tow NISSAN VERSA SEDAN 2014 2.G Quick Reference Guide

8
first drive features
wiNDShiel D wiPer
aND waS her SwiTCh
Move the lever to the following positions to operate
the windshield wipers:

01 Mist (MiST) - One sweep operation of
the wipers.

02
Intermittent (iNT) - Move the lever down to the
intermittent position and then rotate the time
control ring
03 to increase or decrease wiper
speeds (if so equipped).

04 Low (lo) - Wipers operate at a continuous
low-speed.

05 High (hi) - Wipers operate at a continuous
high-speed.

06 Washer - Pull the lever toward you to

activate the washer. The wipers will operate several times.
For more information, refer to the “instruments and controls (section 2)” of your Owner’s Manual.
0301
02
04
05
MiST
oFF
i NT
lo
hi
06
HIGH BEAM SELE cT

Push the headlight control switch forward
03
to select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull
the headlight switch back to the original position to
select the low beam. The blue indicator light goes off.

Pull and release the headlight control switch
04 to
flash the headlight high beams on and off.
FOG LIGHT SWIT cH (if so equipped)

The headlights must be on and the low beams

selected for the fog lights to operate.

Turn the switch (inside collar) to the position
05
to turn the fog lights on.

Turn the switch (inside collar)
to the oFF position to
turn the fog lights off.
LANE c HANGE SIGNAL

To signal a lane change, move the lever up or down
to the point where the indicator light begins to flash,
but the lever does not latch.

The turn signal will flash three times automatically.
For more information, refer to the “instruments and controls (section 2)”
of your Owner’s Manual.
03
04
05
1598305_14c_Versa_Sedan_QRG_091013.indd 89/10/13 12:18 PM
To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi