bulb OPEL ASTRA SALOON 2014 User Guide

Vehicle care173
8. Ensure that the seals are appliedto the bulb holder and fixingscrews.
9. Insert the bulb housing in the body, engaging the lug and the
ball pin in the recesses. Tighten
the fastening nuts using a wheel
bolt wrench. Attach the plug
connector. Close and engage the
flap.
Saloon 3-door
1. To change the bulbs, fold down the cover.
2. Detach plug connector from bulb holder.
3. Loosen fastening nuts with wheel bolt wrench and unscrew by hand.
Vehicle tools 3 187.

174Vehicle care
4. Detach bulb housing towards therear.
5. Remove seal from the fasteningbolt. Press the locking tabs on the
outside of the bulb holder outward and remove the bulb holder.
6. Remove and renew the bulb.
Reverse light ( 1)
Turn signal light ( 2)
Reverse light/brake light ( 3)
Reverse light ( 4)
Fog light, may be only on one side ( 5 )
7. Engage bulb holder in bulb housing, ensuring that it properly
engages.8. Ensure that the seals are applied to the bulb holder and fixing
screws.
9. Insert the bulb housing in the body, engaging the lug and the
ball pin in the recesses. Tighten
the fastening nuts using a wheel
bolt wrench. Attach the plug
connector. Close and engage the
flap.

Vehicle care175
Saloon 4-door
1. To replace bulbs, fold up cover inload compartment after twisting
the catch.
2. Release the bolts behind the cover using a conventional bolt
wrench, and remove.
3. Unscrew the three screws with a screwdriver and remove the bulb
holder. Vehicle tools 3 187.
4. Press tail lights back, holding the
bulb housing from the outside.
Remove plug from bulb carrier.

176Vehicle care
5. Press out six locking catches onthe bulb housing and remove bulb
carrier.
6. Remove and renew the bulb.
Brake light ( 1)
Reverse light ( 2)
Fog light, may be only on one side
( 3 )
Turn signal light ( 4)
Reverse light ( 5)
7. Engage bulb holder in bulb
housing. Ensure the seal is
applied correctly and the carrier
has engaged properly.
8. Attach the plug connector. Place bulb housing in body, clipping the
round- head bolts into the
recesses. Attach bulb housing to
the body with four screws. Close
cover and lock.
Station wagon, Van
1. Disengage cover by pressing retaining lugs and remove.
2. Detach plug connector from bulbholder.
3. Loosen fastening nuts and remove the bulb housing
rearwards.

Vehicle care177
4. Unscrew the three screws with ascrewdriver and remove the bulb
holder. Vehicle tools 3 187.
5. Remove and renew the bulb.
Reverse light/brake light ( 1)
Turn signal light ( 2)
Reverse light ( 3)
Fog light, may be only on one side
( 4 )
6. Engage bulb holder in bulb housing and screw in place. Insertthe bulb housing into the body andtighten the fastening nuts by
hand.
Attach the plug connector.
Close and engage the cover.
TwinTop1. Unscrew retaining nuts.
2. Remove bulb housing from outside. Disengage plug by
pressing on flap and remove from
bulb holder.
3. Detach seal from bulb holder.

178Vehicle care
4.Disengage sockets by turning and
remove. Press locking tabs on thelong sides of the bulb holder
outwards; lift bulb holder at front end and remove.5. Remove and renew the bulb.
Reverse light/brake light ( 1)
Reverse light ( 2)
Fog light, may be only on one side
( 3 )
Reverse light ( 4)
Turn signal light ( 5)
6. Insert bulb holder in bulb housing by first inserting the lug at the front
of the plug. Fold together bulb
holder, ensuring that it engages
properly. Insert sockets and
engage by turning.7. Fit seal on bulb holder. Ensure that the seal is flat in the area of
the screws.
8. Engage plug. Insert bulb housing in body, ensuring proper
positioning of the ball pins in the
recesses. Tighten the retaining
nuts.
Side turn signal lights
Have the bulbs replaced by a
workshop.

Vehicle care179Number plate light
1. Insert a screwdriver in thehousing, press to the side and
release spring.
2. Remove bulb housing downwards, taking care not to pull
on the cable.
3. Lift flap and disconnect wiring plug from bulb holder.4. Rotate bulb holder anti-clockwiseto disengage.
5. Remove bulb from holder and renew bulb.
6. Insert bulb holder in bulb housing and rotate clockwise.
7. Connect wiring plug to bulb holder.
8. Insert and engage bulb housing.

180Vehicle careInterior lightsFront courtesy light, reading
lights
1. Disengage lens, press it slightly downwards and remove at a
downward angle.
2. Remove bulb and renew.
3. Engage lens.
Rear courtesy light and reading
lights
Have bulbs replaced by a workshop.
Glovebox light, load
compartment light, foot well light
1. Prise the lamp out with a screwdriver.
2.Press bulb slightly towards spring
clip and remove.
3. Insert new bulb.
4. Install lamp.
Instrument panel
illumination
Have bulbs replaced by a workshop.

238IndexAAccessories and vehicle modifications .......................... 159
Active head restraints ...................48
Adaptive forward lighting ...101, 119
Adjustable air vents ...................130
Airbag, belt tensioners and anti- roll bars ..................................... 96
Airbag system .............................. 57
Air conditioning regular operation ................................ 131
Air conditioning system .............. 125
Air intake .................................... 131
Air vents...................................... 130
Antilock brake system ................ 146
Antilock brake system (ABS) .......98
Anti-theft alarm system ........30, 111
Anti-theft locking system .............. 30
Appearance care ........................203
Apply footbrake .......................... 101
Armrest .................................. 52, 53
Armrest storage ........................... 68
Ashtrays ....................................... 91
Automatic anti-dazzle ..................34
Automatic climate control system .................................... 126
Automatic level control ..............149
Automatic light control ...............117Automatic transmission .............136
Auxiliary heater ........................... 130
B
Battery discharge protection ......123
Battery voltage ........................... 110
Board-Info-Display .....................102
Bonnet ....................................... 161
Brake and clutch fluid .................208
Brake and clutch system .............98
Brake assist ............................... 147
Brake fluid .................................. 164
Brake light switch ....................... 110
Brakes ............................... 146, 163
Breakdown.................................. 201
Bulb replacement ....................... 166
C Capacities .................................. 224
Cargo management system ........75
Car Pass ...................................... 20
Catalytic converter .....................136
Central locking system ................25
Centre console lighting ..............122
Changing tyre and wheel size ...192
Charging system .......................... 97
Child locks ................................... 28
Child restraint installation locations ................................... 62
Child restraints with transponders 65