display NISSAN PATHFINDER 2006 R51 / 3.G Navigation Manual

NAV2805
2. Enter the name of the city, highlight [OK] andpush .
INFO:
.
Highlight [All Cities] and push
to include all cities in the
region as the route calculation condition.
.
Highlight [Last 5 Cities] and push
to display 5 cities recently
set as destinations.
NAV2806
3. Highlight the city of the destination facility from the list, and push .
A character input screen is displayed.
Setting a destination
4-39

NAV2787
SETTING A FREEWAY ENTRANCE/
EXIT1. Highlight [Others] and push.
NAV2807
2. Highlight [Freeway Entrance/Exit] and push
.
A character input screen is displayed.
NAV2808
3. Select a region and enter the name of the
freeway.
4. After finishing the entry, highlight [OK] and push .
Setting a destination
4-43

NAV2809
5. Highlight the freeway of the destination fromthe list, and push .
NAV2810
6. Highlight [Entrance] or [Exit] and push
.
A list screen is displayed.
NAV2811
7. Select the preferred destination from the list.
The position of the selected location is
displayed in the preview on the right side
of the screen. Then, push .
4-44
Setting a destination

NAV2812
INFO:
By selecting [By Distance], you can sort the
list by the nearest distance.
NAV2813
8. The selected destination is displayed at the center of the map. Highlight [OK] after
confirming the location of the displayed
destination, and push .
The system sets the destination to the
selected location and starts calculating a
route.
NAV2814
INFO:
Even after setting a destination, you can
adjust the location of the destination, store
the route, etc.“OPERATIONS AFTER SETTING A
DESTINATION” (page 4-50)
Setting a destination
4-45

NAV2787
SETTING BY PHONE NUMBER
INFO:
. If the area code of the specified telephone
number does not exist in the map data, the
system will not search for the location.
. Only the locations included in the database
in the map DVD-ROM can be searched by
the phone number. Personal phone numbers
cannot be used to search for a location.
1. Highlight [Others] and push .
NAV2815
2. Highlight [Phone Number] and push
.
The telephone number input screen is
displayed.
NAV2816
3. Enter the telephone number including the
area code.
4. After finishing the entry, highlight [Map] and push .
“PHONE NUMBER INPUT SCREEN”
(page 2-26)
4-46
Setting a destination

NAV2817
5. The selected destination is displayed at thecenter of the map. Highlight [OK] after
confirming the location of the displayed
destination, and push .
The system sets the destination to the
selected location and starts calculating a
route.
NAV2818
INFO:
Even after setting a destination, you can
adjust the location of the destination, store
the route, etc.“OPERATIONS AFTER SETTING A
DESTINATION” (page 4-50)
NAV2787
SETTING A NEARBY PLACE1. Highlight [Others] and push .
Setting a destination
4-47

NAV2819
2. Highlight [Nearby Places] and push .
NAV2820
3. Highlight the preferred destination facility
and push .
A list screen is displayed.
INFO:
If there is any particular facility type that you
intend to use frequently, you can store it in
the list of nearby facilities.“CUSTOMIZING NEARBY PLACES”
(page 6-33)
NAV2821
4. Highlight the preferred destination from the list, and push .
The position of the selected location is
displayed in the preview on the right side
of the screen.
4-48
Setting a destination

NAV2822
INFO:
If the suggested route is already set, by
highlighting [Show Along Route] and push-
ing , the system displays only the
facilities located along the route.
NAV2823
5. The system sets the destination to the selected location and starts calculating a
route.
INFO:
If the route is already set, the selected
location becomes a waypoint.
NAV2824
INFO:
You can also set the destination by pushing
in the current location map
screen and selecting [Nearby].
Setting a destination
4-49

The following operations are available after you
set a destination.
INFO:
The menu will not be displayed if you select,
[Stored Route] or [Nearby Places] from the
Destination menu.
NAV2863
AVAILABLE SETTING ITEMS. OK:
Sets the destination. If the route is already
set, the location becomes the new destina-
tion, and the route is recalculated.
. Alter Location:
Displays a map screen where you can adjust
the location of the destination.
. Add to Route:
Allows you to add a waypoint to the route
already set. .
POI Info:
Allows you to view information about the
facility that you have set as the destination if
it is included in the map DVD-ROM data.
. Store Location:
Allows you to store the location in the
Address Book.
OPERATIONS AFTER SETTING A
DESTINATION4-50
Setting a destination

VIEWING INFORMATION ABOUT THE
SEARCHED LOCATIONInformation (street address and phone number)
about facilities stored in the map DVD-ROM
data can be displayed.
NAV2868
1. Set the destination using an appropriatemethod.
2. Highlight [POI Info] and push
.
NAV2869
3. Information about the location is displayed.
4. Push
, or highlight [Back] and
push to return to the previous
screen.
Setting a destination
4-53