jump cable OPEL CORSA 2009 Owners Manual

192 Self-help, vehicle care
Picture no: 17229t.tif
zNever expose the battery to naked
flames or sparks.
z A flat battery can fr eeze at temperatures
around 0 C. Defrost the battery before
connecting up jump leads.
z Do not allow battery fluid to come into
contact with eyes, skin, fabrics or
painted surfaces. The fluid contains
sulphuric acid which can cause injuries
and damage in the event of direct
contact.
z Wear eye protection and protective
clothing when handling a battery. z
Use a booster battery with the same
voltage (12 volts). Its capacity (Ah) must
not be much less than that of the
discharged battery.
z Use jump leads with insulated terminals
and a cross section of at least 16 mm
2
(25 mm
2 for diesel engines).
z Do not disconnect the discharged
battery from the vehicle.
z Switch off all unnecessary electrical
consumers.
z Do not lean over the battery during jump
starting.
z Do not allow the terminals of one lead to
touch those of the other lead.
z The vehicles must not come into contact
with each other during the jump starting
process.
z Apply hand brake. Manual transmission
or manual transmission automated 3 in
neutral, automati c transmission 3 in P.
Picture no: 18270s.tif
Lead connection order:
1. Connect the red lead to the positive
terminal 1 of the booster battery.
2. Connect the other end of the red cable to the positive terminal 2 on the flat
battery. The positive terminal has a
cover cap on it Undo the cap to access
the positive terminal.
3. Connect the black lead to the negative terminal 3 of the booster battery.
4. Connect the other end of the black lead 4
to a vehicle grounding point, such as the
engine block or a screw connection in the
engine suspension. Co nnect as far away
from the discharged battery as possible.
Back to overview