diagram OLDSMOBILE SILHOUETTE 1996 Owners Manual

Remova ~ Rear Bucket Seats
SEAT LOCATION
There are three types of rear bucket seats: RIGHT
ONLY, CENTER OR LEFT and LEFT ONLY. RIGHT
ONLY and LEFT ONLY seats may be equipped with the
built-in child restraint option. The
rear bucket seats can be removed to provide extra
storage. Each seat that has the built-in child restraint
option fits in ’only one location in your vehicle. Seats
that don’t have the built-in child restraint can
be moved
to different floor locations. The back of each seat has a
diagram (similar to the one pictured) that shows where
the seat must
be located in your vehicle.
RIGHT ONLY seats that don’t have the built-in child
restraint fit only in the right locations.
LEFT ONLY
seats that don’t have the built-in child restraint fit only
in the left locations, The
CENTER OR LEFT seat fits in
the center location and in either left location.
RIGHT ONLY seats that have the built-in child restraint
option fit only in the rear set
of floor pins in the right
location
of the second row. LEFT ONLY seats that have
the built-in child restraint option fit
only in the rear set
of floor pins in the left location of the second row.
1-5
ProCarManuals.com

Replacing Rear Bucket Seats
I1 I iI
I
-
CAUTION-
TO HELP AVOID PERSONAL INJURY.
SECURELY LATCH SEAT IN LocATlON SHOWN. SEE OWNERS MANUAL FOR ADDITIONAL INFORMATION.
Follow the diagram on the back of the seats to replace
the seats in their proper location.
The LEFT ONLY seats fit only in the left positions. The
RIGHT ONLY seats fit only in the right positions. The
CENTER OR LEFT seat fits in the center position and
in either left position.
Don’t try to place the seats in backward, because they
won’t latch that way.
A seat that isn’t locked into place properly can
move around in
a collision or sudden stop. People
in the vehicle could be injured. Be sure to lock
the seat into place properly when installing it.

1. With the entire seat tilted forward, place the front
hooks of the seat latch onto the front
floor pins.
2. Firmly press the rear hooks onto the rear floor pins.
The seat should lock into position.
3. Push and pull on the seat to check that it is locked.
4. Lift the upper lever and pull up on the seatback until
it locks upright. Push and pull on the seatback to be
sure that it is locked.
1-11
ProCarManuals.com

Your instrument panel is designed to let you know at a
glance how your vehicle is running. You’ll know how fast
you’re going, how much fuel you’re using, and many
other things you’ll need to drive safely and economically.
Refer to the accompanying diagram
of your instrument
panel to locate
the components listed below.
1. Side Vents
2. Lamp Controls
3. Turn Signal/Multifunction Lever
4. Tilt Steering Wheel Lever
5. Instrument Cluster
6. Gearshift Lever
7. Wiper/Washer Controls
8. Center Vents
9. Storage Compartment
10. Side Vents
1 1. Circuit Breaker/Relay Panel
12. Glove Box/Fuse Panel
13. Audio System
14. Rear Fan Controls
15. CupholdedAshtray
16. Locking Storage Bin
1 7. Lighter
18. Interior Lights Override Switch
19. Climate Controls
20. Hazard Warning Flashers Switch
21. Ignition Switch
22. Horn
23. Steering Wheel Touch Controls (Option)
2-69
ProCarManuals.com