immobilizer NISSAN TEANA 2008 Service Manual

BCS-6
< FUNCTION DIAGNOSIS >
BODY CONTROL SYSTEM
FUNCTION DIAGNOSIS
BODY CONTROL SYSTEM
System DescriptionINFOID:0000000003809584
OUTLINE
 BCM (Body Control Module) controls the various electrical components. It inputs the information required to
the control from CAN communication and the signal received from each switch and sensor.
 BCM has combination switch reading function for reading the operation status of combination switches (light,
turn signal, wiper and washer) in addition to a function for controlling the operation of various electrical com-
ponents. It also has the signal transmission function as the passed point of signal and the power saving con-
trol function that reduces the power consumption with the ignition switch OFF.
 BCM is equipped with the diagnosis function that performs the diagnosis with CONSULT-III and various set-
tings.
BCM CONTROL FUNCTION LIST
System Reference
Combination switch reading systemBCS-8, "
System Diagram"
Signal buffer systemBCS-12, "System Diagram"
Power consumption control systemBCS-13, "System Diagram"
Auto light systemEXL-13, "System Diagram" (Xenon type headlamp)
EXL-202, "
System Diagram" (Halogen type headlamp)
Turn signal and hazard warning lamp systemEXL-19, "
System Diagram" (Xenon type headlamp)
EXL-206, "
System Diagram" (Halogen type headlamp)
Headlamp systemEXL-11, "
System Diagram" (Xenon type headlamp)
EXL-200, "
System Diagram" (Halogen type headlamp)
Parking, license plate and tail lamps systemEXL-21, "
System Diagram" (Xenon type headlamp)
EXL-208, "
System Diagram" (Halogen type headlamp)
Front fog lamp systemEXL-17, "
System Diagram" (Xenon type headlamp)
EXL-204, "
System Diagram" (Halogen type headlamp)
Rear fog lamp systemEXL-23, "
System Diagram" (Xenon type headlamp)
EXL-210, "
System Diagram" (Halogen type headlamp)
Exterior lamp battery saver systemEXL-25, "
System Diagram" (Xenon type headlamp)
EXL-212, "
System Diagram" (Halogen type headlamp)
Interior room lamp control system
INL-5, "
System Diagram"Step lamp system
Trunk room lamp system
Interior room lamp battery saver systemINL-9, "
System Diagram"
Front wiper and washer systemWW-5, "System Diagram"
Headlamp washer systemWW-10, "System Diagram"
Warning chime systemWCS-5, "WARNING CHIME SYSTEM : System Diagram"
Door lock systemDLK-11, "System Diagram"
Trunk open systemDLK-38, "System Diagram"
Automatic drive positioner systemADP-12, "AUTOMATIC DRIVE POSITIONER SYSTEM : System
Diagram"
Nissan Vehicle Immobilizer System (NVIS) - NATSSEC-14, "System Diagram"
Vehicle security systemSEC-17, "System Diagram"
Rear window defogger systemDEF-4, "
WITH AV CONTROL UNIT : System Diagram" (With
AV control unit)
DEF-6, "
WITHOUT AV CONTROL UNIT : System Diagram"
(Without AV control unit)

BCS-14
< FUNCTION DIAGNOSIS >
POWER CONSUMPTION CONTROL SYSTEM
Sleep condition
Wake-up operation
 BCM changes from the low power consumption mode to the CAN communication sleep mode when the any
of the BCM wake-up conditions is fulfilled. Only the control with BCM is activated.
 BCM transmits the sleep wake up signal (wake up) to each unit when any of the CAN wake-up conditions is
fulfilled. It changes from the low power consumption mode or the CAN communication sleep mode to the
normal mode.
 Each unit starts the transmission of CAN communication with the sleep wake up signal. In addition, the com-
bination meter transmits the wake up signal to BCM via CAN communication to report the CAN communica-
tion start.
Wake-up condition
CAN sleep condition BCM sleep condition
 Receiving the sleep-ready signal (ready) from all units
 Ignition switch: OFF
 Vehicle security system: Not operation
 Warning chime: Not operation
 Intelligent Key system buzzer: Not operation
 Trunk room lamp switch status: No change
 Stop lamp switch: OFF
 Key slot (card switch) status: No change
 Turn signal indicator lamp: Not operation
Exterior lamp: OFF
 Door lock status: No change
 CONSULT-III communication status: Not communication
 Meter display signal: Non-transmission
 Door switch status: No change
 Rear window defogger: OFF Interior room lamp battery saver: Time out
 Push-button ignition switch illumination: OFF
 Nissan Vehicle Immobilizer System (NVIS) - NATS: Not opera-
tion
 Remote keyless entry receiver communication status: No com-
munication
 ACC indicator lamp: Not operation
 ON indicator lamp: Not operation
BCM wake-up condition CAN wake-up condition
 Trunk lid opener switch: OFF → ON
 Remote keyless entry receiver: Receiving
 Door lock and unlock switch:
NEUTRAL → LOCK, NEUTRAL → UNLOCK
 Front door lock assembly driver side (unlock sensor):
OFF → ON, ON → OFF Receiving the sleep-ready signal (Not-ready) from any units
 Key slot (key switch): OFF → ON, ON → OFF
 Push-button ignition switch (push switch): OFF→ ON
 Hazard switch: OFF → ON
 PASSING switch: OFF → ON, ON → OFF
 TAIL LAMP switch: OFF → ON
 Driver door switch: OFF → ON, ON → OFF
 Passenger door switch: OFF → ON, ON → OFF
 Rear RH door switch: OFF → ON, ON → OFF
 Rear LH door switch: OFF → ON, ON → OFF
 Trunk room lamp switch: OFF → ON, ON → OFF
 Driver door request switch: OFF → ON
 Passenger door request switch: OFF → ON
 Trunk lid request switch: OFF → ON
 Stop lamp switch: ON

DLK-86
< COMPONENT DIAGNOSIS >[WITH INTELLIGENT KEY SYSTEM]
KEY SLOT
KEY SLOT
DescriptionINFOID:0000000003794898
Detect whether Intelligent Key is inserted.
Immobilizer antenna amp checks Intelligent Key transponder.
Component Function CheckINFOID:0000000003794899
1.CHECK FUNCTION
Check key slot (“KEY SW -SLOT”) in Data Monitor mode with CONSULT-III.
Is the inspection result normal?
YES >> Key slot is OK.
NO >> Refer to DLK-86, "
Diagnosis Procedure".
Diagnosis ProcedureINFOID:0000000003794900
1.CHECK FUSE
1. Turn ignition switch OFF.
2. Check 10 A fuse, [No.9, located in fuse block (J/B)].
Is fuse fusing?
YES >> Replace the blown fuse after repairing the affected circuit if a fuse is blown.
NO >> GO TO 2.
2.CHECK KEY SLOT POWER SUPPLY CIRCUIT
1. Disconnect key slot connector.
2. Check voltage between slot harness connector and ground.
Is the inspection result normal?
YES >> GO TO 3.
NO >> Repair or replace key slot power supply circuit.
3.CHECK KEY SLOT GROUND CIRCUIT
Check continuity between key slot harness connector and ground.
Is the inspection result normal?
YES >> GO TO 4.
NO >> Repair or replace harness.
4.CHECK KEY SLOT CIRCUIT
1. Disconnect BCM connector.
2. Check continuity between BCM harness connector and key slot harness connector.
Monitor item Condition
KEY SW-SLOTKey is inserted in key slot: ON
Key is removed from key slot: OFF
(+)
(–)Voltage (V)
(Approx.) Key slot
Connector Terminal
M99 1 Ground Battery voltage
Key slot
GroundContinuity
Connector Terminal
M99 7 Existed

ENGINE CONTROL SYSTEM SYMPTOMS
EC-403
< SYMPTOM DIAGNOSIS >[VQ25DE, VQ35DE]
C
D
E
F
G
H
I
J
K
L
MA
EC
N
P O
1 - 6: The numbers refer to the order of inspection.Va l v e
mecha-
nismTiming chain
55555 55 5EM-65
CamshaftEM-84
Intake valve timing controlEM-65
Intake valve
3EM-97
Exhaust valve
Exhaust Exhaust manifold/Tube/Muffler/
Gasket
55555 55 5EM-34
, EX-
4Three way catalyst
Lubrica-
tionOil pan/Oil strainer/Oil pump/Oil
filter/Oil gallery/Oil cooler
55555 55 5LU-7
, LU-
10, LU-11,
LU-13
Oil level (Low)/Filthy oilLU-7
Cooling
Radiator/Hose/Radiator filler cap
55555 55 45CO-12,
CO-12
Thermostat 5CO-23
Water pumpCO-18
Water galleryCO-2
Cooling fan
5CO-16
Coolant level (Low)/Contaminat-
ed coolantCO-8
NVIS (NISSAN Vehicle Immobilizer System —
NATS)11SEC-14
SYMPTOM
Reference
page
HARD/NO START/RESTART (EXCP. HA)
ENGINE STALL
HESITATION/SURGING/FLAT SPOT
SPARK KNOCK/DETONATION
LACK OF POWER/POOR ACCELERATION
HIGH IDLE/LOW IDLE
ROUGH IDLE/HUNTING
IDLING VIBRATION
SLOW/NO RETURN TO IDLE
OVERHEATS/WATER TEMPERATURE HIGH
EXCESSIVE FUEL CONSUMPTION
EXCESSIVE OIL CONSUMPTION
BATTERY DEAD (UNDER CHARGE)
Warranty symptom code AA AB AC AD AE AF AG AH AJ AK AL AM HA

SEC-1
BODY EXTERIOR, DOORS, ROOF & VEHICLE SECURITY
C
D
E
F
G H
I
J
L
M
SECTION SEC
A
B
SEC
N
O P
CONTENTS
SECURITY CONTROL SYSTEM
INTELLIGENT KEY SYSTEM
BASIC INSPECTION ....... .............................
5
DIAGNOSIS AND REPAIR WORKFLOW ..... .....5
Work Flow ........................................................... ......5
INSPECTION AND ADJUSTMENT .....................8
ECM RE-COMMUNICATING FUNCTION ............. ......8
ECM RE-COMMUNICATING FUNCTION : De-
scription .....................................................................
8
ECM RE-COMMUNICATING FUNCTION : Spe-
cial Repair Requirement ............................................
8
FUNCTION DIAGNOSIS ...............................9
INTELLIGENT KEY SYSTEM/ENGINE
START FUNCTIO N ........................................ .....
9
System Diagram .................................................. ......9
System Description ...................................................9
Component Parts Location ......................................12
Component Description ...........................................13
NISSAN VEHICLE IMMOBILIZER SYSTEM-
NATS ..................................................................
14
System Diagram .................................................. ....14
System Description .................................................14
Component Parts Location ......................................15
Component Description ..........................................16
VEHICLE SECURITY SYSTEM .........................17
System Diagram .................................................. ....17
System Description .................................................17
Component Parts Location ......................................18
Component Description ...........................................19
DIAGNOSIS SYSTEM (BCM) ............................21
COMMON ITEM ..................................................... ....21
COMMON ITEM : CONSULT-III Function (BCM -
COMMON ITEM) .....................................................
21
INTELLIGENT KEY ................................................ ....22
INTELLIGENT KEY : CONSULT-III Function
(BCM - INTELLIGENT KEY) ....................................
22
THEFT ALM ........................................................... ....25
THEFT ALM : CONSULT-III Function (BCM -
THEFT) ................................................................ ....
25
IMMU ...................................................................... ....27
IMMU : CONSULT-III Function (BCM - IMMU) ........27
COMPONENT DIAGNOSIS .........................28
U1000 CAN COMM CIRCUIT ...........................28
BCM ....................................................................... ....28
BCM : Description ....................................................28
BCM : DTC Logic .....................................................28
BCM : Diagnosis Procedure ....................................28
IPDM E/R ................................................................ ....28
IPDM E/R : Description ............................................28
IPDM E/R : DTC Logic .............................................28
IPDM E/R : Diagnosis Procedure ............................28
U1010 CONTROL UNIT (CAN) .........................30
BCM ....................................................................... ....30
BCM : DTC Logic .....................................................30
BCM : Diagnosis Procedure ....................................30
BCM : Special Repair Requirement .........................30
P1610 LOCK MODE .........................................31
Description ...............................................................31
DTC Logic ................................................................31
Diagnosis Procedure ...............................................31
P1611 ID DISCORD, IMMU-ECM .....................32
Description ...............................................................32
DTC Logic ................................................................32
Diagnosis Procedure ...............................................32
P1612 CHAIN OF ECM-IMMU ..........................34

SEC-4
Description .............................................................117
Component Function Check ................................117
Diagnosis Procedure .............................................117
HORN FUNCTION ...........................................118
Description .............................................................118
Component Function Check ................................118
Diagnosis Procedure ............................................118
HAZARD FUNCTION .......................................120
Description .............................................................120
Component Function Check ................................120
Diagnosis Procedure .............................................120
INTELLIGENT KEY SYSTEM/ENGINE
START FUNCTION ..........................................
121
Wiring Diagram - INTELLIGENT KEY SYSTEM/
ENGINE START FUNCTION - ..............................
121
NISSAN VEHICLE IMMOBILIZER SYSTEM-
NATS ................................................................
129
Wiring Diagram - NVIS - ........................................129
VEHICLE SECURITY SYSTEM .......................137
Wiring Diagram - VEHICLE SECURITY SYSTEM
- .............................................................................
137
ECU DIAGNOSIS .......................................144
BCM (BODY CONTROL MODULE) ................144
Reference Value ....................................................144
Wiring Diagram - BCM - ........................................167
Fail-safe .................................................................173
DTC Inspection Priority Chart .............................175
DTC Index .............................................................176
IPDM E/R (INTELLIGENT POWER DISTRI-
BUTION MODULE ENGINE ROOM) ...............
178
Reference Value ....................................................178
Wiring Diagram - IPDM E/R - .................................186
Fail-safe .................................................................189
DTC Index .............................................................191
SYMPTOM DIAGNOSIS ............................192
SECURITY CONTROL SYSTEM .....................192
Symptom Table .....................................................192
ENGINE DOES NOT START WHEN INTELLI-
GENT KEY IS INSIDE OF VEHICLE ...............
193
Description .............................................................193
Diagnosis Procedure .............................................193
STEERING DOES NOT LOCK ........................194
Description .............................................................194
Diagnosis Procedure .............................................194
ENGINE DOES NOT START WHEN INTELLI-
GENT KEY IS INSERTED INTO KEY SLOT ...
195
Description ............................................................195
Diagnosis Procedure .............................................195
SECURITY INDICATOR LAMP DOES NOT
TURN ON OR FLASH ......................................
196
Description ............................................................196
Diagnosis Procedure .............................................196
VEHICLE SECURITY SYSTEM CAN NOT BE
SET ...................................................................
197
INTELLIGENT KEY .................................................197
INTELLIGENT KEY : Description ..........................197
INTELLIGENT KEY : Diagnosis Procedure ..........197
DOOR REQUEST SWITCH .....................................197
DOOR REQUEST SWITCH : Description .............197
DOOR REQUEST SWITCH : Diagnosis Proce-
dure .......................................................................
197
VEHICLE SECURITY ALARM DOES NOT
ACTIVATE ........................................................
199
Description ............................................................199
Diagnosis Procedure .............................................199
VEHICLE SECURITY SYSTEM CAN NOT BE
CANCELED ......................................................
200
INTELLIGENT KEY .................................................200
INTELLIGENT KEY : Description ..........................200
INTELLIGENT KEY : Diagnosis Procedure ..........200
DOOR REQUEST SWITCH .....................................200
DOOR REQUEST SWITCH : Description .............200
DOOR REQUEST SWITCH : Diagnosis Proce-
dure .......................................................................
200
KEY SLOT INDICATOR DOES NOT ILLUMI-
NATE ................................................................
201
Description ............................................................201
Diagnosis Procedure .............................................201
PRECAUTION ...........................................202
PRECAUTIONS ................................................202
Precaution for Supplemental Restraint System
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN-
SIONER" ...............................................................
202
Precaution for Procedure without Cowl Top Cover .202
Precaution Necessary for Steering Wheel Rota-
tion after Battery Disconnect .................................
202
ON-VEHICLE REPAIR ..............................204
KEY SLOT ........................................................204
Removal and Installation .......................................204
PUSH BUTTON IGNITION SWITCH ................205
Removal and Installation .......................................205

SEC-14
< FUNCTION DIAGNOSIS >[INTELLIGENT KEY SYSTEM]
NISSAN VEHICLE IMMOBILIZER SYSTEM-NATS
NISSAN VEHICLE IMMOBILIZER SYSTEM-NATS
System DiagramINFOID:0000000003814906
System DescriptionINFOID:0000000003814907
 The NVIS (NATS) is an anti-theft system by registering an Intelligent Key ID in to the vehicle and prevents
the engine being started by an unregistered Intelligent Key. It has a higher protection against auto thefts that
duplicate mechanical key.
 It performs the ID verification when starting the engine in the same way as the Intelligent Key system. But, it
performs the NVIS (NATS) ID verification when inserting the Intelligent Key and performs the Intelligent Key
ID verification when carrying the Intelligent Key.
 The mechanical key integrated in the Intelligent Key cannot start the engine. When the Intelligent Key bat-
tery is discharged, the NVIS (NATS) ID verification memorized to the transponder integrated with Intelligent
Key is performed by inserting the Intelligent Key into the key slot. If the verification results are OK, the
engine start operation can be performed by the push-button ignition switch operation.
 Locate the security indicator and apply the anti-theft system equipment sticker, forewarn that the NVIS
(NATS) is onboard with the model.
 The security indicator always blinks when the power supply position is in LOCK, OFF and ACC position.
 Up to 4 Intelligent Keys can be registered (Including the standard ignition key) on request from the owner.
 The specified registration is required when replacing ECM, BCM or Intelligent Key. The registrations proce-
dure for NVIS (NATS) and registration procedure for Intelligent Key when installing the BCM, refer to CON-
SULT-III Operation Manual NATS-IVIS/NVIS.
 Possible symptom of NVIS (NATS) malfunction is “Engine can not start”. The engine can be started with the
Intelligent Key system and NVIS (NATS). Identify the possible causes according to “Work Flow”. Refer to
SEC-5, "
Work Flow".
 If ECM other than Genuine NISSAN is installed, the engine cannot be started. For ECM replacement proce-
dure, refer to SEC-8, "
ECM RE-COMMUNICATING FUNCTION : Special Repair Requirement".
PRECAUTIONS FOR KEY REGISTRATION
 The key registration is a procedure that erases the current NVIS (NATS) ID once, and then re-registers a
new ID operation. Therefore the registered Intelligent Key is necessary for this procedure. Before starting
the registration operation collect all registered Intelligent Keys from the customer.
 When registering the Intelligent Key, performs only one procedure to register simultaneously both IDs (NVIS
“NATS” ID registration and Intelligent Key ID registration).
The NVIS (NATS) ID registration is the procedure that registers the IDs stored into the transponder (inte-
grated in Intelligent Key) to BCM.
The Intelligent Key ID registration is the procedure that registers the ID to BCM.
 When performing the Intelligent Key system registration only, the engine cannot be started by inserting the
key into the key slot. When performing the NVIS (NATS) registration only, the engine cannot be started by
pressing the push-button ignition switch when carrying the Intelligent Key. The registrations of both systems
should be performed.
SECURITY INDICATOR LAMP
 Warns that the vehicle is equipped with NVIS (NATS).
JMKIA2503GB

NISSAN VEHICLE IMMOBILIZER SYSTEM-NATS
SEC-15
< FUNCTION DIAGNOSIS >[INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
MA
B
SEC
N
O
P
 The security indicator lamp always blinks when the ignition switch is in the LOCK and ACC position.
NOTE:
Because security indicator lamp is highly efficient, the battery is barely affected.
Component Parts LocationINFOID:0000000003814908
1. BCM M118, M119, M121, M122, M123 2. TCM F23 3. IPDM E/R E10, E11, F12
4. ECM E16 5. Push-button ignition switch M101 6. Key slot M99
7. Combination meter (key warning lamp)
M348. Combination meter (security indicator
lamp) M349. Horn (high) E340, E341
10. Horn (low) E342, E343 11. Control device (detention switch) M57 12. Stop lamp switch E115
13. Remote keyless entry receiver M78
A. Behind the combination meter B. Engine room (LH) C. View with the center console as-
sembly removed
D. Behind the instrument lower panel LH E. Behind the instrument lower panel RH
JMKIA2349ZZ

SEC-16
< FUNCTION DIAGNOSIS >[INTELLIGENT KEY SYSTEM]
NISSAN VEHICLE IMMOBILIZER SYSTEM-NATS
Component Description
INFOID:0000000003814909
1. Inside key antenna (instrument cen-
ter) M1052. Inside key antenna (console) M262 3. Inside key antenna (trunk room) B86
4. Trunk lid lock assembly (trunk room
lamp switch) T55. Front door switch (driver side) B34 6. Power window main switch (door
lock and unlock switch) D5, D6
A. Behind the cluster lid C assembly B. Trunk room
JMKIA2350ZZ
Component Reference
BCMSEC-91
Steering lock unitSEC-78
Push-button ignition switchSEC-92
Door switchDLK-57
Key slotDLK-86
Control device (detention switch)SEC-56
Stop lamp switchSEC-50
Park/neutral position switchSEC-64
Steering lock relaySEC-96
Starter relaySEC-72
Starter control relaySEC-96
Security indicator lampSEC-115
Key warning lampSEC-117

SECURITY INDICATOR LAMP
SEC-115
< COMPONENT DIAGNOSIS >[INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
MA
B
SEC
N
O
P
SECURITY INDICATOR LAMP
DescriptionINFOID:0000000003815070
 Security indicator lamp is located on combination meter.
 NVIS (Nissan Vehicle Immobilizer System-NATS) and vehicle security system conditions are indicated by
blink or illumination of security indicator lamp.
Component Function CheckINFOID:0000000003815071
1.CHECK FUNCTION
1. Perform “THEFT IND” in the “ACTIVE TEST” mode with CONSULT-III.
2. Check security indicator lamp operation.
Is the inspection result normal?
YES >> INSPECTION END
NO >> Go to SEC-115, "
Diagnosis Procedure".
Diagnosis ProcedureINFOID:0000000003815072
1.CHECK SECURITY INDICATOR LAMP POWER SUPPLY CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect combination meter connector.
3. Check voltage between combination meter harness connector and ground.
Is the inspection result normal?
YES >> GO TO 2.
NO >> Check the following.
 10A fuse [No. 11, located in the fuse block (J/B)]
 Harness for open or short between combination meter and fuse.
2.CHECK COMBINATION METER CIRCUIT
1. Disconnect BCM connector.
2. Check continuity between combination meter harness connector and BCM harness connector.
3. Check continuity between combination meter harness connector and ground.
Is the inspection result normal?
YES >> GO TO 3.
NO >> Repair or replace harness.
Te s t i t e m D e s c r i p t i o n
THEFT INDON
Vehicle security indicatorIlluminates
OFF Does not illuminate
(+)
(–)Voltage (V)
(Approx.) Combination meter
Connector Terminal
M34 1 Ground Battery voltage
Combination meter BCM
Continuity
Connector Terminal Connector Terminal
M34 28 M123 141 Existed
Combination meter
GroundContinuity
Connector Terminal
M34 28 Not existed