coolant Oldsmobile Achieva 1995 s User Guide

When you decide it’s safe to lift the hood, here’s what
you’ll see:
A. Coolant surge tank with pressure cap
B. Electric engine fan
If the coolant inside the coolant surge tank is boiling,
don’t do anything else
until it cools down.
5-14

The coolant level should be at or above FULL COLD. If
it isn’t, you may have a leak in the radiator
hoses, heater
hoses, radiator, water pump or somewhere else in the
cooling system.
r
NOTICE:
Engine damage from running your engine
without coolant isn’t covered by your warranty.
If there seems to be no leak, with the engine on check to
see if the electric engine fan is running. If the engine is
overheating, the fan should be running. If it isn’t, your
vehicle needs service.
How to Add Coolant to the Coolant Surge
Tank
If you haven’t found a problem yet, but the coolant level
isn’t at
FULL COLD, add a 50/50 mixture of clean
water (preferably distilled) and a proper antifreeze at the
coolant surge tank, but be sure the cooling system,
including the coolant surge tank pressure cap,
is cool
before you do it.
(See “Engine Coolant” in the Index for
more information about the proper coolant mix.)
5-15

NOTICE:
In cold weather, water can freeze and crack the
engine, radiator, heater core and other parts.
So use the recommended coolant.
1. You can remove the coolant surge tank pressure cap
when the cooling system, including the coolant surge
tank pressure cap and upper radiator hose,
is no
longer hot. Turn the pressure cap slowly about
one-quarter turn to the left and then stop.
5-17

If you hear a hiss, wait for that to stop. A hiss means
there is still some pressure left.
1
A
2. Then keep turning the pressure cap slowly, and
remove it.
3. Then fill the coolant surge tank with the proper mix,
up to
FULL COLD, or just above the small cylinder
at
the base of the opening.
5-18

4. With the coolant surge tank pressure cap off, start the
engine and let it run until
you can feel the upper
radiator hose getting hot. Watch out for the engine
fan.
By
this time, the coolant level inside the coolant
surge tank may be lower.
If the level is lower, add
more of the proper
mix to the coolant surge tank
until the level reaches
FULL COLD, or just above
the small cylinder at the base
of the opening.
5. Then replace the pressure cap. Be sure the pressure
cap is tight.
5-19

b b d
2.3L Quad 4 Engine (CODE D)
When you open the hood, you’ll see:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Engine Oil Dipstick
Automatic Transaxle Fluid Dipstick
(if equipped)
Brake Fluid Reservoir
Air Cleaner
Hydraulic Clutch
Fluid Reservoir (if equipped)
Battery
Windshield Washer Fluid Reservoir
Power Steering Fluid Reservoir
Engine Oil Fill Cap
Engine Coolant Surge Tank
6-9

P P P
3.1L V6 Engine (CODE M)
When you open the hood, you’ll see:
1.
2.
3.
4.
5.
6.
7.
8.
9.
Power Steering Fluid Reservoir
Automatic Transaxle Fluid Dipstick (if equipped)
Brake Fluid Reservoir
Air Cleaner
Battery
Windshield Washer Fluid Reservoir
Engine Oil Dipstick
Engine Oil
Fill Cap
Engine Coolant Surge Tank
6-10

When to Change Engine Oil
See if any one of these is true for you:
0
0
0
0
Most trips are less than 5 to 10 miles (8 to 16 km).
This is particularly important when outside
temperatures are below freezing.
Most trips include extensive idling (such as frequent
driving in stop and go traffic).
Most trips are through dusty areas.
You frequently tow a trailer or use a carrier on top of
your vehicle.
If any one of these is true for your vehicle, then
you
need to change your oil and filter every 3,000 miles
(5 000 km) or 3 months -- whichever comes first.
If none of them is true, change
the oil and filter every
7,500 miles (12 500 km) or 12 months -- whichever
comes first.
Engine Coolant Heater
An engine coolant heater can be a big help if you have
to park outside
in very cold weather, 0 OF (- 18 O C) or
colder. If your vehicle has this option, see “Engine
Coolant Heater” in the Index.
What to Do with Used Oil
Did you know that used engine oil contains certain
elements that may be unhealthy for your skin and could
even cause cancer? Don’t let used oil stay on your skin
for very long. Clean your skin and nails with soap and
water, or
a good hand cleaner. Wash or properly throw
away clothing or rags containing used engine oil. (See
the manufacturer’s warnings about the use and disposal
of oil products.)
Used oil can be a real threat
to the environment. If you
change your own
oil, be sure to drain all free-flowing oil
from the filter before disposal. Don’t ever dispose of oil
by putting it in the trash, pouring it on the ground, into
sewers, or into streams or bodies of water. Instead,
recycle it by taking
it to a place that collects used oil. If
you have a problem properly disposing of your used oil,
ask your retailer, a service station or
a local recycling
center for help.
-
6-15

Hydraulic Clutch
The hydraulic clutch linkage in your vehicle is
self-adjusting. The clutch master cylinder reservoir
is
filled with hydraulic clutch fluid.
It isn’t a good idea to “top off’ your clutch fluid. Adding
fluid won’t correct
a leak.
A fluid loss in this system could indicate a problem.
Have the system inspected and repaired.
When to Check and What to Use
Refer to the Maintenance
Schedule to determine how
often you should check the
fluid level in your clutch
master cylinder reservoir
and for the proper fluid. See
“Owner Checks and
Services” and
“Recommended Fluids and
Lubricants” in the Index.
How to Check
If you can see fluid in the reservoir, the level is
acceptable.
Engine Coolant
The following explains your cooling system and how to
add coolant when it is low.
If you have a problem with
engine overheating, see “Engine Overheating”
in the
Index.
The proper coolant for your Oldsmobile will:
0 Give freezing protection down to -34°F (-37°C).
Give boiling protection up to 262°F ( 128 O C).
0 Protect against rust and corrosion.
0 Help keep the proper engine temperature.
0 Let the warning lights work as they should.
6-21

What to Use
Use a mixture of one-half clearz water (preferably
distilled) and one-half antifreeze that meets
“GM
Specification 182SM,” which won’t damage aluminum
parts. You can also use a recycled coolant conforming to
GM Specification 1825M with a complete coolant flush
and refill. Use
GM Engine Coolant Supplement (sealer)
with any complete coolant flush and refill.
If you use
this mixture, you don’t need to add anything else.
I
I NOTICE:
If you use an improper coolant mix, your engine
could overheat and be badly damaged. The
repair cast wouldn’t be covered by your
warranty.
Too much water in the mix can freeze
and crack the engine, radiator, heater core and
other parts.
6-22