instrument panel NISSAN ROGUE SELECT 2015 2.G Quick Reference Guide

2
NEW SYSTEM FEATURES
SPORT MODE
In the SPORT mode, the engine and transmission
are controlled to set the engine speed higher than
in the D (DRIVE) position. This enhances throttle
response for a sporty performance feel.

The SPORT mode switch
1 is located on the

center console.

To turn the SPORT mode on, push the SPORT
mode switch. The SPORT mode indicator light in
the instrument panel will illuminate. To turn the
SPORT mode off, push the SPORT mode switch again. The SPORT mode indicator
light on the instrument panel will extinguish.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
1
USB ( Universal Serial Bus) CONNECTION PORT/AUX JACK AND
i POD® INTERFACE (if so equipped)
The USB port/Aux jack is located in the center
console under the arm rest

1.

When a compatible USB memory device, iPod®
or auxiliary device is plugged into the USB port/Aux
jack, compatible audio files stored on the device can
be played through the vehicle’s audio system.
For more information, refer to the “Heater, air conditioner, audio,
phone and voice recognition systems (section 4)” of your
Owner’s Manual.
1
REARVIEW MONITOR (if so equipped)
When the shift lever is shifted into the
R (REVERSE) position, the monitor display
shows a rearward view from the vehicle.

The colored guide lines on the display screen
indicate vehicle width and approximate distances
to objects with reference to the vehicle body line:
• Red 1.5 ft (0.5 m); Yellow 3 ft (1 m); Green 7 ft (2 m) and 10 ft (3 m).
For more information, refer to the “Heater, air conditioner, audio, phone and voice recognition systems (section 4)” of
your Owner’s Manual.
1706218_15a_Rogue_Select_QRG_111814.indd 211/18/14 2:44 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.

8
HEADLIGHT CONTROL
HEADLIGHT CONTROL SWITCH

Turn the headlight control switch to the

position
1 to turn on the front parking, side
marker, tail, license plate and instrument panel
lights. Turn the switch to the
position
2 to
turn on the headlights.
HIGH BEAM SELECT

Push the headlight control switch forward
3 to
select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull the headlight switch back to the original
position to select the low beam. The blue indicator light will extinguish.

Pull and release the headlight control switch
4 to flash the headlight high beams on
and off.
LANE CHANGE SIGNAL

Move the lever up or down until the turn signal begins to flash but th\
e lever does not
latch to signal a lane change. Hold the lever until the lane change is completed.

Move the lever up or down until the turn signal begins to flash but th\
e lever does not
latch and release the lever. The turn signal will automatically flash 3 times.

Choose the appropriate method to signal a lane change based on the road and
traffic conditions.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
FIRST DRIVE FEATURES
34
1
2
STARTING/STOPPING THE ENGINE
Depress the brake pedal.

Move the shift lever to the P (PARK) position or
N (NEUTRAL) position.

Turn the ignition switch to START.
TURNING THE ENGINE OFF

Move the shift lever to the P (PARK) position, apply the parking brake and turn the
ignition switch to the LOCK position.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
1706218_15a_Rogue_Select_QRG_111814.indd 811/18/14 2:44 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.

12
FIRST DRIVE FEATURES
CRUISE CONTROL (if so equipped)
The cruise control system enables you to set a
constant cruising speed once the vehicle has
reached 25 mph (40 km/h).

The system will automatically maintain the set
speed until you tap the brake pedal, accelerate,
cancel or turn the system off.

To activate the cruise control, push the ON•OFF
switch
1. The CRUISE indicator light in the
instrument panel will illuminate.

To set a cruising speed, accelerate the vehicle to
the desired speed, push the COAST/SET switch

2 and release. The SET indicator
light in the instrument panel will illuminate. Take your foot off the accelerator pedal. Your
vehicle will maintain the set speed.

To reset at a faster cruising speed, push and hold the ACCEL/RES switch
3.
When the vehicle attains the desired speed, release the switch.

To reset at a slower cruising speed, push and hold the COAST/SET switch
2.
Release the switch when the vehicle slows to the desired speed.

To cancel the preset speed, tap the brake pedal or push the CANCEL switch
4.

To turn off cruise control, push the ON•OFF switch
1. Both the CRUISE indicator
light and SET indicator light in the instrument panel will extinguish.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
3
2
1
4
1706218_15a_Rogue_Select_QRG_111814.indd 1211/18/14 2:44 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.

13
TRIP COMPUTER
With the ignition switch in the ON position,
trip computer
1 modes can be selected
by pressing the
switch 2 on the
instrument panel.

The following modes can be selected in the display:
• Fuel Economy – displays the current and
average fuel consumption.
• Average Speed – displays the average vehicle
speed since the last reset.
• Driving Distance – displays the distance driven since the last reset.
• Elapsed Time – displays the time since the last reset.
• Range (dte) – displays the estimated distance to empty (dte) the vehicle can be
driven before refueling.
• Settings – allows you to set the clock, preferences for alerts, maintenance intervals or
language displays. Turn the
switch 2 to select or adjust menu items
and press the button to set.

To reset Fuel Economy, Average Speed, Driving Distance and Elapsed Time, press the
switch
2 for more than 3 seconds.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
2
1
BLUETOOTH® HANDS-FREE PHONE SYSTEM (if so equipped)
A cellular telephone should not be used
while driving so full attention may be given to
vehicle operation.*
SYSTEM OPERATING TIPS

Press the button to interrupt the voice
prompts at any time and speak a command after
the tone.

To use the system faster, you may speak the
second level commands with the main menu
command on the main menu. For example,
press the
button and after the tone say
“Call Redial”.

The “Help” command can be used to hear a list of
available commands at any time.

Reduce background noise as much as possible by
closing windows and pointing HVAC vents away from
the ceiling.

Speak naturally without long pauses and without raising your voice.
SYSTEM GUIDE
*Some jurisdictions prohibit the use of cellular telephones while drivin\
g.
1706218_15a_Rogue_Select_QRG_111814.indd 1311/18/14 2:44 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.