display NISSAN VERSA 2007 1.G Navigation Manual

NAV2787
SETTING THE PREVIOUS STARTING
POINT
1. Highlight [Others] and push.
NAV2788
2. Highlight [Previous Starting Point] and push
.
NAV2789
3. The starting point of the route of the
previous route guidance is displayed at the
center of the map. Highlight [OK] after
confirming the location of the displayed
destination, and push.
The system sets the destination to the
selected location and starts calculating a
route.
4-30Setting a destination

NAV2787
SETTING FROM STORED ROUTES
1. Highlight [Others] and push.
NAV2791
2. Highlight [Stored Routes] and push
.
A list screen is displayed.
NAV2792
3. Highlight the preferred route from the list
and push.
The route to the destination is set.
INFO:
The stored route includes only locations
(destination and waypoints) and route cal-
culation conditions, not the route itself.
Therefore, when the destination is set using
a stored route, a different route may be
suggested if the current vehicle location is
different from the one when the route was
stored.
4-32Setting a destination

NAV2728
SETTING A POINT OF INTEREST
1. Highlight [Points of Interest] and push
.
NAV2793
2. Highlight the main category and push
.
INFO:
Highlight [By Name] and pushto
include all categories in the route calculation
conditions.
NAV2794
3. Highlight the subcategory and push
.
A character input screen is displayed.
4-34Setting a destination

NAV3086
INFO:
Character input screen for Points of Interest
&1Region:
The region previously entered is auto-
matically displayed. It can be changed.
&2City:
“All” is displayed, and all cities in the
region are available. Route calculation
conditions can be narrowed down by
entering the name of the city.
&3Category:
The preferred facility type can be
selected.
&4Name:
The name of the destination facility can
be selected.
&5Nearby POI:
The system will search for the facility,
based on the type selected, near the
current vehicle location.
&6Symbols/A-Z:
Symbol keys are displayed by high-
lighting [Symbols] and pushing
. Alphabet keys are dis-
played by highlighting [A-Z] and push-
ing.
Setting a destination4-35

NAV3087
4. Highlight [Name] and push.
Enter the name of the destination facility.
NAV3088
5. After finishing the entry, highlight [OK] and
push.
A list screen is displayed.
NAV2798
6. Highlight the preferred destination facility
from the list and push.
4-36Setting a destination

NAV2799
INFO:
By selecting [By Distance], you can sort the
list by the nearest distance.
The position of the selected location is
displayed in the preview on the right side
of the screen.
NAV2800
7. The selected destination is displayed at the
center of the map. Highlight [OK] after
confirming the location of the displayed
destination, and push.
The system sets the destination to the
selected location and starts calculating a
route.
NAV2801
INFO:
Even after setting a destination, you can
adjust the location of the destination, store
the location, etc.
“OPERATIONS AFTER SETTING A
DESTINATION” (page 4-50)
Setting a destination4-37

NAV3089
Changing the region
1. Highlight [Region] and pushto
change the region.
NAV3090
2. Highlight the preferred region and push
.
A character input screen is displayed.
NAV3091
Specifying a city
1. Highlight [City] and pushto
narrow down the route calculation condi-
tions by entering the name of the city.
4-38Setting a destination

NAV3092
2. Enter the name of the city, highlight [OK] and
push.
INFO:
.Highlight [All Cities] and push
to include all cities in the
region as the route calculation condition.
.Highlight [Last 5 Cities] and push
to display 5 cities recently
set as destinations.
NAV2806
3. Highlight the city of the destination facility
from the list, and push.
A character input screen is displayed.
Setting a destination4-39

NAV2787
SETTING A FREEWAY ENTRANCE/
EXIT
1. Highlight [Others] and push.
NAV2807
2. Highlight [Freeway Entrance/Exit] and push
.
A character input screen is displayed.
NAV3093
3. Select a region and enter the name of the
freeway.
4. After finishing the entry, highlight [OK] and
push.
Setting a destination4-43

NAV2809
5. Highlight the freeway of the destination from
the list, and push.
NAV2810
6. Highlight [Entrance] or [Exit] and push
.
A list screen is displayed.
NAV2811
7. Select the preferred destination from the list.
The position of the selected location is
displayed in the preview on the right side
of the screen. Then, push.
4-44Setting a destination