malfunction NISSAN X-TRAIL 2013 Owner´s Manual


> (GLW    0RGHO 7$@
OIL CONTROL SYSTEM (fordiesel engine
model)
GUID-F5 E35C98-7F 4D-4E23-96 65-7CEF2B F92803
JVI0988X
When theignition switchisin the ªONº position,
engine oilinformation isdisplayed.
Engine oilinformation informsthedistance tooil
change, oillevel indication andmalfunction ofoil level
sensor.
1. Distance tooil change
GUID-0C6CE 119-CD5D-44E4-907C-B2 8ACCB06747
The distance tooil change isdisplayed ifthe distance
to oil change isless than 1,500 km(930 miles) .
2. Oil replacement indicator
GUID-537 E1CBF-A948-4E30-B E63-AC30F4 7F8075
When thesetmileage approaches, theengine oil
replacement indicatorwillappear onthe display .After
the oilischanged, resetthedistance tooil change. The
oil replacement indicatorwillnot bereset automati-
cally .To reset thisindicator, seeªSettingsº (P.2-21) .
The distance tooil change intervalcannotbeadjusted
manually .The distance tooil change intervalisset
automatically .
CAUTION:
If the oilreplacement indicatorisdisplayed,
change theengine oilassoon aspossible.
Operating yourvehicle withdeteriorated oilcan
damage theengine.
3. Low level reminder
GUID-B0 ADD144-90CE-4C0F-B F0D-306D7D7AFEF0
If the low level indicator isdisplayed, theengine oil
level islow .If the low level reminder isdisplayed, check
the level using theengine oildipstick. (SeeªEngine oilº
(P .8-10) .)
CAUTION:
The oillevel should bechecked regularly using
the engine oildipstick. Operating withan
insufficient amountofoil can damage theengine
andsuch damage isnot covered bythe
warranty.
4. Oil level sensor warning
GUID-A 99E9E17-02 61-4EDD-8396-B6B68F FB9EAF
If the oilsensor warning isdisplayed, theengine oil
level sensor maybemalfunctioning. ContactaNISSAN
dealer immediately .
Instrume ntsand controls
2-33
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
tired. Failure todo socould cause youtolose
control ofthe vehicle, resulting inaserious
accident.
System operation
GUID-0B 3AD093-EEF1-40B9-86 95-B2ABA1B 786CC
JVI0991X
If the system detects thatdriver attention isdecreas-
ing, themessage ªTimeforadriver break?º appears in
the vehicle information displayandabuzzer sounds
when thevehicle isdriven atspeeds above60km/h
(37 MPH) .
Attention levelindicator:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVI0992X
When theªDriver attentionº displayisselected, you
can view yourattention levelasdetected bythe system.
For more information seeªSettingsº (P.2-21) .
NO TE:
. The attention levelindicator consistsof
eight levels.
. When stopping theengine, thesystem is
reset.
T urning theDriver Attention Alertsystem on
and off
GUID-CA EA4B27-0BBE-4 162-989F-3A0A3B28B80C
T o activate ordeactivate thisfunction, seeªSettingsº
(P .2-21) .
NO TE:
The setting willberetained evenifthe engine is
restarted.
System Malfunction
GUID-9B328 11F-1E3D-485A-BE8E-B EE91D110087
If the Driver Attention Alertsystem malfunctions, the
system warning message willappear inthe vehicle
information displayandthefunction willbestopped
automatically .
Action totake:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Stop thevehicle inasafe location, andthen turnoff
and restart theengine. Ifthe system warning message
continues toappear, havethesystem checked bya
NISSAN dealer.
TRAFFIC SIGNRECOGNITION (ifequipped)
GUID-B4 DC19B1-EA1 A-43B9-940E-735647D4C 6F8
JVI0975X
The Traffic SignRecognition (TSR)system provides
the driver withinformation aboutthemost recently
detected speedlimit.Thesystem captures theroad
sign information withthemulti-sensing frontcamera
unit
*
1
located onthe windshield infront ofthe inside
rearview mirroranddisplays thedetected signsinthe
vehicle information display.For vehicles equipped with
navigation system,thespeed limitdisplayed isbased
on acombination ofnavigation systemdataandlive
camera recognition. TSRinformation isalways dis-
played atthe top ofthe vehicle information display,and
optionally inthe main central areaofthe display screen.
WARNING:
The TSR system isonly intended tobe asupport
device toprovide thedriver withinformation. It
is not areplacement forthe driver's attention to
traffic conditions orresponsibility todrive
safely. Itcannot prevent accidents duetocare-
lessness. Itis the driver's responsibility tostay
alert anddrive safely atall times.
Instrume ntsand controls
2-37
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
T urning theTSR system onand off
GUID-1E6BCB F6-FF04-4185-8DA1-454630A7E 519
T urning theLDW system onoroff isdone using the
[Settings] menuinthe vehicle information display.For
details, seeªVehicle information displayº(P.2-20) .
Perform thefollowing stepstoenable ordisable the
TSR system:
1. Inthe [Settings] menu,selectthe[Driver Assis-
tance] key.
2. Touch [Traffic Sign] toturn thesystem ON/OFF .
System temporarily unavailable
GUID-BA4 EC994-FA78-43F4- 8A11-6FA33E2CC5A 5
If the vehicle isparked indirect sunlight underhigh
temperature conditions(overapproximately 408C
(1048F )and then started, theTSR system maybe
deactivated automatically.The [Not available high
cabin temperature] warningmessage willappear in
the vehicle information display.
Action totake:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
When theinterior temperature isreduced, theTSR
system willresume operating automatically .
System Malfunction
GUID-CB9 A153C-B940 -4796-BEC6-E0CED93B2 DA4
If the TSR system malfunctions itwill beturned off
automatically andthesystem [Malfunction]/[System
error] warning message willappear inthe vehicle
information display.
Action totake:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
If the TSR [Malfunction]/[System error]message
appears, pulloffthe road atasafe location andstop
the vehicle. Turn theengine offand restart theengine.
If the TSR [Malfunction]/[System error]message
continues toappear, havethesystem checked bya
NISSAN dealer.
Maintenance
GUID-40 11F179-FB B0-4982-88ED-C90E38 F62B76
The TSR uses thesame multi-sensing frontcamera
unit that isused bythe Lane Departure Warning
(LDW) system, locatedinfront ofthe interior rearview
mirror. Formaintenance ofthe camera, seeªMulti-
sensing cameraunitmaintenanceº (P.5-41) .
T32A1308 27-AE66DA 86-EADA-49 AF-BE4F-98EA59F26D 29
HEADLIGHT SWITCH
T32A130 827-2D453 01A-C88C-4 C7B-B333-62ABD6D57 6C9
JVI0854X
T ype A
JVI0859X
T ype B
NISSAN recommends thatyouconsult thelocal
regulations concerning theuse oflights.
position
T32A1308 27-22A6378 D-658B-4901-AA34-6B6 32DCB958D
The
position turnsonthe front clearance, tail,
license plateandinstrument panellights.
Instrume ntsand controls
2-39
HEADLIGHT
ANDTURN SIGNAL
SWIT CH
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
Ð When thereisasudden, continuous
change inbrightness.
Ð When driving onaroad thatpasses over
rolling hills,oraroad thathaslevel
differences.
Ð When driving onaroad withmany
curves.
Ð When asign ormirror-like surfaceis
reflecting intenselighttowards thefront
of the vehicle.
Ð When thecontainer, etc.being towed by
a leading vehicleisreflecting intense
light.
Ð When aheadlight onyour vehicle is
damaged ordirty.
Ð When thevehicle isleaning atan angle
due toapunctured tire,being towed,
etc .
. The timing ofswitching thelow beam and
high beam maychange underthefollowing
situations.
Ð The brightness ofthe headlights ofthe
oncoming vehicleorleading vehicle.
Ð The movement anddirection ofthe
oncoming vehicleandtheleading vehi-
cle.
Ð When onlyonelight onthe oncoming
vehicle orthe leading vehicleisillumi-
nated.
Ð When theoncoming vehicleorthe lead-
ing vehicle isatwo-wheeled vehicle. Ð
Road conditions (incline,curve,theroad
surface, etc.).
Ð The number ofpassengers andthe
amount ofluggage.
High beam assist operations:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVI0974X
T ype A
JVI0996X
T ype B
T o activate thehigh beam assist system, turnthe
headlight switchtothe ªAUT Oºposition
*
1
and push
the lever forward
*
2
(high beam position) .The high
beam assist indicator lightinthe meter willilluminate
while theheadlights areturned on.
If the high beam assist indicator lightdoes not illuminate
inthe above condition, itmay indicate that
the system isnot functioning properly.Have thesystem
checked byaNISSAN dealer.
When thevehicle speedlowers toless than approxi-
mately 25km/h (16MPH) ,the headlight remainsthe
low beam.
T o turn offthe high beam assist system, turnthe
headlight switchtothe
position orselect thelow
beam position byplacing thelever inthe neutral
position.
Ambient imagesensor maintenance:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
JVI0975X
The ambient imagesensor
*
1
for the high beam
assist system islocated infront ofthe inside rearview
mirror. To keep theproper operation ofthe high beam
assist system andprevent asystem malfunction, be
sure toobserve thefollowing:
. Always keepthewindshield clean.
. Donot attach asticker (including transparent
material) orinstall anaccessory neartheambient
image sensor.
. Donot strike ordamage theareas around the
ambient imagesensor. Donot touch thesensor
lens thatislocated onthe ambient imagesensor.
If the ambient imagesensor isdamaged duetoan
Instrume ntsand controls
2-41
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-16
Pre-driving checksandadjustments
TROUBLESHOO TINGGUIDE
T32A1308 27-D271D 359-A932-46 DB-8333-9B39CD617627
Symptom Possible cause Action
totake
When pushing theignition switchtostop
the engine The
Shift toPark warning appears onthe
vehicle information displayandtheinside
warning chimesounds continuously or
for afew seconds. (Continuously Variable
T ransmission models) The
shift lever isnot inthe ªPº (Park)
position. Shift
theshift lever tothe ªPº (Park)
position.
When opening thedriver's doortoget
out ofthe vehicle The
inside warning chimesounds con-
tinuously . The
ignition switchisin the ªOFFº
position. Close
thedoor securely .
When closing thedoor aftergetting out
of the vehicle The
Key System Faultwarning inthe
meter blinks inyellow ,the outside chime
sounds 3times andtheinside warning
chime sounds forafew seconds. The
ignition switchisin the ªONº
position. Place
theignition switchinthe ªOFFº
position.
The Shift toPark warning appears onthe
vehicle information displayandtheout-
side chime sounds continuously .(Con-
tinuously Variable Transmission models)The
ignition switchisin the ªOFFº
position andtheshift lever isnot inthe
ªPº (Park) position. Move
theshift lever tothe ªPº (Park)
position andplace theignition switchin
the ªOFFº position.
When pushing therequest switchorthe
ªL OCKº
button onthe Intelligent
K ey tolock thedoor The
outside chimesounds forafew
seconds andallthe doors unlock. The
Intelligent Key isinside thevehicle. Carry
theIntelligent Key with you.
When closing thedoor withtheinside
lock knob turned toªLOCKº The
outside chimesounds forafew
seconds andallthe doors unlock. The
Intelligent Key isinside thevehicle or
luggage room. Carry
theIntelligent Key with you.
When pushing thedoor handle request
switch tolock thedoor The
outside chimesounds forafew
seconds. The
Intelligent Key isinside thevehicle or
luggage room. Carry
theIntelligent Key with you.
A door isnot closed securely . Close
thedoor securely .
The door handle request switchis
pushed beforethedoor isclosed. Push
thedoor handle request switchafter
the door isclosed.
When pushing theignition switchtostart
the engine The
Key System Faultwarning inthe
meter blinks ingreen. The
battery charge islow . Replace
thebattery withanew one. (See
ªBatteryº (P.8-20) .)
The Key System Faultwarning inthe
meter blinks inyellow andtheinside
warning chimesounds forafew seconds. The
Intelligent Key isnot inthe vehicle. Carry
theIntelligent Key with you.
When pushing theignition switch The
Key System Faultwarning inthe
meter illuminates inyellow . It
warns ofamalfunction withthe
electrical steeringlocksystem orthe
Intelligent Key system. Contact
aNISSAN dealer.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-20
Pre-driving checksandadjustments
GUID-17F A495C-3D75-4AC6- BDA1-CF035 C5BC711
Y our vehicle haseither orboth ofthe following security
systems:
. Theft warning
. NISSAN Anti-theft System(NATS)*
The security condition willbeshown bythe security
indicator light.
(* immobilizer)
THEFT WARNING SYSTEM (ifequipped)
GUID-76 C0FFDE-576D -4F0F-954F-F551549C6BCD
The theft warning systemprovides visualandaudio
alarm signals ifparts ofthe vehicle aredisturbed.
Security indicator light
GUID-4DC D2AF1-FA12-44F6 -BC69-8E08 33CCECA6
SIC2045
The security indicator light,located onthe meter panel,
operates whenever theignition switchisin the ªLOCKº
or ªOFFº position. Thisisnormal.
For models withultrasonic sensor
GUID-607 4FDDD-A03 E-4D79-AE83- 4F6D45B64020
How toactivate system:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Close allwindows andsunroof (ifequipped) .
2. Place theignition switchinthe ªOFFº position.
3. Carry theremote controller orthe Intelligent Key
with youand getoutofthe vehicle.
4. Make surethehood andtheback doorareclosed.
Close andlock alldoors withtheremote
controller, theIntelligent Key orthe request switch.
If a door orthe hood isopen, thebuzzer will
sound. Thebuzzer willstop when thedoor is
correctly closed.
5. Confirm thatthesecurity indicator lightcomes on.
The security indicator lightblinks rapidly for
approximately 20seconds andthen blinks slowly.
The system isnow activated. If,during this20-
second timeperiod, thedoor isunlocked bythe
remote controller, theIntelligent Key orthe request
switch, orthe ignition switchisplaced inthe ªONº
position, thesystem willnot activate.
Even when thedriver and/or passengers arein
the vehicle, thesystem willactivate withall
doors locked andtheignition switchoff.Place
the ignition switchinthe ªONº position toturn
the system off.
If the system malfunctions, theshort beep
sounds 5times whenthesystem isactivated.
Have thesystem checked byaNISSAN dealer.
Theft warning systemoperation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The warning systemwillgive thefollowing alarm:
. The hazard indicator blinksandthealarm sounds
intermittently forapproximately 30seconds. (The
alarm willrepeat 8times.) .
The alarm automatically turnsoffafter approxi-
mately 30seconds. However, thealarm reacti-
vates ifthe vehicle istampered withagain.
The alarm isactivated when:
. operating thedoor orthe back doorwithout using
the remote controller, theIntelligent Key orthe
request switch.
. opening thehood (ifequipped) .
. thevolumetric sensingsystem(ultrasonic sensors)
is triggered (whenitis activated) .
. thepower supply isdisconnected.
How tostop alarm:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
. The alarm willstop byunlocking adoor withthe
request switch(ifequipped) orthe ªUNL OCKº
button onthe Intelligent Key .
. The alarm willstop ifthe ignition switchisplaced
in the ªONº position.
Cancel switchforultrasonic sensor:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVP0311X
The ultrasonic sensors
*
A
(volumetric sensing),
located onthe ceiling, detectmovement inthe
passenger's compartment. Whenthetheft warning
system isset tothe armed position, itwill automatically
SECURITY SY STEM
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-22
Pre-driving checksandadjustments
FCC Notice:
For USA:
This device complies withPart15ofthe FCC
Rules. Operation issubject tothe following two
conditions: (1)This device maynotcause harm-
ful interference, and(2)this device mustaccept
any interference received,including interference
that may cause undesired operation.
Note: Changes ormodifications notexpressly
approved bythe party responsible forcompli-
ance could voidtheuser's authority tooperate
the equipment.
For Canada:
This device complies withIndustry Canada
licence-exempt RSSstandard(s) .Operation is
subject tothe following twoconditions: (1)this
device maynotcause interference, and(2)this
device mustaccept anyinterference, including
interference thatmay cause undesired operation
of the device.
Security indicator light
GUID-36B6B 0EC-D25F-4E7B-ACC5-8 1BEC5447E82
SIC2045
The security indicator lightislocated onthe meter
panel. Itindicates thestatus ofNA TS. The
light operates whenever theignition switchisin
the ªLOCKº ,ªOFFº orªACCº position. Thesecurity
indicator lightindicates thatthesecurity systems on
the vehicle areoperational.
If NA TS ismalfunctioning, thislight willremain onwhile
the ignition switchisin the ªONº position.
If the light remains onand/or theengine does
not start, contact aNISSAN dealerforNATS
service assoon aspossible. Besure tobring all
NA TS keys thatyouhave when visiting aNISSAN
dealer forservice.
T32A130 827-F9D40B 17-857A-464 9-A8FE-FBF4C5F2F6AB
WARNING:
. The hood mustbeclosed andlatched
securely beforedriving. Failuretodo so
could cause thehood tofly open andresult
in an accident.
. Never openthehood ifsteam orsmoke is
coming fromtheengine compartment to
avoid injury.
HOOD
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
fully open automatically by:
. pushing thepower backdoorswitch
*
A
on the
instrument panelformore than1second
. pushing theback dooropener switch
*
B
. pushing thepower backdoorbutton
*
C
on the
key formore than1second
The hazard flashes 4times andtheoutside chime
sounds whentheback doorstarts opening.
NO TE:
The back doorcanbeopened bythe power back
door switch
*
A
or the power backdoorbutton
*
C
even ifthe back doorislocked. The
back doorcanbeunlocked andopened inde-
pendently ofthe other doors, evenwhen theyare
locked.
P ower open (hands-free operation)
GUID-961B2 5EC-1E8A-4E34-B404-F0 E5F836460B
JVP0286X
When theback doorisfully closed, theback doorwill
fully open automatically byhands-free operation.
1. Carry theIntelligent Key .
2. Put your hand orluggage nearthehands-free
sensor
*
E
, as illustrated, forabout 1second. 3.
Theback doorwillunlock andautomatically open.
The back doorwillopen regardless ofthe lock status.
The hands-free sensorwillnotfunction underthe
following conditions:
. When theIntelligent Key isnot carried withyou.
. When theback doorisopen.
. When automatic operationofthe back dooris
being performed.
The hazard flashes 4times andtheoutside chime
sounds whentheback doorstarts opening.
JVP0302X
NO TE:
. The back doorcannot beclosed automati-
cally byusing thehands-free sensor
*
E
.
. All doors willlock while thehands-free
sensor isbeing used.
. Ifdirt attaches tothe surface ofthe hands-
free sensor, thesensor maynotfunction.
Wipe thesensor usingaclean cloth.
. Ifwater issplashed tothe area around the
hands-free sensor,itmay cause amalfunc-
tion. .
The operating range
*
F
of the hands-free
sensor iswithin 80mm (3.1in)ofthe center
of the sensor.
CAUTION:
. The back doormayopen evenifsomething
other thanyourhand orluggage entersthe
operating rangeofthe hands-free sensor
when theIntelligent Keyiscarried withyou.
. Even ifthe Intelligent Keyiscarried withyou,
the back doorcannot beopened when
something suchasleather glovesabsorb
the light isput tothe hands-free sensor.
. The back doormaynotopen, ifthe head-
lights, sunlight oranother lightsource
shines directly onthe sensor, oran acces-
sory such asaframe isattached tothe
license plate,evenifyour hand orluggage
enters theoperating rangeofthe hands-free
sensor whentheIntelligent Keyiscarried
with you.
. When washing, waxingormaintaining your
vehicle, placingorreplacing thebody cover,
or splashing watertothe area around the
hands-free sensor,placethepower back
door main switch tothe
*
2
position or
*
3
position.
. The hands-free sensordetects objects by
infrared light.Never movethesensor. Ifthe
location ofthe sensor, angleofthe sensor or
direction oflight irradiation change,itmay
lead tonon-operation, incorrectdetection or
other operating malfunctions.
. Ifthe automatic open/close operationis
performed consecutively, thesafety mode
activates andtheoperation cannotbeper-
Pre-driving checksandadjustments
3-25
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-26
Pre-driving checksandadjustments
formed foracertain periodoftime. Inthis
case, waitforawhile andthen perform the
operation.
P ower close
GUID-CC B3E1AA-F7F C-4580-824E-AE894FFC0FC5
When theback doorisfully opened, theback doorwill
fully close automatically by:
. pushing thepower backdoorswitch
*
A
on the
instrument panel
. pushing thepower backdoorswitch
*
D
on the
lower partofthe back door
. pushing thepower backdoorbutton
*
C
on the
key formore than1second
The hazard flashes 4times andtheoutside chime
sounds whentheback doorstarts closing.
Reverse function
GUID-E38 E5684-FF75 -4567-AC95-7492FB18 146B
The power backdoorwillreverse immediately ifone of
the following actionsisperformed duringpoweropen
or power close.
. pushing thepower backdoorswitch
*
A
on the
instrument panel
. pushing thepower backdoorswitch
*
D
on the
lower partofthe back door
. pushing thepower backdoorbutton
*
C
on the key.
The outside chimesounds whentheback doorstarts
to reverse.
Auto reverse function
GUID-98CB 1259-07F7-4 E7C-9EB2-D4EF10F4 F969
The auto-reverse functionenablestheback doorto
automatically reversewhensomething iscaught inthe
back doorasitis opening orclosing. Whenthecontrol
unit detects anobstacle, theback doorwillreverse and
return tothe fullopen orfull close position.
If asecond obstacle isdetected, theback doormotion
will stop. Theback doorwillenter themanual mode.
A pinch sensor ismounted oneach sideofthe back
door. Ifan obstacle isdetected bythe pinch sensor
during powerclose,theback doorwillreverse and
return tothe fullopen position immediately .
NO TE:
If the pinch sensor isdamaged orremoved, the
power closefunction willnotoperate.
WARNING:
There isasmall distance immediately beforethe
closed position thatcannot bedetected. Make
sure thatallpassengers keeptheirhands, etc.,
clear fromtheback dooropening beforeclosing
the back door.
Manual mode
GUID-FD58C3 34-881E-4F97-9CD8-8548D2267CDB
If power operation isnot available, theback doorcan
be operated manually.Power operation maynotbe
available ifmultiple obstacles havebeen detected ina
single power cycleorifthe battery voltage islow .
When thepower backdoormain switch isin the OFF
position, theback doorcanbeopened manually by
pushing theback dooropener switch.Ifthe power
back dooropener switchispushed duringpoweropen
or close, thepower operation willbecanceled andthe
back doorcanbeoperated manually.
AUT OCL OSURE (ifequipped)
GUID-5E1 D548E-B20 5-4D0F-BE11-4BC09 228D416
If the back doorispulled downtoapartly open
position, theback doorwillpull itself tothe closed
position.
Do not apply excessive forcewhen theauto
closure isoperating. Excessiveforceapplied
may cause themechanism tomalfunction.
CAUTION:
. The back doorwillautomatically closefrom
a partly openposition. To avoid pinching,
keep hands andfingers awayfromback
door opening.
. Donot letchildren operatetheback door.
BACK DOOR RELEASE LEVER
GUID-4A1 D87BC-BEAC-4 21F-8B76-F15FD5B474 D5
JVP0280X
If the back doorcannot beopened withthepower door
lock switch duetoadischarged battery,follow these
steps.
1. Fold therear seats down. SeeªSeatsº (P.1-2) .
2. Insert asuitable toolinthe access opening. Move
the release levertothe right. Theback doorwillbe
unlatched.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3. Push theback dooruptoopen.
Contact aNISSAN dealerassoon aspossible for
repair.
GARAGE MODESYSTEM
GUID-531 CA4F1-7D23 -438C-A1F3-4CA23C52B39B
The back doorcanbeset toopen toaspecific height
by performing thefollowing:
1. Open theback doorusing therequest switchor
the Intelligent Key .
2. Pull theback doordown tothe desired position
and hold theback door(theback doorwillhave
some resistance whenbeing manually adjusted) .
3. While holding theback doorinposition, pressand
hold theback doorswitch
*
D
located onthe
back doorforapproximately 3seconds oruntil 2
beeps areheard.
The back doorwillopen tothe selected position
setting. To change theposition ofthe back door,
repeat steps1-3forsetting theposition ofthe back
door.
CAUTION:
Do not setthe height ofthe back doorbelow
approximately 1/3ofthe way tothe floor using
garage mode.Evenifyou setthe height below
approximately 1/3ofthe way tothe floor, the
height willautomatically beset toapproximately
1/3 ofthe way tothe floor.
T32A130827-F 6C771EA-041B-45A2 -BC6E-E70D 9FACF7EA
WARNING:
. Fuel isextremely flammable andhighly
explosive undercertain conditions. You
could beburned orseriously injuredifit is
misused ormishandled. Alwaysstopthe
engine anddonot smoke orallow open
flames orsparks nearthevehicle when
refueling.
. Fuel maybeunder pressure. Turn thecap a
half ofaturn, andwait forany ªhissingº
sound tostop toprevent fuelfrom spraying
out and possibly causingpersonal injury.
Then remove thecap.
. Use only anoriginal equipment typefuel
filler capasareplacement. Ithas abuilt-in
safety valveneeded forproper operation of
the fuel system andemission controlsys-
tem. Anincorrect capcanresult inaserious
malfunction andpossible injury.
OPENING FUELFILLER LID
T32A1308 27-0D460FB 6-261C-4E00-B4CB-E4FF 034DD8D 4
SP A2336
T o open thefuel filler lid,pull thefuel filler lidrelease
handle.
FUEL FILLER CAP
T32A1308 27-5BDD6 661-9721-4 13B-9229-2776A0BD4 6DC
SP A2800
The fuelfiller capisaratcheting type.Turn thecap
counterclockwise
*
1
to remove. Tightenthecap
clockwise
*
2
until ratchet clicks,morethantwice,
after refueling.
Put thefuel filler caponthe cap holder
*
A
while
refueling.
CAUTION:
If fuel isspilled onthe vehicle body,flushitaway
with water toavoid paintdamage.
Pre-driving checksandadjustments
3-27
FUEL
FILLER LID
&RQGLWLRQ
([FHSWIRU&KLQD