Capacities and Specifications
The following approximate capacities are given in English and metric measurements.
Please refer to
Part D: Recommended Fluids and Lubricants on page 6-16 for more information.
I Capacities
Application Metric
English
Air Conditioning Refrigerant Systems
Front
A/C
1.0 kg 2.2 Ibs. Front and Rear A/C
0.8 kg
1.7 Ibs.
Automatic Transaxle
Pan Removal and Replacement
Complete Overhaul 7.4
quarts
10.0 quarts 7.0
L
9.5 L
AWD Automatic Transaxle
Pan Removal and Replacement
Complete Overhaul
8.7 quarts
10.8 quarts 8.3 L
10.3 L
Cooling System
With
A/C
With Rear Climate Control
9.1 L 9.6 quarts
~ ~~~~~ 11.3 L- ~ ~ 11.9 ~~ quarts
5-1 03
Part C: Periodic Maintenance
Inspections
Listed in this part are inspections and services which
should be performed at least twice a year (for instance,
each spring and fall).
You should let your dealer’s
service department or other qualified service center
do these
jobs. Make sure any necessary repairs
are completed at once.
Proper procedures to perform these services may be
found in a service manual. See
Service Publications
Ordering Information on page
7- IO.
Steering, Suspension and Front
Drive
Axle Boot and Seal Inspection
Inspect the front and rear suspension and steering
system for damaged, loose or missing parts, signs of
wear or lack of lubrication. Inspect the power steering
lines and hoses for proper hook-up, binding, leaks,
cracks, chafing, etc. Clean and then inspect the drive
axle boot seals for damage, tears or leakage. Replace
seals
if necessary.
Exhaust System Inspection
Inspect the complete exhaust system. Inspect the body
near the exhaust system. Look for broken, damaged,
missing or out-of-position parts as well as open seams,
holes, loose connections or other conditions which
could cause a heat build-up in the floor pan or could let
exhaust fumes into the vehicle. See
Engine Exhaust
on page
2-43.
Fuel System Inspection
Inspect the complete fuel system for damage or leaks.
Engine Cooling System Inspection
Inspect the hoses and have them replaced if they
are cracked, swollen or deteriorated. Inspect all pipes,
fittings and clamps; replace as needed. Clean the
outside of the radiator and air conditioning condenser.
To help ensure proper operation, a pressure test of
the cooling system and pressure cap is recommended
at least once a year.
6-1 4
