low beam NISSAN QUEST 2014 RE52 / 4.G Quick Reference Guide

13
HeaDLIGHT CONTr OL SwITCH
HEADLIGHT cONTROL

Turn the headlight control switch to the
position
01 to turn on the front parking, side marker, tail, license

plate and instrument panel lights. Turn the switch to the
position
02 to turn on the headlights.
AUTOLIGHT SYSTEM (if so equipped)

The autolight system will automatically turn the headlights on when it is\
dark and off when it is
light. The system will keep the headlights on for a period of time after you tur\
n the ignition off
and all doors are closed.

To activate the autolight system, turn the headlight control switch to the au TO position
03
then push the ignition switch to ON. To deactivate the autolight system, turn the headlight
control switch to the OFF position,
position 01 or
position
02.
HIGH BEAM SELE cT

Push the headlight control switch forward
04 to

select the high beam function. The blue indicator light
illuminates in the instrument panel. Pull the
headlight switch back to the original position to select
the low beam
. The blue indicator light goes off.

Pull and release the headlight control switch
05 to

flash the headlight high beams on and off.
FOG LIGHT SWIT cH (if so equipped)

The headlights must be on and the low beams

selected for the fog lights to operate.

Turn the switch (inside collar) to the position
06 to

turn the fog lights on.

Turn the switch (inside collar)
to the OFF position to

turn the fog lights off.
LANE c HANGE SIGNAL

To signal a lane change, move the lever up or down to the point where the indicator light
begins to flash, but the lever does not latch.

The turn signal will flash 3 times automatically.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
01
04
03
02
05
06
To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
1490690_14_Quest_QRG_072513.indd 137/25/13 9:24 AM