clock OPEL COMBO 2017 Manual user

146Vehicle care
4.Insert new bulb in reflector so that
the bulb aligns with the reflector
recess.
5. Engage wire clip and attach connector onto bulb.
6. Install protective cover.
Sidelight 1. Remove protective cover. Withdraw bulb holder from
reflector by turning anticlockwise.2. Remove bulb from socket, insert new bulb.
3. Insert bulb holder in reflector. 4. Rotate clockwise to engage.
5. Install protective cover.
Daytime running light 1. Remove protective cover.2. Withdraw bulb holder from reflector by turning anticlockwise.
3. Remove bulb from socket, insert new bulb.
4. Insert bulb holder in reflector. 5. Rotate clockwise to engage.
6. Install protective cover.
Front turn signal light 1. Remove protective cover.

Vehicle care147
2. Withdraw bulb holder fromreflector by turning anticlockwise.
3. Push bulb into holder slightly, rotate anticlockwise, remove and
renew bulb.
4. Insert bulb holder in reflector.
5. Rotate clockwise to engage.
6. Install protective cover.
Fog lights
Have bulbs replaced by a workshop.
Tail lights
1. Remove the three retaining screws.
2. Remove lamp assembly from vehicle.
3. Disengage connector plug from bulb holder.
4.Unscrew the four retaining screws
using a screwdriver. Turn bulb
holder for reverse light
anticlockwise and replace bulb.
5. Remove bulb holder and seal from lamp assembly.
6. Push bulb into socket slightly, rotate anticlockwise, remove and
renew bulb.

148Vehicle care
Brake light (1)
Turn signal light ( 2)
Tail light ( 3)
Tail light/fog light ( 4)
7. Install seal on bulb holder ensuring it is fitted correctly.
Install bulb holder in lamp
assembly ensuring that it
engages correctly. Tighten the
four retaining screws using a
screwdriver.
8. Install reverse light bulb holder and turn clockwise to tighten.
9. Engage connector plug.
10. Insert lamp assembly in body, ensuring correct positioning.
Tighten the three retaining
screws.
11. Switch on ignition, operate and check all lights.
Side turn signal lights
Have bulbs replaced by a workshop.
Centre high-mounted brake light
Have bulbs replaced by a workshop.Number plate light
Tailgate
1. Insert screwdriver as indicated by
the arrows, press to the side and
release the bulb housing.

Vehicle care149
2.Turn the bulb holder anticlockwise
to remove from the bulb housing.
Remove the bulb by pulling.
3. Replace the bulb.
4. Insert bulb holder in bulb housing and rotate clockwise
5. Install the bulb housing ensuring it
engages correctly.
Back doors
1. Insert screwdriver as indicated by
the arrows, press to the left and
release the bulb housing.
2. Press bulb slightly towards spring
clip and remove.
3. Replace the bulb.
4. Install the bulb housing ensuring it
engages correctly.
Interior lights
Front and rear courtesy light
1. Remove lens using a flat blade screwdriver.
2. Open the rear cover. 3. Renew bulb.
4. Close rear cover.
5. Reinstall lens.

162Vehicle care2. Turn the canister anticlockwise tolift it out.
3. Insert the new canister and turn it clockwise.
4. Connect the compressor air hose to the canister and fit the flexible
filler tube into its allocated space.
Wheel changing
Some vehicles are equipped with a
tyre repair kit instead of a spare wheel 3 159.
Make the following preparations and
observe the following information:
● Park the vehicle on a level, firm and non-skid surface. The front
wheels must be in the straight-
ahead position.
● Apply the parking brake and engage first or reverse gear.
● Remove the spare wheel 3 163.
● Never change more than one wheel at once.
● Use the jack only to change wheels in case of puncture, not
for seasonal winter or summer
tyre change.● The jack is maintenance-free.
● If the ground on which the vehicle
is standing is soft, a solid board
(max. 1 cm thick) should be
placed under the jack.
● No people or animals may be in the vehicle when it is jacked-up.
● Never crawl under a jacked-up vehicle.
● Do not start the vehicle when it is
raised on the jack.
● Clean wheel nuts and thread with
a clean cloth before mounting the
wheel.9 Warning
Do not grease wheel bolt, wheel
nut and wheel nut cone.
1. Disengage wheel nut caps with a screwdriver and remove. Pull off
the wheel cover using a suitable
tool.
2. Attach wheel wrench securely and loosen each wheel nut by halfa turn.

189Cigarette lighter ........................... 74
Climate control ............................. 16
Climate control systems .............105
Clock....................................... 71, 89
CNG............................................ 184
Collision damage repair ..............186
Control indicators.......................... 78
Control of the vehicle .................111
Controls ........................................ 69
Convex shape .............................. 30
Coolant and antifreeze ...............173
Cruise control ...................... 89, 127
Cupholders .................................. 60
D Danger, Warnings and Cautions ...4
Date .............................................. 89
Daytime running lights ............89, 99
Declaration of conformity ............186
Diesel particle filter ...............85, 117
Distance to next service ...............89
Door open .................................... 89
Doors ...................................... 26, 27
Drain fuel filter ............................. 88
Driver assistance systems ..........127
Driver Information Centre .............89
Driving characteristics and towing tips .............................. 135
Driving hints ................................ 111E
Eco mode (E).............................. 122
Electric adjustment ......................30
Electrical system......................... 151
Electronic climate control system 107
Electronic driving programmes ..122
Electronic Stability Control ..84, 126
Electronic Stability Control (ESC). 84
End-of-life vehicle recovery .......138
Engine compartment fuse box ...152
Engine coolant ........................... 141
Engine coolant temperature ........85
Engine coolant temperature gauge ....................................... 77
Engine data ............................... 178
Engine exhaust .......................... 117
Engine identification ...................176
Engine oil ...........140, 173, 177, 184
Engine oil pressure ......................86
ESC (Electronic Stability Control) 126
Event data recorders ..................186
Exit lighting ................................ 104
Extendable load compartment cover ................................... 62, 66
Exterior care .............................. 169
Exterior light ................................. 88
Exterior lighting ......................13, 98
Exterior mirrors ............................. 30F
Fault ........................................... 122
Fixed air vents ........................... 109
Fog light ....................................... 89
Fog lights ................................... 147
Folding front passenger seat ........38
Folding mirrors ............................. 30
Folding seats .......................... 40, 42
Front airbag system .....................51
Front fog lights ........................... 100
Front passenger seat Folding ...................................... 38
Table position ............................ 38
Front seats.................................... 36
Front storage ................................ 60
Front turn signal light ..................145
Fuel............................................. 131
Fuel consumption .........................89
Fuel consumption - CO 2-
Emissions ............................... 134
Fuel cut-off system .........80, 95, 113
Fuel for diesel engines ..............131
Fuel for natural gas operation ...131
Fuel for petrol engines ...............131
Fuel gauge ................................... 76
Fuel selector ................................ 76
Fuel system messages .........95, 113
Fuel tank ..................................... 184
Fuses ......................................... 151