lights NISSAN XTERRA 2013 N50 / 2.G Quick Reference Guide

SEAT ADJUSTMENTS
To slide the seat forward or backward, pull up on



the lever 01 under the front of the seat and slide
forward or bac kward. Release the lever to lock the



seat in position.

To recline the seatback, pull up on the lever 02
and lean bac
k. To bring the seatback forward, pull



the lever up and lean your body forward. Release



the lever to loc

k the seatback in position.
S
EA

T


LIFTER
(if so equipped for driver

’s seat)
Turn either dial 03 to adjust the angle and height of
the seat cushion to the desired position.
L
U M BAR SU PPORT (if so equipped for driver’s seat)
To adjust the seat lumbar area, move the lever 04
forward or bac
kward.
For more information, refer to the “Safety –– Seats, seat belts and
supplemental restraint system (section 1)” of your Owner’s Manual.
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.
REMOTE KEYLESS ENTRY SYSTEM
The Remote keyless Entry System allows you to lock or
unlock your vehicle and turn on the interior lights.
To lock the vehicle, press the
button on your keyfob.

To unlock the driver’s door, press the
button on
your keyfob.
Press the button again within 5 seconds and all doors will unlock.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
LIFTGATE RELEASE
Unlock the liftgate by pressing the
button on the
keyfob twice.
To open the liftgate, pull up on the handle
01 .
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.01
02
04
01
03
6
first drive features
1275731_13_Xterra_NAM_QRG_102612.indd 610/26/12 11:18 AM

To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.8
first drive features
WINDSHIELD WIPER AND WASHER SWITCH
Move the lever to the following positions to operate



the windshield wipers:

01 Mist (MIST) - One sweep operation of the


front wipers.
02 Intermittent (I NT) - Move the lever down to the



I
NT position and then rotate the control ring
03



away from you to increase

INT wiper speeds.
04 Low (LO) - Front wipers operate at a continuous


low-speed.
0301
02
04
05
MIST
OFF
INT
LO
HI
HEADLIGHT CONTROL SWITCH
HEADLIGHT cO NTROL
Turn the headlight control switch to the
position
01 to turn on the front parking, tail, license plate and
instrument panel lights. Turn the switch to the
position 02 to turn on the headlights.
AUTOLIGHT SYSTEM (if so equipped)
The autolight system will automatically turn the headlights on when it is dark and off when it is light.
The system will keep the headlights on for a period of time after you tur\
n the ignition off and
all doors are closed.
To activate the autolight system, turn the headlight control switch to the AUTO position

03 then turn the ignition switch to ON. To deactivate the autolight system, turn the headlight
control switch to the OFF, 01 or
position
02 .
HIGH BEAM SELE
cT
Push the headlight control switc h forward
04 to

select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull
the headlight control switch back to the original
position to select the low beam. The blue indicator
light goes off.
Pull and release the headlight control switc h
05 to
flash the headlight high beams on and off.
FOG LIGHT SWIT
cH (if so equipped)
N

OTE: The headlights must be on and the low beams

selected for the fog lights to operate.
Turn the switch (inside collar) to the position
06
to turn the fog lights on.
Turn the switch (inside collar) to the OFF position to turn the fog lights off.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
01
03
02
04
05
06
1275731_13_Xterra_NAM_QRG_102612.indd 810/26/12 11:18 AM