warning light NISSAN X-TRAIL 2013 Owner´s Manual


> (GLW    0RGHO 7$@
Selective doorunlock mode(ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Carry theIntelligent Key with you.
2. Push thedoor handle request switch
*
A
or the
back doorrequest switch
*
B
.
3. Driver's doorhandle orback doorrequest switch:
Only thecorresponding doorwillbeunlocked.
Front passenger's doorhandle request switch:
All doors (including theback door) willbe
unlocked. (Selective doorunlock modeisnot
available.)
4. Push thedoor handle request switchagainwithin
1 minute or5seconds.
5. Alldoors willbeunlocked.
6. Operate thedoor handles toopen thedoors.
All door unlock mode:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Carry theIntelligent Key with you.
2. Push thedoor handle request switch
*
A
or back
door request switch
*
B
.
3. Alldoors andtheback doorwillbeunlocked.
If adoor handle ispulled whileunlocking thedoors,
that door maynotbeunlocked. Returning thedoor
handle toits original position willunlock thedoor. Ifthe
door does notunlock, afterreturning thedoor handle,
push thedoor handle request switchtounlock the
door.
All doors willbelocked automatically unlessoneofthe
following operations isperformed within1minute or30
seconds afterpushing therequest switchwhilethe
doors arelocked.
. Opening anydoors.
. Pushing theignition switch.
If during thepreset timeperiod theªUNL OCKº
button onthe Intelligent Key ispushed, alldoors willbe locked
automatically afterthenext preset time.
Opening powerbackdoor(ifequipped)
GUID-6F6E1 12C-A657-42AE-A90A-4 232E4A066AD
1. Carry theIntelligent Key .
2. Push thepower backdooropener switch
*
C
.
3. Theback doorwillunlock andautomatically open.
The hazard indicator flashes4times andtheoutside
chime sounds.
T o close theback door, pushthepower backdoor
button onthe Intelligent Key ,the power backdoor
switch onthe instrument panelorthe lower partofthe
back door. (SeeªBack doorº(P.3-23) .)
W ARNING SIGNALS
T32A1308 27-300A264 1-0F13-46BD-B700-FFCF 5A9F7997
The Intelligent Key system isequipped withafunction
that isdesigned tominimize improper operations and
to help prevent thevehicle frombeing stolen. The
warning buzzersounds andthewarning lightillumi-
nates orthe warning displayappears onthe vehicle
information displaywhenimproper operations are
detected.
CAUTION:
When thebuzzer sounds andthewarning light
illuminates orthe warning displayappears, be
sure tocheck boththevehicle andtheIntelligent
Key.
Pre-driving checksandadjustments
3-15
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-18
Pre-driving checksandadjustments
Locking doors
GUID-59 C48714-709 2-416E-964F-87ABE0DE37CD
1. Place theignition switchinthe ªOFFº position and
carry theIntelligent Key .
2. Close alldoors (including theback door).
3. Push theªLOCKº button
*
A
on the Intelligent
K ey .
4. Alldoors willbelocked. Thedoor lockindicator
light
(located onthe instrument panel)will
illuminate for1minutes (ifequipped) .
5. Operate thedoor handles toconfirm thatthe
doors havebeen securely locked.
CAUTION:
After locking thedoors usingtheIntelligent Key,
be sure thatthedoors havebeen securely
locked byoperating thedoor handles.
Unlocking doors
GUID-02 C4F53F-111 C-4240-90DA-B021C839 0A59
When youfirst receive thevehicle, thedoor unlock
mode isset tounlock allthe doors withonepush ofthe
ªUNL OCKº button
*
B
. The door unlock modecanbe
switched tothe selective doorunlock mode(if
equipped) .
T o change thedoor unlock modefromonetoanother,
see ªVehicle information displayº(P.2-20) .
All door unlock mode:
1. Push theªUNL OCKº button
*
B
on the Intelligent
K ey .
2. Alldoors (including theback door) willbe
unlocked.
Selective doorunlock mode(ifequipped):
1. Push theªUNL OCKº button
*
B
on the Intelligent
K ey . 2.
The driver's doorwillbeunlocked.
3. Push theªUNL OCKº button
*
B
on the Intelligent
K ey again.
4. Alldoors (including theback door) willbe
unlocked.
Automatic relock:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
All doors willbelocked automatically unlessoneofthe
following operations isperformed within30seconds or
1 minute afterpushing theªUNL OCKº button
*
B
on
the Intelligent Key while thedoors arelocked. Ifduring
this 30seconds or1minute timeperiod, the
ªUNL OCKº button
*
B
on the Intelligent Key is
pushed, alldoors willbelocked automatically after
another 30seconds or1minute.
. Opening anydoor orback door.
. Pushing theignition switch.
Opening orclosing backdoor(ifequipped)
GUID-7A97 DFB7-E05B -4600-BFF6 -A75E59407 982
Opening:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Push thepower backdoor button
*
C
for
more than1second.
2. The back doorwillautomatically open.
The hazard indicator flashes4times andtheoutside
chime sounds.
Closing:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Push thepower backdoorbutton
*
C
.
2. The back doorwillautomatically close.
The hazard indicator flashes4times andtheoutside
chime sounds.
If the button
*
C
is pushed whiletheback door
is being opened orclosed, theback doorwillreverse.
Using panicalarm(ifequipped)
GUID-493 7A23C-01 2A-422A-B E61-A0FEA 679E405
If you arenear yourvehicle andfeelthreatened, you
may activate thealarm tocall attention asfollows:
1. Push theªPANICº
button
*
D
on the
Intelligent Key for more than1second.
2. The theft warning alarmandheadlights (if
equipped) willstay onfor 25 seconds.
3. The panic alarmstops when:
.
It has runfor25 seconds, or
.
Any ofthe buttons onthe Intelligent Key are
pushed. (Note:Panicbutton should bepushed
for more than1second.)
HAZARD INDICATOR AND HORN OPERA-
TION
GUID-D81 C103B-F4 9C-4165-99 66-43D3288AC0B0
When youlock orunlock thedoors orthe back door
with therequest switchorthe remote keyless entry
function, thehazard indicator willflash andthehorn or
the outside chimewillsound asaconfirmation.
The following descriptions showhowthehazard
indicator andoutside chimewillactivate whenlocking
or unlocking thedoors orback door.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-20
Pre-driving checksandadjustments
GUID-17F A495C-3D75-4AC6- BDA1-CF035 C5BC711
Y our vehicle haseither orboth ofthe following security
systems:
. Theft warning
. NISSAN Anti-theft System(NATS)*
The security condition willbeshown bythe security
indicator light.
(* immobilizer)
THEFT WARNING SYSTEM (ifequipped)
GUID-76 C0FFDE-576D -4F0F-954F-F551549C6BCD
The theft warning systemprovides visualandaudio
alarm signals ifparts ofthe vehicle aredisturbed.
Security indicator light
GUID-4DC D2AF1-FA12-44F6 -BC69-8E08 33CCECA6
SIC2045
The security indicator light,located onthe meter panel,
operates whenever theignition switchisin the ªLOCKº
or ªOFFº position. Thisisnormal.
For models withultrasonic sensor
GUID-607 4FDDD-A03 E-4D79-AE83- 4F6D45B64020
How toactivate system:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Close allwindows andsunroof (ifequipped) .
2. Place theignition switchinthe ªOFFº position.
3. Carry theremote controller orthe Intelligent Key
with youand getoutofthe vehicle.
4. Make surethehood andtheback doorareclosed.
Close andlock alldoors withtheremote
controller, theIntelligent Key orthe request switch.
If a door orthe hood isopen, thebuzzer will
sound. Thebuzzer willstop when thedoor is
correctly closed.
5. Confirm thatthesecurity indicator lightcomes on.
The security indicator lightblinks rapidly for
approximately 20seconds andthen blinks slowly.
The system isnow activated. If,during this20-
second timeperiod, thedoor isunlocked bythe
remote controller, theIntelligent Key orthe request
switch, orthe ignition switchisplaced inthe ªONº
position, thesystem willnot activate.
Even when thedriver and/or passengers arein
the vehicle, thesystem willactivate withall
doors locked andtheignition switchoff.Place
the ignition switchinthe ªONº position toturn
the system off.
If the system malfunctions, theshort beep
sounds 5times whenthesystem isactivated.
Have thesystem checked byaNISSAN dealer.
Theft warning systemoperation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The warning systemwillgive thefollowing alarm:
. The hazard indicator blinksandthealarm sounds
intermittently forapproximately 30seconds. (The
alarm willrepeat 8times.) .
The alarm automatically turnsoffafter approxi-
mately 30seconds. However, thealarm reacti-
vates ifthe vehicle istampered withagain.
The alarm isactivated when:
. operating thedoor orthe back doorwithout using
the remote controller, theIntelligent Key orthe
request switch.
. opening thehood (ifequipped) .
. thevolumetric sensingsystem(ultrasonic sensors)
is triggered (whenitis activated) .
. thepower supply isdisconnected.
How tostop alarm:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
. The alarm willstop byunlocking adoor withthe
request switch(ifequipped) orthe ªUNL OCKº
button onthe Intelligent Key .
. The alarm willstop ifthe ignition switchisplaced
in the ªONº position.
Cancel switchforultrasonic sensor:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVP0311X
The ultrasonic sensors
*
A
(volumetric sensing),
located onthe ceiling, detectmovement inthe
passenger's compartment. Whenthetheft warning
system isset tothe armed position, itwill automatically
SECURITY SY STEM
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
switch onthe ultrasonic sensor.
It is possible toexclude theultrasonic (forexample,
when leaving petsinside thecar ortransporting the
vehicle onaferry) .
T o exclude theultrasonic:
1. Close allthe windows.
2. Place theignition switchinthe ªOFFº position.
3. Push thecancel switch
*
B
located onthe ceiling.
The security indicator lightwillstart flashing
rapidly .
4. Close thedoors, hoodandback door. Lockthem
using theremote controller, theIntelligent Key or
the request switch.Thesecurity indicator lightwill
start flashing fasterandabuzzer willsound once.
The ultrasonic sensorisnow excluded fromthetheft
warning system.Allother functions ofthe system
remain activated untilthetheft warning systemis
disarmed again.
For models without ultrasonic sensor
GUID-F6 883F2C-1 8CE-4385-9B AC-D9C25E45F1E2
How toactivate system:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Close allwindows andsunroof (ifequipped) .
The system canbearmed evenifthe
windows areopen.
2. Place theignition switchinthe ªOFFº position.
3. Remove remotecontroller orthe Intelligent Key
from thevehicle.
4. Close alldoors, hoodandback door. Lockall
doors. Thedoors canbelocked withremote
controller orthe Intelligent Key ,door handle
request switch,powerdoorlockswitch or
mechanical key. 5.
Confirm thatthesecurity indicator lightcomes on.
The security indicator lightstays onfor about 30
seconds. Thevehicle security systemisnow pre-
armed. Afterabout 30seconds thevehicle
security systemautomatically shiftsintothearmed
phase. Thesecurity lightbegins toflash once
every approximately 3seconds. If,during this30
seconds pre-armtimeperiod, thedoor isun-
locked, orthe ignition switchisplaced inªONº ,
the system willnot alarm.
Even when thedriver and/or passengers arein
the vehicle, thesystem willactivate withall
doors, hood,andback doorlocked withthe
ignition switchinthe ªLOCKº position. When
placing theignition switchinthe ªONº position,
the system willbereleased.
Theft warning systemoperation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The vehicle security systemwillgive thefollowing
alarm:
. The hazard indicator orheadlight blinksandthe
horn sounds intermittently .
. The alarm automatically turnsoffafter approxi-
mately 30or50 seconds. However, thealarm
reactivates ifthe vehicle istampered withagain.
The alarm isactivated by:
. Unlocking thedoor oropening theback door
without usingthebutton onthe remote controller
or the Intelligent Key ,the door handle request
switch orthe mechanical key.(Even ifthe door is
opened byreleasing thedoor inside lockknob, the
alarm willactivate.)
. Opening thehood. How
tostop alarm:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
. The alarm willstop onlybyunlocking adoor by
pushing theªUNL OCKº button onthe remote
controller orthe Intelligent Key .
. The alarm willnotstop ifthe ignition switchis
placed inthe ªONº position.
NISSAN ANTI-THEFT SYSTEM (NATS)
GUID-5E4 37D07-076 E-4181-8CCF -57AFFB80C485
The NISSAN Anti-Theft System (NATS) willnotallow
the engine tostart without theuse ofthe registered
NA TS key.
If the engine doesnotstart using theregistered NATS
key ,it may bedue tointerference causedby:
. Another NATS key.
. Automated tollroad device.
. Automated paymentdevice.
. Other devices thattransmit similarsignals.
Start theengine usingthefollowing procedure:
1. Remove anyitems thatmay becausing the
interference awayfromtheNATS key.
2. Leave theignition switchinthe ªONº position for
approximately 5seconds.
3. Place theignition switchinthe ªOFFº orªLOCKº
position, andwait approximately 10seconds.
4. Repeat steps2and 3again.
5. Start theengine.
6. Repeat thesteps above untilallpossible inter-
ferences areeliminated.
If this procedure allowstheengine tostart, NISSAN
recommends placingtheregistered NATS key sepa-
rate from other devices toavoid interference.
Pre-driving checksandadjustments
3-21
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-22
Pre-driving checksandadjustments
FCC Notice:
For USA:
This device complies withPart15ofthe FCC
Rules. Operation issubject tothe following two
conditions: (1)This device maynotcause harm-
ful interference, and(2)this device mustaccept
any interference received,including interference
that may cause undesired operation.
Note: Changes ormodifications notexpressly
approved bythe party responsible forcompli-
ance could voidtheuser's authority tooperate
the equipment.
For Canada:
This device complies withIndustry Canada
licence-exempt RSSstandard(s) .Operation is
subject tothe following twoconditions: (1)this
device maynotcause interference, and(2)this
device mustaccept anyinterference, including
interference thatmay cause undesired operation
of the device.
Security indicator light
GUID-36B6B 0EC-D25F-4E7B-ACC5-8 1BEC5447E82
SIC2045
The security indicator lightislocated onthe meter
panel. Itindicates thestatus ofNA TS. The
light operates whenever theignition switchisin
the ªLOCKº ,ªOFFº orªACCº position. Thesecurity
indicator lightindicates thatthesecurity systems on
the vehicle areoperational.
If NA TS ismalfunctioning, thislight willremain onwhile
the ignition switchisin the ªONº position.
If the light remains onand/or theengine does
not start, contact aNISSAN dealerforNATS
service assoon aspossible. Besure tobring all
NA TS keys thatyouhave when visiting aNISSAN
dealer forservice.
T32A130 827-F9D40B 17-857A-464 9-A8FE-FBF4C5F2F6AB
WARNING:
. The hood mustbeclosed andlatched
securely beforedriving. Failuretodo so
could cause thehood tofly open andresult
in an accident.
. Never openthehood ifsteam orsmoke is
coming fromtheengine compartment to
avoid injury.
HOOD
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-28
Pre-driving checksandadjustments
T32A130 827-14230 D6B-19CF-4A48-BBD4 -ACC6D665 2D3B
JVP0301X
WARNING:
Never adjust thesteering wheelwhiledriving so
that fullattention maybegiven tovehicle
operation.
Pull thelock lever
*
1
down andadjust thesteering
wheel up,down, forward orrearward tothe desired
position. Pushthelock lever upsecurely tolock the
steering wheelinplace.
T32A1308 27-4578F2AF -3374-4B0B-A138-63C 171271EEF
WARNING:
Adjust theposition ofall mirrors beforedriving.
Do not adjust themirror positions whiledriving
so that fullattention maybegiven tovehicle
operation.
INSIDE REARVIEW MIRROR
T32A130827- 2B4716E6-0561-4FDD-9 EC1-77C8FA47E57A
While holding theinside rearview mirror,adjustthe
mirror angles untilthedesired position isachieved.
Manual anti-glare type
T32A130827-7 723D8F6-F363-470C-8 E8B-68483 E73CEA6
SP A2143
Pull theadjusting lever
*
1
when theglare fromthe
headlights ofthe vehicle behindyouobstructs your
vision atnight.
Push theadjusting lever
*
2
during theday forthe best
rearward visibility.
Automatic anti-glaretype
T32A1308 27-C685C23 A-1C40-4AFE-89CB-B04451E4C1E 9
SP A2162
The inside rearview mirrorisdesigned sothat it
automatically changesreflection according tothe
intensity ofthe headlights ofthe vehicle following you.
The anti-glare systemwillbeautomatically turnedon
when youplace theignition switchinthe ªONº
position.
When thesystem isturned on,the indicator light
*
B
will illuminate andexcessive glarefromtheheadlights
of the vehicle behindyouwillbereduced.
Push
the
switch
*
A
for 3seconds tomake the
inside rearview mirroroperate normally andthe
indicator lightwillturn off.Push the
switch again
for 3seconds toturn thesystem on.
Do not hang anyobjects onthe mirror orapply
glass cleaner. Doingsowill reduce thesensitiv-
ity ofthe sensor
*
C
, resulting inimproper
operation.
STEERING WHEEL MIRRORS
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-30
Pre-driving checksandadjustments
T32A1308 27-3EAB989 7-9B0B-47AB-BC92-A0FAB01FF 312
WARNING:
. Never drivethevehicle withtheparking
brake applied. Thebrake willoverheat and
fail tooperate andwilllead toan accident.
. Never release theparking brakefromout-
side thevehicle. Ifthe vehicle moves, itwill
be impossible topush thefoot brake pedal
and willlead toan accident.
. Never usetheshift lever inplace ofthe
parking brake.Whenparking, besure the
parking brakeisfully applied.
. Never leavechildren oradults whowould
normally requirethesupport ofothers alone
in your vehicle. Theycould unknowingly
release theparking brakeandinadvertently
become involved inaserious accident.
PEDAL TYPE
GUID-29 9E5FC1-DA0 3-4467-8F83-07CADBC7 0ECA
SP A2331
T o apply theparking brake,firmlydepress theparking
brake pedal
*
1
.
T o release theparking brake,depress andhold thefoot
brake
*
2
and then fullydepress andrelease the
parking brakepedal
*
1
. Before
driving, besure thatthebrake warning lighthas
turned off.
SWIT CHTYPE (models withelectronic
parking brakesystem)
GUID-99B5D B44-0FAE-40C9 -84EB-B94A2 B3BC9A 2
JVP0310X
The electronic parkingbrakecanbeapplied or
released automatically orby operating theparking
brake switch.
Automatic operation
GUID-2CD5 BAA4-829D-4 ED2-907D-61D3F00A1872
The electronic parkingbrakeisautomatically applied
when theengine isturned offwith theignition switch
(for MTmodel) .
The electronic parkingbrakeisautomatically released
as soon asthe vehicle startswhiletheaccelerator
pedal isdepressed.
For CVT model, thedriver's seatbeltneeds tobe
fastened.
WARNING:
. The electronic parkingbrakewillnotbe
automatically appliedifthe engine is
stopped withoutusingtheignition switch
(for example, byengine stalling) . .
Before leaving thevehicle, movetheshift
lever tothe ª1º(1st) orªRº (Reverse) position
(for MTmodel) orªPº (Park) position (CVT
model) andcheck thattheelectronic parking
brake warning light
is illuminated to
confirm thattheelectronic parkingbrakeis
applied. Theelectronic parkingbrakewarn-
ing light willremain onfor aperiod oftime
after thedriver's doorislocked.
CAUTION:
When parking inan area where theoutside
temperature isbelow 08C (32 8F),do not apply
the parking braketoprevent itfrom freezing.
For safe parking, placetheshift lever inthe ª1º
(1st) orªRº(Reverse) position(forMTmodel) or
ªPº (Park) position (CVTmodel) andsecurely
block thewheels.
NO TE:
. To keep theelectronic parkingbrakere-
leased aftertheengine isturned off,place
the ignition switchinthe ªOFFº position,
depress thebrake pedalandpush down the
parking brakeswitch before opening the
driver's door.
. Ifamalfunction occursinthe electric park-
ing brake system (forexample, dueto
battery discharge) ,contact aNISSAN dealer.
P ARKING BRAKE
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
Manual operation
GUID-904 D853F-51E6-4 D60-943F-53D00450A7A9
The electronic parkingbrakewillnotbeautomatically
applied ifthe engine isstopped withoutusingthe
ignition switch(forexample, byengine stalling) .In such
a case, youhave toapply theparking brakemanually .
T o apply: Pulltheswitch up
*
1
. The indicator light
*
A
will illuminate.
T o release: Withtheignition switchinthe ªONº
position, depressthebrake pedalandpush theswitch
down
*
2
. The indicator light
*
A
will turn off.
Before driving, checkthattheelectronic parkingbrake
warning light
goes out.Foradditional information,
see ªWarning/indicator lightsandaudible remindersº
(P .2-12) .
NO TE:
. Abuzzer willsound ifthe vehicle isdriven
without releasing theparking brake.See
ª Audible remindersº (P.2-19) .
. While theelectronic parkingbrakeisapplied
or released, anoperating soundisheard
from thelower sideofthe rear seat. Thisis
normal anddoes notindicate amalfunction.
. When theelectronic parkingbrakeisfre-
quently applied andreleased inashort
period oftime, theparking brakemaynot
operate inorder toprevent theparking
brake system fromoverheating. Ifthis
occurs, operate theelectronic parkingbrake
switch againafterwaiting approximately 1
minute.
. Ifthe electronic parkingbrakemustbe
applied whiledriving inan emergency, pull
up and hold theparking brakeswitch. When
you release theparking brakeswitch, the
parking brakewillbereleased. .
While pulling upthe electronic parking
brake switch during driving, theparking
brake isapplied andachime sounds. The
electronic parkingbrakewarning lightinthe
meter andinthe parking brakeswitch
illuminate. Thisdoes notindicate amalfunc-
tion. Theelectronic parkingbrakewarning
light inthe meter andinthe parking brake
switch turnoffwhen theparking brakeis
released.
. When pulling theelectronic parkingbrake
switch upwith theignition switchinthe
ªOFFº orªACCº position, theparking brake
switch indicator lightwillcontinue toillumi-
nate forashort period oftime.
When towing atrailer (forAustralia, New
Zealand, SouthAfricaandEurope)
GUID-D10 4E447-6887-4 FAC-B2E9-1 062DDCEF362
Depending onthe weight ofthe vehicle andtrailer and
the steepness ofthe slope, theremaybeatendency
for the vehicle tomove backwards whenstarting froma
standstill. Whenthisoccurs, youcan usetheparking
brake switch inthe same wayasaconventional lever
type parking brake.
Before starting onsloping roadswhentowing atrailer,
be sure toread thefollowing toprevent thevehicle
from moving backward unintentionally .
1. Pull and hold theparking brakeswitch while
depressing theaccelerator pedalandengaging
the clutch (MTmodels) .
2. Release theparking brakeswitch assoon asthe
engine isdelivering enoughtorquetothe wheels.
Pre-driving checksandadjustments
3-31
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
4-12
Display screen,heaterandaircondition er,and audio system
V ehicle widthguide lines
*
5
:
Indicate thevehicle widthwhenbacking up.
Predictive courselines
*
6
:
Indicate thepredictive coursewhenoperating the
vehicle. Thepredictive courselineswillbedisplayed
on the monitor whenthesteering wheelisturned. The
predictive courselineswillmove depending onhow
much thesteering wheelisturned andwillnotbe
displayed whilethesteering wheelisin the straight
ahead position.
The front viewwillnotbedisplayed whenthevehicle
speed isabove 10km/h (6MPH) .
WARNING:
. The distance between objectsviewedinthe
rear view maydiffer fromtheactual dis-
tance. Objects inthe rear view willappear
visually opposite fromthose viewed inthe
inside andoutside mirrors.
. Onasnow-covered orslippery road,there
may beadifference betweenthepredictive
course lineand theactual course line.
. The displayed linesonthe rear view will
appear slightly offtothe right because the
rear view camera isnot installed inthe rear
center ofthe vehicle.
NO TE:
When themonitor displays thefront viewand
the steering wheelturnsabout 90degrees or
less from theneutral position, boththeright and
left predictive courselines
*
6
are displayed.
When thesteering wheelturnsabout 90degrees
or more, apredictive courselineisdisplayed
only onthe opposite sideofthe turn.
Bird's-eye view
T32A1308 27-AE9DE 01C-8974-4 FEB-8647-1D E5ADA278A 9
SAA1841
The bird's-eye viewshows theoverhead viewofthe
vehicle whichhelpsconfirm thevehicle position and
the predicted coursetoaparking space.
The vehicle icon
*
1
shows theposition ofthe vehicle.
Note thatthedistance between objectsviewedinthe
bird's-eye viewdiffers fromtheactual distance.
The areas thatthecameras cannotcover
*
2
are
indicated inblack.
After theignition switchisplaced inthe ªONº position,
the nonviewable area
*
2
is highlighted inyellow for3
seconds afterthebird's-eye viewisdisplayed.
When thecorner ofthe vehicle movesclosertoan
object, thecorner sensor (sonar) indicators
*
3
(if
equipped) appear.SeeªParking sensor(sonar)
systemº (P.5-50) formore information.
WARNING:
. Objects inthe bird's-eye viewwillappear
further thantheactual distance becausethe
bird's-eye viewisapseudo viewthatis
processed bycombining theviews fromthe
cameras onthe outside mirrors, thefront
and therear ofthe vehicle. .
Tall objects, suchasacurb orvehicle, may
be misaligned ornot displayed atthe seam
of the views.
. Objects thatareabove thecamera cannotbe
displayed.
. The view forthe bird's-eye viewmaybe
misaligned whenthecamera position alters.
. Aline onthe ground maybemisaligned and
is not seen asbeing straight atthe seam of
the views. Themisalignment willincrease as
the line proceeds awayfromthevehicle.
Front-side view
T32A130 827-D8F5C 67E-C456-4774-A30B -654D3801 D304
SAA1842
Guiding lines:
Guiding linesthatindicate thewidth andthefront end
of the vehicle aredisplayed onthe monitor.
The front-of-vehicle line
*
1
shows thefront partofthe
vehicle.
The side-of-vehicle line
*
2
shows thevehicle width
including theoutside mirrors.
The extensions
*
3
of both thefront
*
1
and side
*
2
lines areshown withagreen dotted line.
The corner sensor (sonar) indicator
*
4
(if equipped)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
4-16
Display screen,heaterandaircondition er,and audio system
and achime willsound once.While theMOD system
continues todetect moving objects, theyellow frame
continues tobe
displayed.
JVH0872X
bird's-eye view
JVH0873X
front view/rear view
In the bird's-eye view,the yellow frame
*
1
is
displayed oneach camera image(front,rear,right,
left) depending onwhere moving objects aredetected.
The yellow frame
*
2
is displayed onview inthe front
view orrear view modes.
While thesensor isbeeping, theMOD system does
not chime.
The MOD icon
*
3
is displayed inblue inthe view
where theMOD system isoperative. TheMOD icon
*
3
is displayed ingray inthe view where theMOD
system isnot operative.
If the MOD system isturned off,the MOD icon
*
3
is
not displayed.
The MOD system willactivate automatically underthe
following conditions:
. When theshift lever isin the ªRº (Reverse)
position.
. When theCAMERA/DISP buttonispushed to
switch fromadifferent screentothe camera view
on the display .
. When vehicle speeddecreases belowapproxi-
mately 8km/h (5MPH) .
. When theignition switchisplaced inthe ªOFFº
position andthen back tothe ªONº position.
The MOD system canbeset toremain inactive inthe
vehicle information display.(See ªDriver Assistanceº
(P .2-21) .)
WARNING:
. Excessive noise(forexample, audiosystem
volume oropen vehicle window) willinter-
fere with thechime sound, anditmay notbe
heard.
. The MOD system performance willbelim-
ited according toenvironmental conditions
and surrounding objectssuchas:
Ð When thereislow contrast between
background andthemoving objects.
Ð When thereisblinking sourceoflight.
Ð When strong lightsuch asanother
vehicle's headlight orsunlight ispre-
sent. Ð
When thereisdirt, water drops orsnow
on the camera lens.
Ð When theposition ofthe moving objects
in the display isnot changed.
. The MOD system mightdetect flowing water
droplets onthe camera lens,white smoke
from themuffler, movingshadows, etc.
. The MOD system maynotfunction properly
depending onthe speed, direction, distance
or shape ofthe moving objects.
. Ifyour vehicle sustains damagetothe parts
where thecamera isinstalled, leavingit
misaligned orbent, thesensing zonemaybe
altered andtheMOD system maynotdetect
objects properly.
. When thetemperature isextremely highor
low, thescreen maynotdisplay objects
clearly. Thisisnot amalfunction.
T urning theMOD system onoroff
GUID-A A5B2549-6C 8A-49E4-B44 8-E087C02404EF
The MOD system isturned onoroff using thevehicle
information display.See ªDriver Assistanceº (P.2-21) .
MOD malfunction
GUID-1ECC1 104-D4DE-4EF2-996D-E9161CFD D1F3
When theorange MODiconisdisplayed inthe view ,
the system isnot functioning properly.This willnot
hinder normal drivingoperation butthesystem should
be inspected byaNISSAN dealer.
&RQGLWLRQ
([FHSWIRU&KLQD