transmission oil OPEL CORSA E 2019 Manual user
[x] Cancel search | Manufacturer: OPEL, Model Year: 2019, Model line: CORSA E, Model: OPEL CORSA E 2019Pages: 231, PDF Size: 6.87 MB
Page 20 of 231

18In briefTransmission
Manual transmission
Reverse: with the vehicle stationary,
depress clutch pedal and press the release button on the selector lever
and engage the gear.
If the gear does not engage, set the
lever to neutral, release the clutch
pedal and depress again; then repeat
gear selection.
Manual transmission 3 130.
Automatic transmissionP:parkR:reverseN:neutralD:driveM:manual mode<:press to upshift in manual mode]:press to downshift in manual
mode
The selector lever can only be moved out of P when the ignition is on and
the brake pedal is applied. To engage
P or R, press the release button.
Automatic transmission 3 127.
Starting off
Check before starting off ● Tyre pressure 3 179 and
condition 3 214.
● Engine oil level and fluid levels 3 159.
● All windows, mirrors, exterior lighting and number plates are
free from dirt, snow and ice and
are operational.
● Proper position of mirrors 3 29,
seats 3 35 and seat belts
3 40.
● Brake function at low speed, particularly if the brakes are wet.
Page 93 of 231

Instruments and controls91No.Vehicle message59Open then close driver window60Open then close front
passenger window65Theft attempted66Service anti-theft alarm system67Service steering wheel lock68Service power steering75Service air conditioning79Top up engine oil81Service transmission82Change engine oil soon84Engine power reduced89Service vehicle soon90Service brake assist94Shift to park before exiting95Service airbag128Bonnet openNo.Vehicle message134Parking assist fault, clean
bumper136Service parking assist145Check washer fluid level151Press clutch to start174Low vehicle battery258Parking assist off
Vehicle messages on Uplevel
display
The vehicle messages are displayed as text. Follow the instructions given
in the messages.
Vehicle messages on
Colour Info Display
Some important messages appear
additionally in the
Colour Info Display. Some messages
only pop-up for a few seconds.
Warning chimes
If several warnings appear at the same time, only one warning chime
will sound.
When starting the engine or whilst driving
The warning chime regarding
unfastened seat belts has priority
over any other warning chime.
● If seat belt is not fastened.
● If a door or the tailgate is not fully
closed when starting off.
● If a certain speed is exceeded with parking brake applied.
● If a programmed speed is exceeded.
● If a warning message appears in the Driver Information Centre orInfo Display.
● If the parking assist detects an object.
● If unintended lane change occurs.
● If the exhaust filter has reached the maximum filling level.
Page 123 of 231

Driving and operating121Steering wheel lockRemove key from ignition switch and
turn steering wheel until it engages.
Retained power off The following electronic systems are
operable until the driver's door is
opened or at the latest for
10 minutes after the ignition is
switched off:
● power windows
● power outlets
Starting the engineTurn key to position 1 to release the
steering wheel lock.
Manual transmission: operate clutch
and brake pedal.
Automatic transmission: operate
brake pedal and move selector lever
to P or N.
Do not operate the accelerator pedal. Turn key briefly to position 3 and
release: an automatic procedure operates the starter after a brief
delay, until the engine is running. See
'Automatic Starter Control'.
Before restarting or to switch off the
engine, turn the key back to position
0 .
During an Autostop, the engine can
be started by depressing the clutch
pedal.
Starting the vehicle at low
temperatures
Petrol engines
The start of the engine without
additional heaters is possible down to -30 °C.Required is an engine oil with the
correct viscosity, the correct fuel,
performed services and a sufficiently
charged vehicle battery.
With temperatures below -30 °C, the
automatic transmission requires a
warming phase of approx. 5 minutes.
The selector lever must be in position
P .
Automatic starter control This function controls the engine
starting procedure. The driver does
not need to hold the key in position 3.
Once applied, the system will go on starting automatically until the engine
is running. Because of the checking
procedure, the engine starts running
after a short delay.
Possible reasons for a non-starting
engine:
● clutch pedal not operated (manual transmission)
● brake pedal not operated or selector lever not in P or N
(automatic transmission)
● timeout occurred
Page 228 of 231

226I
Identification plate .....................206
Ignition switch positions .............120
Immobiliser ............................ 28, 82
Indicators ...................................... 71
Info Display ................................... 88
Information displays...................... 83
Instrument cluster ........................71
Instrument panel fuse box .........175
Instrument panel illumination control .................................... 106
Instrument panel overview ........... 10
Interior care ............................... 200
Interior lighting ............................ 106
Interior lights ...................... 106, 172
Interior mirrors .............................. 30
Interruption of power supply ......129
Introduction .................................... 3
J
Jump starting ............................. 195
K
Key, memorised settings ..............23
Keys ............................................. 21
Keys, locks ................................... 21
L
Lane departure warning .......80, 149
Lashing eyes ............................... 60
Light switch ................................ 100Load compartment ................26, 57
Load compartment cover .............59
Loading information .....................61
Low fuel ....................................... 82
LPG ...................................... 73, 152
M
Malfunction indicator light ............79
Manual anti-dazzle ......................30
Manual mode ............................. 128
Manual transmission .................. 130
Manual windows ..........................31
Memorised settings ......................23
Midlevel display ............................ 83
Mirror adjustment ........................... 8
Misted light covers .....................105
N New vehicle running-in ..............120
Number plate light .....................171
O Object detection systems ...........141
Odometer ..................................... 71
Oil, engine .......................... 203, 207
OnStar .......................................... 95
Operate pedal ............................... 80
Outside temperature ....................67
Overrun cut-off ........................... 122P
Parking ................................ 19, 124
Parking assist ......................80, 141
Parking brake ............................ 132
Parking lights ............................. 105
Particulate filter ........................... 125
Performing work ........................158
Power outlets ............................... 69
Power steering.............................. 80
Power windows ............................ 31
Puncture ..................................... 192
R Radio Frequency Identification (RFID) ..................................... 223
Radio remote control ...................22
REACH ....................................... 218
Reading lights ............................ 107
Rear floor storage cover ..............59
Rear fog light ...............82, 105, 168
Rear view camera ...................... 145
Rear window wiper and washer ..66
Recommended fluids and lubricants ........................ 203, 207
Reduced engine power ................82
Refuelling ................................... 152 Registered trademarks ...............220
Retained power off .....................121
Reversing lights .........................105
Ride control systems ..................133