seats OLDSMOBILE SILHOUETTE 1997 Owners Manual

The 1997 Oldsrnobile Silhouette Owner’s Manual
1-1
2- 1
3-1
4- 1
5-1
6- 1
7- 1
8-1
9- 1
Seats and Restraint Systems
This section tells you how to use your seats and safety belts properly. It also explains the “SRS” system.
Features and Controls
This section explains how to start and operate your Oldsmobile.
Comfort Controls and Audio Systems
This section tells you how to adjust the ventilation and comfort controls and how to operate your audio system.
Your Driving and the Road
Here you’ll find helpful information and tips about the road and how to drive under different conditions.
Problems on the Road
This section tells what to do if you have a probletn while driving, such as a flat tire or overheated engine, etc.
Service and Appearance Care
Here the manual tells you how to keep your Oldsmobile running properly and looking good.
Maintenance Schedule
This section tells you when to perform vehicle manitenance and what fluids and lubricants to use.
Customer Assistance Information
This section tells you how to contact Oldsmobile for assistance and how to get service and owner publications.
It also gives you information on “Reporting Safety Defects” on page 8-8.
Index
Here’s an alphabetical listing of almost every subject in this manual. You can use it to quickly find
something you want to read.
i
ProCarManuals.com

Section 1 Seats and Restraint Systems
Here you’ll find information about the seats in your Oldsmobile and how to use your safety belts properly. You can
also learn about some things you should
not do with air bags and safety belts.
1-2
1-2
1-3
1-3
1 -4
1-6
1-6
1-6
1-7 1-7
1-8
1-18
1-26
1-30 Seats
and Controls
Manual Seats
Power Seats
Folding Driver’s Seatback
Reclining Front Seatbacks
Manual Lumbar Control
Head Restraints
Rear Seats Second Row Safety Belt Stowage
Dump and Stow Feature
Solid Bench Seats
Split Bench Seats
Captain Chairs
Why Safety Belts Work 1-33
1-34
1-42 1-43
1-49
1-52
1-56
1-58
1-68
1-69
1-80 1-80
1-80 Questions
Many People Ask About
Safety Belts
How to Wear Safety Belts Properly
Safety Belt Use During Pregnancy
Questions and Answers About Air Bags
Reat Seat Passengers
Rear Safety Belt Comfort Guides
Important for Buckling Children
in
Child Restraints
Using the Built-In Child Restraint
How to Use Child Restraints
Child Restraint Top Straps
How to Obtain a Safety Belt Extender
Checking Your Restraint Systems
Replacing Parts After
a Crash
ProCarManuals.com

Seats and Seat Controls
This section tells you about the seats -- how to adjust
them, take them out,
put them back in, and fold &
unfold them.
Driver’s 4-way Manual Seat
Use the lever on the front left side of the seat to adjust the
seat forward or backward. Pull
up the lever on the front of
the seat
to unlock it. Slide the seat to where you want it.
To make sure the seat is locked into place, release the
lever and
try to move the seat with your body.
To raise the scat, pull up on the lever on the front right
side
of the seat. To lower the seat, push the lever down.
You can lose control of the vehicle if you try to
adjust
a manual driver’s seat while the vehicle is
moving. The sudden movement could startle and
confuse you,
or make you push a pedal when you
don’t want to. Adjust the driver’s seat only when
the vehicle
is not moving.
ProCarManuals.com

6-Way Power Seats (Option) Folding Driver’s Seatback
To adjust the six-way power seat:
Front Control (A): Raise the front of the seat by
holding the switch up. Hold the switch down to lower
the front
of the seat.
Center Control (B): Move the seat forward or backward
by holding the control to
the front or back. Raise or lower
the seat by holding
the control up or down.
Rear Control (C): Raise the rear of the seat by holding
the switch up. Hold the switch down to lower the rear of
the seat. The seatback
on the driver’s seat folds forward to put
items behind
the seat. Lift the lever and fold the
seatback forward. The seatback will lock into place
when you push
it back to the upright position.
1-3
ProCarManuals.com

Manual Front Passenger Seats
To use, pull up the lever on
the front
of the seat to
unlock it.
Slide the seat to where you want it.
To make sure the
seat is locked into place, release the lever and try to
move the seat with your body.
Reclining Front and Captain’s Chair
Seatbacks
All front seats recline.
To adjust the seatback,
rotate this knob. It is easier
to recline the seat if you
lean forward, taking your
weight off the seatback.
1-4
ProCarManuals.com

Manual Lumbar Control
Turn the knob on the
outboard side of the
seat to adjust the lower
back support.
Head Restraints
Slide the head restraint up or down so that the top of the
restraint is closest to the top
of your ears. This position
reduces the chance
of a neck injury in a crash.
Rear Seats
Seat Controls
The rear seats in your vehicle have levers and straps
used to adjust, remove and replace the seats.
By using
the levers and straps, in
the correct order, you can easily
remove the seats from your vehicle. When
you replace the seats in the vehicle, be sure to
follow the label on the back
of the seat for proper location.
Follow
hs diagram when the text in this manual tells you
what sets of floor cups to use for each seat.
l
El
H
9
0 I
I
0
J
1-6
ProCarManuals.com

Second Row Safety Belt Stowage
If your vehicle has seats in the third row, there is a
sleeve on the second row outside safety belt to store the
safety belt while entering and exiting the third row of
the vehicle.
If your vehicle has a bench seat
in the second row,
follow this procedure:
Pull the belt out and slide the sleeve along the belt
until it reaches the patch of Velcro@ on the roof.
Simply press the sleeve against the Velcro patch to
secure it in place.
Do not have the second row outside safety belt stored if
someone
is sitting in the second row outside position. The
safety belt would not protect
the passenger correctly.
To release the second row outside safety belt, just pull
the sleeve away from the Velcro patch and use the safety
belt as usual. The sleeve should slide freely when not
in use.
~nere is
also a clip on the safety belt used to secure the
belt after it is disconnected from the mini-buckle. When
removing the second row bench seat, secure the loose end of the safety belt
in this clip. This will keep the safety belt
from dangling and possible striking something.
Dump and Stow Feature
The rear seats in your vehicle, except the Captain’s
chairs, can be folded forward. Use this feature for
exiting and entering third row seats.
Push adjustable head restraints
fully down. Fold the
seatback
flat on the seat. If the seat adjusts, slide it all the
way back. Release the rear set of hooks from the floor
pins; hang on to the straps as the seat folds forward.
1-7
ProCarManuals.com

Solid Bench Seat
If you have a solid bench seat, the seatback can be
folded down. The seat can also be folded forward or
removed to provide extra storage space.
Second Row Solid Bench Seats
Folding the Seatback
To fold down the seatback,
' pull the nylon strap on the
back of the seat.
To raise the seatback, pull the nylon strap on the back of
the seat while raising the seatback
until it locks upright.
Push and pull on the seatback to check that
it is locked.
Removing the Second Row Solid Bench Seat
With the seatback in the upright position, unhook the
side attachment for the safety belt. This mini-buckle
is
located on the right side of the seat.
Push up
the red center on
the buckle with a small
pointed object like a key
or pen.
1. Pull the nylon strap on the back of the seat to fold
the seatback forward.
1-8
ProCarManuals.com

Third Row Solid Bench Seats
Folding the Seatback
To fold down the seatback, pull the nylon strap on the
back
of the seat.
To raise the seatback, pull
the nylon strap while
raising the seatback until it
locks upright.
Adjusting the Third Row Solid Bench Seat
I
Push and pull on the seatback to check that it is locked.
1-13
ProCarManuals.com

,A LAUTION:
c-- 1
A seat that isn’t locked into place properly can
move around in
a collision or sudden stop. People
in the vehicle could be injured. Be sure to lock
the seat into place properly when installing it.
7. Pull the nylon strap on the back of the seat and raise
the seatback
until it locks upright.
8. Push and pull on the seatback to check that it is
locked into place.
If
the seatback isn’t locked, it could move
forward in a sudden stop
or crash. That could
cause injury to the person sitting there. Always
press rearward on the seatback to be sure it
is locked.
Split Bench Seats
If you have the split bench seat (50/50 or 40/60), the
seatbacks can be folded down individually and the
sections can be removed individually. The sections can
also be adjusted forward or rearward individually.
The second row
(40/60) split bench may be equipped
with built-in child restraint(s). See “Built-In Child
Restraint”
in the Index.
Folding or Reclining the Seatbacks
To fold down the seatback on either section of the split
bench seat,
pull the nylon strap on the back of the seat or
lift up on the lever on the front of the seatback.
I Use the lever on the front
of the seatback to raise or
1 lower the seatback to the
l desired position.
1-18
ProCarManuals.com