
Follow these procedures to set driver preferences.
SET THE DESIRED POSITIONING
1. Set the shift selector lever to the P (Park) position.
2. Turn the ignition on and adjust the driver’s seat, steering column, and outside mirrors
to the desired positions.
3. Press the
SET (memory) button and within 5 seconds press the position button (1 or
2) for at least 1 second until the indicator light illuminates. The position is now stored
in memory.
LINK TO KEYFOB
 Within 5 seconds of setting the memory position (indicator light is on and ignition is
on), press the
lpd0151
button on the remote.
 A keyfob can be linked to each memory button.
 If memory positioning is reset to a new location, the keyfob automatically re-links.
RECALLING A MEMORY SETTING FROM THE MEMORY PAD
 With the shift selector lever in the P (Park) position, press the position button (1 or 2)
for at least 1 second.
FROM THE KEYFOB
 If properly linked, operation of the
lpd0151
button will automatically return the driver’s seat,
steering column and outside mirrors to the memorized position.
ENTRY/EXIT FUNCTION
The driver’s seat and steering column automatically move to allow the driver to get
into and out of the driver’s seat more easily. The driver’s seat slides backward and the
steering column moves up when:
 The driver’s door is opened, the ignition switch is in the LOCK position and the shift
selector lever is in the P (Park) position.
The driver’s seat and steering column return to the previous position when:
 The driver’s door is closed and the ignition switch is pushed.

FRONT SEAT ADJUSTMENTS
With manual seats (passenger’s seat if so equipped):
F ORWARD AND BACKWARD
 Pull up on the lever under the front of the seat and slide forward or backward. Release
the lever to lock the seat in position.
R ECLINING
 Lift the lever on the side of the seat to adjust your seatback forward or backward;
release the lever when you have found a comfortable angle and the seat belt fits
properly.
W ITH POWER SEATS
(driver’s seat, if so equipped for passenger’s seat):
F ORWARD AND BACKWARD
 Move the control 01 forward or backward to
adjust the seat cushion forward or backward.
 Pull up on the control 01 to raise the
driver’s seat cushion; press down to lower
the cushion.
R ECLINING

 Push the switch 02 forward to move the seatback
forward; push it back to move the seatback backward.
L UMBAR SUPPORT
(driver’s seat, manual or power, if so equipped):
 Your driver’s seat has a lumbar support; adjust it by moving the manual lever up or
down. Or, if equipped with power lumbar, adjust it by pushing the switch 03 forward
or backward.
02
03
01
FOLDING DOWN THE REAR SEATS
(5 passenger model only)
FROM INSIDE THE VEHICLE
 Press the release button 01 to fold down the
center/passenger’s side rear seat.
 Reach through the opening and pull on the
strap 02 located behind the seat to fold
down the driver’s side rear seat.
F ROM THE TRUNK
 Pull the strap 03 located behind the seat to
fold down the center/passenger’s side rear
seat.
 Pull on the strap 04 located behind the seat
to fold down the driver’s side rear seat.
0304
01
02

MAINTENANCE ITEMS
You can set the engine oil and the tire rotation interval. To display the setting of the
maintenance interval, select the ENGINE OIL or TIRE ROTATION key using the
joystick and press the ENTER button. To set the maintenance interval, select the
M AINTENANCE SCHEDULE
key using the joystick and push the joystick to the right or
left. To reset the maintenance interval, select the RESET key using the joystick and press
the ENTER button.
DISPLAY SCREEN SETTINGS
The SETTING screen will appear when the SETTING button is pressed. Select the
DISPLAY key with the joystick and press the ENTER button to choose from various
display screen options. The DISPLAY key will allow you to personalize the information
shown on the display screen, such as climate control or audio system display.
CLOCK SET/ADJUSTMENT
The clock on the display screen can be adjusted using the joystick by the following
procedure:
 Press the SETTING button, then select SYSTEM SETTINGS from the menu on the
display screen.
 Next select CLOCK to enter the CLOCK SETTINGS mode.
 Then select the HOURS or MINUTES key and hold the joystick left or right to adjust
the time. After the desired time is shown on the display screen, press the BACK
button to store.
Refer to your Owner’s Manual and Navigation System Owner’s Manual for additional
information on your navigation system.
I NTELLIGENT KEY SYSTEM
The Intelligent Key system allows you to lock or unlock your
vehicle, open your trunk and start the engine.
NOTE
: It is important to make sure the Intelligent Key is
with you (that is, in your pocket or purse).
 The operating range of the door and trunk lock/unlock
function is approximately 31 in (0.8 m).
 Locking the vehicle - Push any door handle Request
Switch 01 once.
 Unlocking the vehicle - Push any door handle Request
Switch 01 once. The corresponding door will unlock.
Push the door handle Request Switch 01 again within
1 minute; all other doors will unlock.
STARTING THE ENGINE
 Push the ignition knob in.
 Confirm the Intelligent Key warning light is illuminated
green.
 Turn the ignition knob to start the engine.
01

XTRONIC CONTINUOUSLY VARIABLE
TRANSMISSION (CVT) ™
 The Xtronic CVT™ does not produce a gear change
sensation like traditional automatic transmissions.
 The transmission in your vehicle requires a special fluid
available only at your NISSAN dealer. No other fluid will
meet the exact requirements of the new Xtronic CVT™.
MANUAL SHIFT MODE
 When the shift selector lever is shifted from D (Drive) to
the manual shift gate, the transmission enters the manual shift mode.
 In the manual shift mode, shift range is displayed on the position indicator in the
meter.
 When shifting up, move the shift selector lever to the + (up) side. (Shifts to higher
range.)
 When shifting down, move the shift selector lever to the - (down) side. (Shifts to
lower range.)
 In manual shift mode, the transmission automatically shifts down to M1 (first) before
the vehicle comes to a stop. When accelerating again, it is necessary to shift to the
desired range.
 When canceling the manual shift mode, return the shift selector lever to the D (Drive)
position. The transmission returns to the normal driving mode.
TURNING ENGINE OFF
 Shift transmission into P (Park).
 Turn ignition knob to LOCK position.
 An audible warning chime will sound when exiting the vehicle if the ignition knob is
not completely turned to the OFF position.
OPENING THE TRUNK
 To open the trunk release using the request switch,
your intelligent key must be with you.
 Push the request/release switch 02 under the trunk handle.
 Pull up and out on the handle to open the trunk.
02
HEADLIGHT AND TURN SIGNAL CONTROL
HEADLIGHT SWITCH
 Turn the headlight switch to the position to
turn on the front parking, tail, license plate and
instrument panel lights.
 Turn the headlight switch to the position to turn on the headlights. All other lights
remain on.

TRUNK LID OPENER
The trunk lid opener lever is located on the driver’s door.
 To open the trunk lid, pull the opener lever out.
 To close the trunk lid, lower and push the trunk lid
down securely.
FUEL-FILLER DOOR RELEASE
The fuel-filler door release is located on the driver’s door.
 To open the fuel-filler door, push the release.
 To lock, close the fuel-filler door securely.
QR7E-0A34U1 Printing: February 2007 (07)
Nissan, the Nissan Brand Symbol, “SHIFT_” tagline, Z and Nissan model names are Nissan trademarks. ©2007 Nissan North America, Inc.
Sh ift_
AIR RECIRCULATION BUTTON
 Press the air recirculation button to recirculate air inside the vehicle.
 Press the air recirculation button again to turn air recirculation off.
 The air recirculation mode cannot be selected if the air flow mode is selected.
10
This easy-to-use Quick Reference Guide is intended to help you more fully appreciate
some of the unique features and functions of your new vehicle. However, it is not intended
to replace your Owner’s Manual. The Owner’s Manual contains more detailed information
to help you better understand the important safety warnings, features, operation, and
maintenance of your vehicle.