change wheel NISSAN MURANO 2016 2.G 08IT Navigation Manual

Black plate (145,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
: Information
: Road work
: Slippery road
: Weather
: Incident
*4Traffic indicator:
Displays the reception condition of traffic
information transmitted from the provi-
der.
Green: Reception condition is good.
Gray: Reception condition is not good.
No mark: Subscription to NavTraffic
service is not detected.
Traffic information display and scale
levels
GUID-B918E77A-07C7-4047-B349-ED8C636EAB44
2D map and Birdview Map
5 miles 10 km
2 miles 4 km
1 mile 2 km
1/2 mile 1 km
1/4 mile 500 m
1/8 mile 200 m
1/16 mile 100 m
1/32 mile 50 m 2D map and Birdview Map
1/64 mile 25 m
Checking detailed information for traffic
information icons on the map
GUID-5416B9B3-3112-4538-85DE-DE6BFC9FDD6E
NIN00071.Place the cross pointer over the traffic
information icon. The general description of
the icon is displayed.
2. Push or touch [Detail]. The
screen for showing the detailed information
for the traffic information icon is displayed.
NIN0009
3. The map screen centered around the
selected event is displayed. On the left
screen, the detailed information about the
event is displayed. You can scroll the
message by using the multi-function con-
troller or the steering wheel.
4. Push

Black plate (179,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
GIVING VOICE COMMANDSGUID-D46E52BA-684D-4DAB-B605-1A96C8D32A151. Pushlocated on the steering
wheel switch.
NVR00062. A list of commands appears on the screen, and the system provides the voice menu
prompt “Would you like to access Phone,
Navigation, Information, Audio or Help?”.
3. After the tone sounds and the icon on the screen changes from [
] to [], speak a
command.
4. Continue to follow the voice menu prompts and speak after the tone sounds until the
preferred operation is completed.
Operating tipsGUID-4DC2C75C-9D70-45C4-B334-1290C6FC2DBB.Speak a command after the tone.
. Commands that are available are always
shown on the display and spoken through
voice menu prompts. Commands other than
those that are displayed are not accepted. Follow the prompts given by the system.
. If the command is not accepted, the system
announces, “Please say again”. Repeat the
command in a clear voice.
. Push once to return to the
previous screen.
. To cancel the command, push and hold
>. The message, “Voice can-
celed” will be announced.
. Push >to stop the voice prompt
and give the command at once. Remember
to wait for the tone before speaking.
. To adjust the volume of the system feed-
back, push the volume control buttons <+>
or <−> on the steering wheel switch or use
the audio system volume control knob while
the system is making an announcement.
How to speak numbersGUID-01530F6C-D312-4B81-9BB4-B74F714C9EE7NISSAN Voice Recognition requires a certain
way to speak numbers when giving voice
commands. Refer to the following examples.
General rule:
GUID-C7C06D28-6C87-4C20-A441-213FED35BE0EOnly single digits 0 (zero) to 9 can be used. (For
example, if speaking 500, “five zero zero” can be
used, but “five hundred” cannot. Examples:
GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E1-800-662-6200
“One eight zero zero six six two six two zero
zero”
Improving Recognition of Phone numbers:
Recognition of phone numbers can be improved
by saying the phone number in 3 groups of
numbers. For example, to call 800-662-6200,
say “Eight Zero Zero” first, and the system will
then ask to speak the next three digits. Then, say
“Six Six Two”. After recognition, the system will
then ask to speak the last 4 digits. Say, “Six Two
Zero Zero”. Using this method of phone digit
entry can improve recognition performance.
INFO:
For best recognition, speak “zero” for the
number “0” and “oh” for the letter “o”.
Voice recognition9-5

Black plate (182,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
9-8Voice recognition
INFO:
Refer to the vehicle Owner’s Manual for the
operations related to phone, information and
audio.
VOICE COMMAND EXAMPLESGUID-36141030-F0F1-4EAE-8988-C31ED0954808To use the voice recognition function, speaking
one command is sometimes sufficient, but at
other times it is necessary to speak two or more
commands. As examples, some additional basic
operations that can be performed by voice
commands are described here.
Example 1: Placing a call to the phone
number 800-662-6200
GUID-4E079BFC-1E8F-4C3B-B34B-7541D294319A1. Push located on the steering
wheel switch.
NGT00702. The system announces, “Would you like to
access Phone, Navigation, Information,
Audio or Help?”. 3. Speak “Phone”.
NGT00794. Speak “Dial Number”.
NGT00805. Speak “800”.
NGT0081
6. The system announces, “Please say next
three digits or dial, or say change number”.
Speak “662”.
NGT00827. The system announces, “Please say last fourdigits or say change number”. Speak
“6200”.
NGT00838. The system announces, “Dial or ChangeNumber?”. Speak “Dial”.

Black plate (183,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
NGT00849. The system makes a call to 800-662-6200.
INFO:
. Speaking “800-662-6200” (10 continuous
digits) or “662-6200” (7 continuous digits)
is acceptable, if the area code is not
necessary. However the 3-3-4 digit group-
ing is recommended for improved recogni-
tion.
“How to speak numbers” (page 9-20)
. The NISSAN voice recognition system is not
limited to recognizing phone numbers of
only 7 or 10 digits. To dial a number in a
format other than the 3-3-4 digit grouping,
use the “International Call” command.
. If “Change Number” is spoken during phone
number entry, the system will automatically
request that the number be repeated using
the 3-3-4 format. In this case please say the
area code first and then follow the prompts. .
Do not add a “1” in front of the area code
when speaking phone numbers.
. If the system does not recognize a voice
command, please try repeating the com-
mand using a natural voice. Speaking too
slowly or too loudly may further decrease
recognition performance.
Example 2: Placing an international call
to the phone number 011-81-111-222-
3333
GUID-92DB0F19-658E-4721-832B-070BE6F8526A1. Push located on the steering
wheel switch.
NGT00702. The system announces, “Would you like to access Phone, Navigation, Information,
Audio or Help?”.
3. Speak “Phone”.
NGT00794. Speak “International Call”.
NGT00875. Speak “01181111222333”.
NGT0088
Voice recognition9-9

Black plate (184,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
9-10Voice recognition
6. Speak “Dial”.
NGT00897. The system makes a call to 011-81-111-222-3333.
INFO:
Any digit input format is available in the
International Number input process.
Example 3: Setting a destination by a
street address
GUID-2FCA3F04-E079-4E83-96FA-35A7661235A51. Push located on the steering
wheel switch.
NGT0070
2. The system announces, “Would you like to access Phone, Navigation, Information,
Audio or Help?”.
3. Speak “Navigation”.
JNB0277X4. Speak “Address”.
INFO:
Press or touch [Help] to display
the user guide screen.
NGT00725. Speak the name of the state, “California”.
NGT00736. Speak the name of the city, “Gardena”.
NGT00937. Voice feedback will be provided when the command is accepted, and the list of city
names is displayed.
8. After the tone sounds and the icon on the screen changes again, speak “One”.

Black plate (194,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
9-20Voice recognition
3. After the tone sounds and the icon on thescreen changes from [
] to [], speak a
command.
Operating tipsGUID-31F5BA7F-5D55-485A-834C-F33DAF430EAA. If the command is not recognized, the
system announces, “Please say again”.
Repeat the command in a clear voice.
. Push once to return to the
previous screen.
. To cancel the command, push and hold
>. The message, “Voice can-
celed” will be announced.
. Push >to stop the voice prompt
and give the command at once. Remember
to wait for the tone before speaking.
. To adjust the volume of the system feed-
back, push the volume control buttons [+] or
[−] on the steering wheel switch or use the
audio system volume control knob while the
system is making an announcement.
How to speak numbersGUID-8C5F06B9-97E1-4F59-A1B0-16B74F93E20DNISSAN Voice Recognition requires a certain
way to speak numbers when giving voice
commands. Refer to the following examples. General rule:
GUID-C7C06D28-6C87-4C20-A441-213FED35BE0EOnly single digits 0 (zero) to 9 can be used. For
example, to say 500, “five zero zero” can be
used, but “five hundred” cannot.
Examples:
GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E1-800-662-6200
“One eight zero zero six six two six two zero
zero”
Improving Recognition of Phone numbers:
Recognition of phone numbers can be improved
by saying the phone number in 3 groups of
numbers. For example, to call 800-662-6200,
speak “Eight Zero Zero” first, and the system will
then ask to speak the next three digits. Then, say
“Six Six Two”. After recognition, the system will
then ask to speak the last 4 digits. Say, “Six Two
Zero Zero”. Using this method of phone digit
entry can improve recognition performance.
INFO:
For best recognition, speak “zero” for the
number “0” and “oh” for the letter “o”.
SYSTEM FEEDBACK ANNOUNCE-
MENT MODES
GUID-4A2B4FD5-7D3F-4AD9-B6B6-0C3C7664F69E
NVR0033It is possible to select two modes, long or short,
for the announcement by the system.
How to setGUID-1FFD0B5F-0D6B-446A-9DDC-2CF5489D83661. Push .
2. Highlight [Others] and push .
3. Highlight [Voice Recognition] and push
.
NVR0034

Black plate (197,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
3.Highlight [Voice Recognition] and push
.
NVR00364. Highlight [Speaker Adaptation] and push
.
NVR00375.Highlight a user to edit, and push
.
NVR00446. Highlight [Setting] and push .
NVR00457.Highlight an item to edit, and push
.
Setting items
.[Edit User Name]:
Edit the user name.
.[Delete Voice Data]:Reset the user voice that the voice
recognition system has learned.
.[Continuous Learning]:Have the system learn the voice com-
mands of the user in succession, without
selecting commands one by one.
VOICE COMMAND EXAMPLESGUID-9D05BF03-143B-4815-9BE8-4F9F591054EBTo use the voice recognition function, speaking
one command is sometimes sufficient, but at
other times it is necessary to speak two or more
commands. As examples, some additional basic
operations by voice commands are described
here.
Example 1: Switching the map to 2D
(Plan View) mode
GUID-0A511158-0238-4A62-B8E7-2E76EC470A94
NVR00461. Push located on the steering
wheel switch.
2. The system announces, “Please say a
command”.
3. After the tone sounds and the icon on the screen changes from [
] to [], speak
Voice recognition9-23

Black plate (198,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
9-24Voice recognition
“Plan View Map”.
NVR00474. Voice feedback will be provided when thecommand is accepted, and the map is
displayed in 2D (Plan View) .
Example 2: Setting a destination using
places list
GUID-90CD4F21-5511-42E9-B2AD-34FB8FD05894
NVR00461. Push located on the steering
wheel switch.
2. The system announces, “Please say a
command”. 3. After the tone sounds and the icon on the
screen changes from [
] to [], speak
“Places”.
NVR00504. If a route is already set, choose “Near
Current Location”, “Along Route” or “Near
Destination”.
5. After the tone sounds and the icon on the screen changes again, speak “Along Route”.
NVR00436. Voice feedback will be provided when the
command is accepted, and the list of places
of interest categories appears. 7. After the tone sounds and the icon on the
screen changes again, speak “Two”.
NVR00518. Voice feedback will be provided when thecommand is accepted, and the list of places
of interest in the category specified in the
previous step appears.
9. After the tone sounds and the icon on the screen changes again, speak “One”.
NVR005210. Voice feedback will be provided when the
command is accepted, and the system
starts calculating a route to the selected
facility.

Black plate (199,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
Example 3: Setting a destination by a
street address
GUID-529B59D9-C16C-492C-9D37-2CB3E28E472D
NVR00061. Pushlocated on the steering
wheel switch.
2. The system announces, “Please say a
command”.
JNB0277X3. Speak “Address”.
NVR00554. Speak the name of the state, “California”.
NVR00565. Speak the name of the city, “Gardena”.
NVR0057
6.Speak the name of the street, “South
Figueroa street”.
INFO:
Speak the street name precisely including
boulevard, way, north, south, etc. In Alter-
nate Command Mode, the system does not
recognize abbreviated names when they are
spoken. In this case, the system does not
accept “Figueroa street” or “Figueroa”.
NVR00587. Voice feedback will be provided when the command is accepted, and the list of street
names appears.
8. After the tone sounds and the icon on the screen changes again, speak “One”.
Voice recognition9-25