NISSAN PATHFINDER 2006 R51 / 3.G Navigation Manual

NAV2741
3. A confirmation message is displayed. High-light [Yes] and push .
INFO:
If a route is cancelled, [Cancel Route Guidance]
changes to [Resume Route Guidance].
Highlight [Resume Route Guidance] and push
to reactivate the cancelled route.
This is available only until a new route is set.
NAI0412
Delete the route using (only
for 350Z)1. Push .
NAV3024
2. A confirmation message is displayed. High-
light [Yes] and push .
Getting started
2-35

TURNING VOICE GUIDANCE ON/OFFYou can activate or deactivate voice guidance
and adjust the volume.
NAI0413
For Armada, Maxima, Murano, Pathfinder,
Quest, Titan1. Push .
NAV3052
2. Highlight [Guidance Voice] and push
. The indicator illuminates if voice
guidance is activated.
SETTING THE VOICE GUIDANCE2-36
Getting started

NAI0411
For 350Z1. Push .
NAV3047
2. Highlight [Guidance Settings] and push
.
NAV2743
3. Highlight [Guidance Voice] and push
. The indicator illuminates if voice
guidance is activated.
Getting started
2-37

NAV3026
INFO:
You can also activate or deactivate voice
guidance using the following procedure.
1) Push .
2) Highlight [Volume and Beeps] and push .
3) Highlight [Guidance Voice] and push .
ADJUSTING VOICE GUIDANCE VO-
LUMEYou can adjust the volume of voice guidance.
NAI0413
For Armada, Maxima, Murano, Pathfinder,
Quest, Titan1. Push .
2-38
Getting started

NAV3053
2. Highlight [Guidance Volume] and push .
NAV3054
3. Adjust the voice guidance volume using the
joystick.
NAI0413
For 350Z1. Push .
Getting started
2-39

NAV2742
2. Highlight [Volume and Beeps] and push .
NAV2744
3. Highlight [Guidance Volume] and push
.
NAV2745
4. Adjust the voice guidance volume using the
joystick.
2-40
Getting started

3 Map settingsMap types........................................................ 3-2
Plan view ..................................................... 3-2
Birdview
TM.................................................... 3-3
Switching the map view ....................................... 3-4
Available views .............................................. 3-5
Moving a map ................................................... 3-7
Plan view ..................................................... 3-7
BirdviewTM.................................................... 3-8
Returning to the current vehicle location .............. 3-9
Map scrolling information ............................... 3-10 Changing the scale of a map
.............................. 3-12
Map scale .................................................. 3-13
Other settings for the map screen ........................ 3-15
Settings of heading/long range map view ........... 3-15
Changing the Birdview
TM
angle ....................... 3-17
Changing the scale of the left screen ................ 3-20
Map icons ...................................................... 3-22
Displaying landmark icons .............................. 3-22
Map symbols. .............................................. 3-24

Two types of map views are available: Plan View
and Birdview
TM.
PLAN VIEWPlan View displays the map in a 2-dimensional
environment similar to a road map.
NAV2708
Screen information&1
Vehicle icon:
Indicates the current vehicle location and
the direction that you are traveling.
&2
Guide point:
Indicates a guide point on the route.
&3
GPS indicator:
Indicates the GPS reception condition of
signals from the satellites.
*Green: positioning is possible*Gray: positioning is not possible
&4
Remaining time and distance to the
destination:
Indicates the approximate remaining time
and distance to the destination. This indi-
cator will appear when you set the destina-
MAP TYPES3-2
Map settings

tion and start route guidance.
&5Suggested route:
Appears in bold yellow during route gui-
dance.
&6
/
Direction indicator:
Indicates the direction of the map.
&7
Scale indicator:
Indicates the scale of the map.
&8
Arrow:
Indicates the distance to the next guide
point and the turning direction at that guide
point.
NAV2746
BIRDVIEW
TM
Birdview
TM
displays the map from an elevated
perspective. In Birdview
TM, it is easy to recog-
nize an image of the route because it provides a
panoramic view over a long distance.
INFO:
About the Birdview
TM
display
. “Birdview
TM” is a registered trademark of
Xanavi Informatics Corporation.
. The map in Birdview
TM
always appears with
the current forward direction facing up.Map settings
3-3

The map view can be changed between Plan
View and Birdview
TM. The map can also be
displayed in the split screen mode.
NAV2711
1. Push while the current location
map screen is displayed.
NAV2712
2. Highlight [Map View] and push
.
SWITCHING THE MAP VIEW3-4
Map settings