start stop button Oldsmobile Cutlass Supreme 1995 Owner's Manuals

~
~ ~~ ~~~ ~. - ~__~
I!” sure the shift lever
is fully into PARK (P) range
before starting the engine. Your Oldsmobile has a
!brake-transaxle shift interlock. You must fully apply
your regular brakes before you can shift from PARK (P)
Bwhen the ignition is in
RUN. If you cannot shift out of
PARK.(P), ease pressure on the shift lever by pushing
it all the way into PARK (P) while keeping the brake
pedal pushed down. Release the shift lever button
if you
have a console shift. Then move the shift lever out
of
PARK (P), being sure to press the shift lever button if
you have a console shift. See “Shifting Out of
PARK (P)” in the Index.
REVERSE (R): Use this gear to back up.
NOTICE:
Shifting’ to REVERSE (R) while your vehicle is :
moving forward could damage your transaxle.
Shift to REVERSE (R) only after your vehicle
is
stopped.
To rock your vehicle back and forth to get out of snow,
ice or sand without damaging your transaxle, see
“Stuck: In Sand, Mud, Ice or Snow” in the Index.
~ ~~~~
~~~ .
NEUTRAL (N): In this position, your engine doesn’t
connect with the wheels.
To restart when you’re
already moving, use NEUTRAL
(N) only. Also, use
NEUTRAL
(N) when your vehicle is being towed.
I NOTICE:
Damage to your transaxle caused by shifting out
of
PARK (P) or NEUTRAL (N) with the engine
racing isn’t covered by your warranty.

I
.. I. ,. , I
-It is dirt); scratched or Wet.
..
FWD: Press and hold,this button to advance to a
It is very humid. If so, wait about an hour and try . . passage quickly. You -will hear sound at a reduced
volume. The display will show elapsed time.
again.
RCL: Press this button to see which track is playing.
Press it again- within five seconds to see how long it has
been playing. (elapsed time). To change what
is normally
J COW: Press this button to make soft and loud
passages more nearly equal in volume. COMP will appear on the display.
shown on the display (track or elapsed time), press the
RDM: Press this button to hear the tracks in random
button .until you see the display you want, then hold the.
order. Press it again to
turn off random'play.
. button until the display flashes. ' , " AM/FM: Press this button to play the radio when.a disc
SEEK: Press the down mow to go to the start of the 3;'. is playing. The disc will stop but'remain in the player.
CD: Press this button to change.to the disc function
when the radio
is on. The disc will start playing at the
point where it
was stopped. A box will appear around
CD on the display when the disc is active.
' current track, if more than eight seconds. have,piayed: 8''
'. 8 Press the up arrow to go to the next track. If you hold-
the button or press it more than once, the player will
1 continue miwing back or forward through the disc.
-button again to stop scanning. If you turn
off the ignition or radio with a disc in the
3-14
- - -
REV: Press and hold this button to return to a passage
quickly. You will hear sound at a reduced volume. The
display will show elapsed time.
,
player, it will stay in the player. When ,you turn' on the
ignition or system, the disc will start playing where
it
was stopped.