tow bar OLDSMOBILE SILHOUETTE 1995 Owners Manual

Dump and Stow Feature
I 3 I
The second and third row bucket seats have been
designed to allow them to fold fully upward and forward
when the seats are anchored in the rear-most position.
This design improves both luggage/cargo capacity and
rear seat entrylexit.
To use this feature on RIGHT ONLY seats: Lift the
upper lever to fold the seatback forward. Push the lower
lever back and tilt the entire seat aqd seatback forward.
To use this feature on CENTER OR LEFT or LEFT
ONLY seats: Lift the upper lever to fold the seatback
forward. Push down on the rear release bar (located
behind the seat), and tilt the entire seat and seatback
forward.
To release the RIGHT ONLY seat from this position:
Push the lower lever back,
while you pull the entire seat
back to the upright position. Lift the upper lever to lift the seatback
up again. Push and pull on t'7e seat and the
seatback to be sure both are locked into
, Isition.
To release the CENTER OR
LEFT or LEFT ONLY seat
from this position: Push the rear release
bar, while you
pull the entire seat back to the upright position. Lift the
upper lever to lift the seatback up again.
Push and pull
on the seat and the seatback to be sure both are locked
into position.
1-6
ProCarManuals.com

Removing Rear Bucket Seats
Removing the RIGHT ONLY Seats
1. Lift the upper lever to fold the seatback forward.
2. Push the lower lever back and tilt the entire seat and
seatback forward.
3. From behind the seat, support the top portion of the
seat with one hand as you squeeze the front release
bar toward the crossbar. The seat will release from
the floor pins.
1-8
ProCarManuals.com

3. From behind the seat, support the top portion of the
seat with one hand
as you squeeze the front release
bar toward the crossbar. The seat will release from
the floor pins.
Adjusting Rear Seats
Each rear seat location has two sets of floor pins. Seats
equipped with the built-in child restraint option must be secured in the rear set of floor pins. Seats that don't have
the built-in child restraint option can be secured in either
set of
floor pins. Move the position of these seats up or
back to provide a little more room behind or in front of a
seat.
1-10
ProCarManuals.com

Towing from the Rear -- Vehicle Hookup
Before hooking up to a tow truck, be sure to read all the
information on “Towing Your Vehicle” earlier in this
section.
1. Attach T-hook chains on both sides, in the slotted
holes in the frame rails, just ahead
of the rear wheels.
2. Position the lower sling crossbar directly under the
rear bumper.
No 4x4 wood beam is needed.
5-13
ProCarManuals.com