length NISSAN PICK-UP 2003 Repair Manual

Identification Number
VEHICLE IDENTIFICATION NUMBER
Prefix and suffix designations
JN1: Japan produced vehicle
For Europe
JN1BPUD22UOXXXXXX
Vehicle serial number
O: Stopgap (no meaning)
U: For Europe
Model
G: Long wheelbase (2WD) U: Long wheelbase (4WD)
D: KA24DE engine P: YD25DDTi engine
A: Single Cab B: King Cab C: Double Cab
JN1: Japan produced vehicle
Dimensions
DestinationEurope
Vehicle type 2-wheel drive model 4-wheel drive model
Wheelbase Long Long
Cab or bed type Single cab King cab Double cab Single cab King cab Double cab
Overall length*1 mm (in)5,020 (197.6)
5,180 (203.9)*15,045 (198.6)
5,180 (203.9)*14,955 (195.1)
5,090 (200.4)*15,020 (197.6)
5,180 (203.9)*15,045 (198.6)
5,180 (203.9)*14,955 (195.1)
5,090 (200.4)*1
Overall width mm (in) 1,690 (66.5)1,690 (66.5)
1,825 (71.9)*21,690 (66.5)
1,825 (71.9)*21,825 (71.9) 1,825 (71.9) 1,825 (71.9)
Overall height mm (in)1,610 (63.4)
1,620 (63.8)*41,610 (63.4)
1,620 (63.8)*4
1,700 (66.9)*21,620 (63.8)
1,630 (64.2)*4
1,710 (67.3)*2
1,810 (71.3)*2, *61,700 (66.9)1,700 (66.9)
1,705 (67.1)*3
1,695 (66.7)*51,715 (67.5)
1,815 (71.5)*6
1,720 (67.7)*3
1,820 (71.7)*6, *3
1,710 (67.3)*5
1,810 (71.3)*6, *5
Wheelbase mm (in) 2,950 (116.1) 2,950 (116.1) 2,950 (116.1) 2,950 (116.1) 2,950 (116.1) 2,950 (116.1)
TreadFront mm (in) 1,395 (54.9)1,395 (54.9)
1,525 (60.0)*21,395 (54.9)
1,525 (60.0)*21,525 (60.0) 1,525 (60.0) 1,525 (60.0)
Rear mm (in) 1,390 (54.7)1,390 (54.7)
1,505 (59.3)*21,390 (54.7)
1,505 (59.3)*21,505 (59.3) 1,505 (59.3) 1,505 (59.3)
Ground clearance mm (in)180 (7.1)
190 (7.5)*4180 (7.1)
190 (7.5)*4
240 (9.4)*2180 (7.1)
190 (7.5)*4
240 (9.4)*2230 (9.4)230 (9.4)
240 (9.4)*3
225 (8.9)*5230 (9.1)
240 (9.4)*3
225 (8.9)*5
*1: On step bumper equipped models
*2: 4WD appearance models
*3: With optional 255/70R16 tires
*4: With optional 195R15C tires
*5: With optional 255/60R17 tires
*6: Roof rail equipped models
IDENTIFICATION INFORMATION
GI-4006

Inspection and Adjustment
DRIVE SHAFT (4WD)
Drive shaft joint type
Final drive side TS82F
Wheel side ZF100*
Fixed joint axial end play
limit mm (in)1 (0.04)
Diameter mm (in)
Wheel side (D
1) 29.0 (1.142)
Grease
QualityNissan genuine grease or
equivalent
Capacity g (oz)
Final drive side 95 - 105 (3.35 - 3.70)
Wheel side* 115 - 125 (4.06 - 4.41)
Boot length mm (in)
Final drive side (L
1) 95 - 97 (3.74 - 3.82)
Wheel side (L
2)* 96 - 98 (3.78 - 3.86)
SFA877A
*: ZF100 (Wheel side) joint type has two types of material boot; one is
made of rubber and the other is made of plastic. Do not disas-
semble joint assembly made of plastic boot. If the boot or joint is
damaged, replace the drive shaft assembly.
SERVICE DATA AND SPECIFICATIONS (SDS)
FA-4002

Propeller Shaft
2WD models (For Europe)
Applied modelKA24DE YD25DDTi
Single cab, King cab
Without ABS With ABS 4WD appearance
Without ABS With ABS
Propeller shaft model 3S71H 3S80B
Number of joints3
Coupling type with transmission Sleeve type
Type of journal bearing Solid type (disassembly type)
Shaft length (Spider to spider)
mm (in) 1st 641 (25.24) 642 (25.28) 667 (26.26)
2nd 1,004 (39.53) 978 (38.50) 1,005 (39.57) 979 (38.54)984 (38.74)*1
964 (37.95)*2
Shaft outer diameter
mm (in) 1st 75 (2.95) 65 (2.56)
2nd 65 (2.56) 65 (2.56)
4WD models
Location Front Rear
Applied model KA24DE YD25DDTi KA24DE YD25DDTi
Propeller shaft model 2F63H 2F71H 3S71H 3S80B
Number of joints 2 3
Coupling type with transmis-
sionFlange type Sleeve type
Type of journal bearing Solid type (disassembly type) Solid type (disassembly type)
Shaft length (Spider to spider)
mm (in) 1st 546 (21.50) 565 (22.24) 392 (15.43)372 (14.65)*1
377 (14.84)*2
2nd Ð Ð 870 (34.25)872 (34.33)*1
847 (33.35)*2
Shaft outer diameter
mm (in) 1st 50.8 (2.000) 75 (2.95) 65 (2.56)
2nd Ð 65 (2.56) 65 (2.56)
*1: With C200 final drive
*2: With H233B final drive
SERVICE DATA AND SPECIFICATIONS (SDS)
PD-4002