key NISSAN VERSA SEDAN 2013 2.G Quick Reference Guide

4
first drive features
To view detailed in\fstructional videos\f regarding these a\fnd other features\f \fplease go to www.nissanownersin\hfo.mobi
NiSSaN iNTelliGeNT KeY® SYSTeM (if so equipped)
The niSSAn intelligent k ey® system allows you to
lock or unlock your vehicle, open your trunk and start
the engine.
NOTE: It is important to make sure the Intelligent Key is
with you (that is, in your pocket or purse).

The operating range of the intelligent k ey is within
31.5 in (80 cm) from each request switch.

To lock the vehicle, push either door handle request
switch

01 once or press the
button
02 on the
keyfob.

To unlock the vehicle, perform one of the following
procedures:
• Push either door handle request switch

01 once;
the corresponding door will unlock. Push the door
handle request switch

01 again within 5 seconds; all other doors will unlock, or
• Press the

button
03 on the keyfob to unlock the driver’s side door. Press the
button

again; all other doors will unlock.

To open the trunk, press the button
04 for more than 0.5 seconds.

The Intelligent Key can also be used to activate the panic alarm by pressing and holding the

button
05 for more than 1 second. Once activated, the panic alarm and headlights w\
ill stay

on for 25 seconds.
inTe LLiGenT keY BATTe RY diSc HARG e

If the battery of the Intelligent Key is discharged, or
environmental conditions interfere with the intelligent
k ey operation, start the engine according to the
following procedure:
1. Move the shift lever to the P (Par K) position.
2. Firmly apply the foot brake.
3. Touch the ignition switch with the intelligent k ey
and a chime will sound.
4. Within 10 seconds after the chime sounds, push the ignition switch while depressing the
brake pedal and the engine will start.
for more information, refer to the “Pre-driving checks and adjustments (section 3)”, “Starting and driving (section 5)”
and the “Maintenance and do-it yourself (section 8)” of your Owner’s Manual.
0203
04
05
01

STarTi NG/ST oPPiNG TH e eNGiN e
STARTin G THe enGine
cOn TinuOuSLY VAR iABL e TRA nSM iSSiOn
(ni SSAn intelligent k ey
® models only - if so equipped)

Depress the brake pedal.
• If the brake pedal is not depressed, pushing the
ignition switch once enters the A cc mode.
• If the ignition is pushed a second time, the vehicle
will enter the O n mode.

Move the shift lever to P (P arK).

Push the ignition switch to start or stop the engine.
NOTE: It is important to make sure the Intelligent Key is with you (that is, in your pocket or purse).
MAnu AL TRAn SMiSS iO n (if so equipped)

Depress the brake pedal.

Move the shift lever to N (N euTral).

depress the clutch pedal to the floor.

Turn the ignition switch to ST arT.
T uRnin G THe enGine Off

For a Continuously Variable Transmission (NISSAN Intelligent Key® models only - if so
equipped), apply the brake pedal, move the shift lever to the P (P arK) position, apply the
parking brake and push the ignition ST arT/SToP switch to turn the engine off.

For a manual transmission, apply the brake pedal, place the vehicle in 1st gear, apply the
parking brake and turn the ignition switch to the loCK position.
for more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
6
first drive features
To view detailed in\fstructional videos\f regarding these a\fnd other features\f \fplease go to www.nissanownersin\hfo.mobi

cOnnecTinG PROcedu Re
NOTE: The vehicle must be stationary when connecting the phone.
1. Press the

button on the steering wheel. The system announces the available commands.

2. Say: “Connect phone”. The system acknowledges the command and announces the next set
of available commands.
3. Say: “Add phone”. The system acknowledges the command and asks you to initiate connecting
from the phone handset.
4. Initiate connecting from the phone:

The connecting procedure varies according to each cellular phone model. f or detailed
connecting instructions and compatible phones, please visit
www.nissanusa.com/bluetooth.

When prompted for a Passkey code, enter “1234” from the handset. (The Passkey code is
assigned by NISSAN and cannot be changed.)
5. Say a name for the phone when the system asks you to provide one. You can give the phone
a name of your choice.
PHOne BOOk SeTu P
depending on your cell phone, the system may automatically download your \
cell phone’s
entire phonebook to the vehicle’s Bluetooth system.

If the phonebook does not download automatically, 40 entries can be individually downloaded.

To manually download entries:
1. Push the

button on the steering wheel.

2. After the tone, say “Phonebook”.
3. After the next tone, say “Transfer entry”. The system acknowledges the command and
asks you to initiate the transfer from the phone handset. The new contact phone number
will be transferred from the cellular phone to the vehicle.

The transfer procedure varies according to each cellular phone. See your cellular phone’s
owner’s manual for details. You can also visit www.nissanusa.com/bluetooth for
instructions on transferring phone numbers from NISSAN recommended cellular phones.
4. The system repeats the number and prompts you for the next command. When you have
finished entering numbers or transferring an entry, choose “Store”.
5. The system confirms the name, location and number.
MAkin G A cALL fROM TH e PHOneBOO k

1. Press the
button.

2. After waiting for the tone, say “call”.
3. After the next tone, speak a name of a phonebook entry. For example, “Michael Smith”.
4. Confirm the correct name is recognized by saying “Dial” after the tone.
NOTE: In some cases, names stored in all UPPERCASE letters may not be recognized by the
voice recognition system.
system guide
12To view detailed in\fstructional videos\f regarding these a\fnd other features\f \fplease go to www.nissanownersin\hfo.mobi

NaviGaTioN SYSTe M (if so equipped)
Your navigation System can calculate a route from the current location to a pr\
eferred destination.
The real-time map display and turn-by-turn voice guidance will lead you along the route.

The navigation System will continually update your vehicle’s position. if you have deviated
from the original route, it will recalculate the route from your current\
location.
01 button
– Press to change the display brightness between day and night modes. While

the mode is being displayed, the brightness can be adjusted using the SCroll knob. Press
and hold to turn the display off. Press again to turn the display on.
02 N
av button – Press to access the functions of the Navigation System.
03 TraF button – Press to view traffic information on the route (if so equipped).

04 v
oice key – Select to repeat the voice guidance while a route is active. S\
elect and hold to
switch the voice guidance on and off.
05 MaP button – Press to display the current location map screen.

06 S
eTu P button – Press to access the system settings.
07 key – Select to zoom the map in.

08 Touch screen display.

09 BaCK button – Press to return to the previous screen.
10 key – Select to zoom the map out.

11 vol
knob – Turn right to increase the volume or left to decrease the volume.
12 SCroll knob – Turn to scroll through the items in a list. Press to select a menu item.
13 Menu key – Select to access system menu options: “Store Current Position”, “Show

Position/GPS information”, “Show destination information” and “Map Setup”.
14 SD-card location – An SD-card with map data must be inserted here for map functions to operate.
f
or more information, refer to your navigation System Owner’s Manual.
01
11
04
07
10
13
08
0203
09
0506
12
14
To view detailed in\fstructional videos\f regarding these a\fnd other features\f \fplease go to www.nissanownersin\hfo.mobi14
system guide