NISSAN SENTRA 2005 B15 / 5.G Repair Manual

Setting with theList key
TheList key is used when you know the names
of the destinations and waypoints.
1. Enter the first street name where the desti-
nation (waypoints) is located using the
keyboard, then select the
List key.2. Select the first street name using the same
procedures as “Setting with the
Street Address key”.
INFO:
cWhen the
Next Search key is selected, it is
possible to narrow down states and cities. To
use this function, refer to “Setting with the
City key” on page 5-21.
cFor a road where lanes with different traffic di-
rections are shown separately, the list shows
first street name, second street name, ...cWhen entering a street name, enter a minor
street name as the first street and the calcula-
tion will be easier and quicker.
INV1815INV1816
How do I program a destination?5-15
ZREVIEW COPYÐ2005(nav)
Navigation System OMÐUSA_English(nna)
07/10/04Ðdebbie
X

3. Enter the 2nd (intersecting) street name,
then select the
List key.
INFO:
If there are less than 5 streets which intersect
the first street, they will be displayed automati-
cally without selecting the
List key.4. Select the name of the second street.
The [DEST. SETTING (Intersection)] screen
will appear.5. To set the destination (waypoints) , refer to
“Making the system guide the route with de-
tailed options” on page 5-31.
INV1817INV1818INV1819
5-16How do I program a destination?
ZREVIEW COPYÐ2005(nav)
Navigation System OMÐUSA_English(nna)
07/10/04Ðdebbie
X

6. To slightly alter the destination.
Select the
Map key to display the map
screen of the area around the specified des-
tination (waypoints) .7. If necessary, operate the joystick to adjust
the location of the destination (waypoint) .
Press the ENTER button. Select the
Destination key to confirm. The [DEST.
SETTINGS (Intersection)] screen will be
displayed.
To set the destination (waypoint) , refer to
“Making the system guide the route with de-
tailed options” on page 5-31.NOTE:
When the corresponding data does not ex-
ist under the following conditions, the
street name list may not be displayed:
cA street name is being input after the
Citykey has been selected.
cList is being displayed by selection of
the
Listkey.
INV1820INV1821
How do I program a destination?5-17
ZREVIEW COPYÐ2005(nav)
Navigation System OMÐUSA_English(nna)
07/22/04Ðmarlene
X

Setting with theState key
TheState key is used when you select a
state/province to set the destination.
1. Select the
State key.2. The display shows the screen to select
states.
Input a state/province name.INFO:
cIt is not possible to select cities if they are not
in the state/province you set.
cWhen theLast 5 States key is selected, the
history of the previous five settings will be
listed.
INV1822INV1823INV1824
5-18How do I program a destination?
ZREVIEW COPYÐ2005(nav)
Navigation System OMÐUSA_English(nna)
07/10/04Ðdebbie
X

3. The display shows the state list.
Select a state/province name.4. The screen returns to the [DEST. SETTING
(Intersection)] screen.
When the state/province is set, the display
shows the selected state/province next to
the
State key.
Input the street name.
Please refer to “Setting with the
List key” on page 5-15.
Setting with theCity key
TheCity key is used to retrieve an intersection
from the specified city to set the destination.
1. Select the
City key.
cThe display shows the screen to retrieve
cities.
INV1825INV1826INV1827
How do I program a destination?5-19
ZREVIEW COPYÐ2005(nav)
Navigation System OMÐUSA_English(nna)
07/10/04Ðdebbie
X

2. Input a city name. When theLast 5 Cities key is selected, the
history of the previous five settings will be listed.
INFO:
It is not possible to select cities if they are not in
the state/province you set.3. The display shows the city list.
Select a city of your choice.
INV0973INV1829INV1830
5-20How do I program a destination?
ZREVIEW COPYÐ2005(nav)
Navigation System OMÐUSA_English(nna)
07/10/04Ðdebbie
X

4. The screen returns to the [DEST. SETTING
(Intersection)] screen.
When the city is set, the display shows the
selected city next to the
City key.
Input the street name of your choice.
Proceed to “Setting with the
List key” on page
5-15.
SETTING WITH
THE
KEY
The NISSAN Navigation System includes a da-
tabase of Point of Interest (POI) locations such
as restaurants, hotels, and gas stations. (refer to
section 6.)
By using this feature, you can set a Point of Inter-
est location as a destination. For details on how
to use the POI feature, please refer to section 6.
SETTING WITH THECity KEY
Sets the destination (waypoints) on the map
screen of the area in and around the input city.
1. Press the DEST button.
INV1831INV2337
How do I program a destination?5-21
ZREVIEW COPYÐ2005(nav)
Navigation System OMÐUSA_English(nna)
07/10/04Ðdebbie
X

2. Select theCity key on the [DEST. SET-
TING] screen.Setting with theList key
TheList key is used when you know the names
of the destination and waypoints.
1. Enter the characters of the city name which
you wish to set as a destination (waypoints)
using the keyboard on the [DEST. SETTING
(City)] screen, then select the
List key.
INFO:
cWhen the
List key is selected, the data of
the currently-listed cities will be displayed.cIf less than 5 suggested cities remain, they will
be displayed automatically without selecting
the
List key.
INV2338INV1834
5-22How do I program a destination?
ZREVIEW COPYÐ2005(nav)
Navigation System OMÐUSA_English(nna)
07/10/04Ðdebbie
X

2. Select the city name of your destination
(waypoints) on the [DEST. SETTING (City)]
screen.3. To set the destination (waypoints) , refer to
“Making the system guide the route with de-
tailed options” on page 5-31.4. To slightly alter the destination.
Select the
Map key to display the map
screen of the area around the specified des-
tination (waypoints) .
INV1835INV1836INV1837
How do I program a destination?5-23
ZREVIEW COPYÐ2005(nav)
Navigation System OMÐUSA_English(nna)
07/10/04Ðdebbie
X

5. If necessary, operate the joystick to adjust
the location of the destination (waypoints) .
Press the ENTER button. Select the
Destination key to confirm.
The [DEST. SETTING (City)] screen will be
displayed.
To set the destination (waypoints) , refer to
“Making the system guide the route with de-
tailed options” on page 5-31.
cList is being displayed by selection of
the
Listkey.
Setting with theState key
TheState key is used when you select a
state/province to set the destination.
1. Select the
State key.2. The display shows the screen to select
states/provinces.
Input a state/province name.
INV1838INV1839INV1840
5-24How do I program a destination?
ZREVIEW COPYÐ2005(nav)
Navigation System OMÐUSA_English(nna)
07/10/04Ðdebbie
X