key fob NISSAN QUEST 2016 RE52 / 4.G Quick Reference Guide
[x] Cancel search | Manufacturer: NISSAN, Model Year: 2016, Model line: QUEST, Model: NISSAN QUEST 2016 RE52 / 4.GPages: 32, PDF Size: 2.43 MB
Page 10 of 32

8
NISSAN INTELLIGENT KEY® SYSTE M
The NISSAN Intelligent Key® System allows you to lock 
or unlock your vehicle, open your liftgate and start the 
engine. It is important to make sure the Intelligent Key 
is with you (that is, in your pocket or purse).
 
    The operating range of the Intelligent Key is 
within 31.5 in (80 cm) from each request switch.
 
    To lock the vehicle, push either door handle 
request switch 
1 or the liftgate request  
switch 
2 or press the  button 3 on the  
key fob.
 
    To unlock the vehicle, perform one of the 
following procedures:
    •  Push either door handle request switch 
1  
or the liftgate request switch 
2; the 
corresponding door will unlock. Push the 
request switch again within 1 minute; all other 
doors will unlock, or
    •  Press the 
 button 4 on the key fob to  
unlock the driver’s side door. Press the 
 
button 
4 again within 1 minute; all other 
doors will unlock.
 
    To open the power liftgate (if so equipped), press 
the 
 button 5 for more than 1 second.
 
    The Intelligent Key can also be used to activate 
the panic alarm by pressing and holding the 
 
button 
6 for more than 1 second. Once activated, the panic alarm and headlights \
will stay on for a period of time. 
INTELLIGENT KEY BATTERY DISCHARGE
 
    If the battery of the Intelligent Key is discharged 
or environmental conditions interfere with 
the Intelligent Key operation, start the engine 
according to the following procedure:
    1.  Move the shift lever to the P (PARK) position.
    2.  Firmly apply the foot brake.
    3.   Touch the ignition switch with the Intelligent 
Key and a chime will sound.
    4.   Within 10 seconds after the chime sounds, push the ignition switch while 
depressing the brake pedal and the engine will start.
For more information, refer to the “Pre-driving checks and adjustments (section 3)”, the “Starting and driving 
(section 5)” and the “Maintenance and do-it-yourself (section 8)” of your Owner’s Manual.
1
3
4
5
6
2
FIRST DRIVE FEATURES
1964370_16a_Quest_US_pQRG_090215.indd   89/2/15   11:07 AM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.  
Page 14 of 32

12
3RD ROW SEAT ADJUSTMENTS 
    To adjust the angle of the seatback, pull the strap 
on the seatback 
1 and lean back. Release the 
strap at the desired angle.
For more information, refer to the “Safety — Seats, seat belts  
and supplemental restraint system (section 1)” of your  
Owner’s Manual.
1
AUTOMATIC DRIVE POSITIONER  
(if so equipped)
     Two positions for the driver’s seat and outside 
mirrors can be stored in the automatic drive 
positioner memory.
 
    Follow this procedure to set the memory positions:
    •  Confirm the shift lever is in the P (PARK) position.
    •  Place the ignition switch in the ON position. 
    •  Adjust the driver’s seat and outside mirrors to the desired positions using the 
adjusting switches for each feature.
    •  Push the SET switch, and within 5 seconds, push the memory switch (1 or 2) for at 
least 1 second.
    •  The indicator light on the memory switch you select will illuminate for approximately  
5 seconds. 
    •  The driver’s seat and outside mirror positions are now set to your preferences.
 
    These memorized positions can also be linked to your NISSAN Intelligent Key®. To link 
a memorized position to your Intelligent Key, press the unlock button on the key fob 
after completing the previous step. 
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
3RD ROW POWER FOLDING SEATS (if so equipped)
     To fold the power 3rd row seats, push the front 
side of the switch 
1 located on the right or left 
side of the cargo area. The corresponding 3rd 
row seatback will be folded down automatically.
 
    Push and hold the rear side of the switch 2. 
A beep will sound and the rear seatback will rise 
up while you are holding the switch. A beep will 
sound when the seatback is returned to its fully 
upright position.
For more information, refer to the “Safety — Seats, seat belts and supplemental restraint system (se\
ction 1)”  of 
your Owner’s Manual.
12
FIRST DRIVE FEATURES
1964370_16a_Quest_US_pQRG_090215.indd   129/2/15   11:07 AM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.