ignition NISSAN XTERRA 2012 N50 / 2.G Quick Reference Guide

startinG/stoPPin G tHE EnG in E
AuTOMATic TRAn SMiSS iO n (if so equipped)

Depress the brake pedal.

Move the shift lever to P (P arK).

Turn the ignition switch to start.

MAnu AL TRAn SMiSS iO n (if so equipped)

Depress the brake pedal.

Move the shift lever to n (nE utral).

depress the clutch pedal to the floor.

Turn the ignition switch to start.

T uRnin G THe enGine Off

f or an automatic transmission, move the shift lever to the P (P arK) position, apply the parking
brake and turn the ignition switch to the loCK position.

For a manual transmission, apply the foot brake, place the vehicle in 1st gear, apply the parking
brake and turn the ignition switch to the loCK position.
for more information, refer to the “starting and driving (section 5)” of your Owner’s Manual.
5To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.
outsiDE mirror Control sWit CH (if so equipped)
The outside mirror control switch is located on the
left side of the instrument panel.

To select the left or right mirror, move the switch
01 .

Adjust each mirror to the desired position using the
switch

02 .

To prevent accidentally moving the mirror, move this
switch

01 to the center “neutral” position.f
or more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
02
01

triP Com PutEr (if so equipped)
With the ignition switch in the on position, modes
of the trip computer

01 can be selected by pressing
the trip computer change button
02 on the
instrument panel.

The following modes can be selected in the display:
• Trip a – measures the distance of one specific trip.
• Trip B – measures the distance of a second specific trip.
• dte (distance to empty) – displays the estimated distance to empty (dte) the vehicle can
be driven before refueling.
• mph – displays the average speed since the last reset.
• mpg – displays the average fuel consumption since the last reset.
• (Journey time) – displays the elapsed time since the last reset.
for more information, refer to the “instruments and controls (section 2)” of your Owner’s Manual.
0201
Blu EtootH® Han Ds-fr EE PH onE systE m (if so equipped)
With an overhead microphone and sound
transmitted through the audio system speakers,
the Bluetooth
® Hands-free Phone System utilizes
Bluetooth wireless technology and voice recognition
to provide hands-free cellular phone communication.

A cellular telephone should not be used while driving
so full attention may be given to vehicle operation.*
SYSTe M OPeRATin G TiPS
close all windows. Surrounding noises may interfere
with system operation and performance.

Press the
button on the steering wheel to activate
voice recognition.

Wait for the tone before speaking.

Begin speaking a command within 5 seconds of the tone.

Speak in a clear and natural voice without pausing
between words.

Look straight ahead and avoid speaking too loudly or too softly.

To go back to the previous command, say “Go back” or “Correction.”

To cancel a voice recognition session, simply wait 5 seconds, say “cancel” or “Quit,” or press
the

button for 5 seconds.


To interrupt the system voice and give a command quickly, press the
button.

To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.11
*Some jurisdictions prohibit the use of cellular telephones while driving.
system guide
microphone