steering wheel OPEL MERIVA 2009 User Guide
[x] Cancel search | Manufacturer: OPEL, Model Year: 2009, Model line: MERIVA, Model: OPEL MERIVA 2009Pages: 248, PDF Size: 4.46 MB
Page 30 of 248

24 In Brief
Picture no: 14034s.tif
Steering wheel remote control
3
The functions of the infotainment system
and the information display can be
operated with the remote control on the
steering wheel.
Steering wheel remote control 3 3 111,
Infotainment system 3111.
Picture no: 14035s.tif
Rear seat audio system
3
Twin Audio allows rear seat occupants the
choice between the audio source played on
the Infotainment system or the alternative
audio source.
Rear seat audio system 3 3 112.
Picture no: 14779s.tif
Ultrasonic parking sensors
3
When reverse gear is selected, the park
pilot switches itself on automatically.
An acoustic warning sounds when the
vehicle approaches an obstacle behind.
Ultrasonic parking sensors 3 3 150.
Page 31 of 248

25
In Brief
Picture no: 18604s.tif
Adaptive Headlight (AFL)
3
The system provides better illumination of
the road on corners and curves.
Curve lighting
The light beam pivots based on
steering wheel position and speed
(from approx. 10 km/h).
The headlamps shine at an angle of up
to 15 to the right or left of the direction of
travel.
Cornering light
An additional lamp comes on at certain
steering wheel settings (after rotation
of approx. 90), turn signal settings and
speeds (up to approx. 40 km/h).The lamp beam projects at a 90 angle to
the left or right of the vehicle up to a
distance of approx. 30 metres.
Reversing function
Turning the lights on
, selecting reverse
gear and activating the turn signal
activates the cornering light for the
relevant side. When the turn signal is
switched off, the corn ering light continues
to illuminate for 15 seconds.
Adaptive forward lighting 3 3 106.
Diesel particle filter
3
The diesel particle filter system filters
harmful soot particles out of the exhaust
gases. The system includes a self-cleaning
function that run automatically during
driving. The filter is cleaned by burning off
the soot particles at high temperature.
This process takes place automatically
under set driving conditions and may take
up to 25 minutes. Fuel consumption may
be higher during this period. The emission
of smells and smoke during this process is
normal.
Picture no: 18600S.tif
Under certain driving conditions, e.g. short
journeys, the system may not clean itself
automatically.
If the filter requires cleaning and previous
driving conditions did not enable
automatic cleaning, control indicator !
flashes.
Further instructions 3144.
Page 52 of 248

46 Seats, InteriorzSit with your shoulders as far back
against the backrest as possible. Set the
backrest rake so that you can easily
reach the steering wheel with your arms
slightly bent. Mainta in contact between
your shoulders and the backrest when
turning the steering wheel. Do not angle
the backrest too far back. We
recommend a maximum rake of
approx. 25.
z Adjust the steering wheel 35.
z Set seat height 3 high enough to have a
clear field of vision on all sides and of all
display instruments. There should be at
least six inches of clearance between
your head and the headlining. Your
thighs should rest lightly on the seat
without pressing into it.
z Adjust the head restraint.
z Adjust the height of the seat belt 362.
z Adjust the lumbar support 3 so that it
supports the natural shape of the spine.
Picture no: 14153s.tif
Heated front seats 3
Two buttons between the centre air vents
for the left and right seats.
To heat with the ignition switched on, press
button ß.
Picture no: 13980s.tif
Head restraints Adjusting the front head restraints and
the rear outboard head restraints 3
Tip head restraint forw ard, hold and adjust
height.
To fold over the rear seats or lower the
front passenger seat head restraint all the
way down and remove, see next page.
With the seats occupi ed, adjust height
according to body size.
Page 73 of 248

67
Seats, Interior
Picture no: 16424s.tif
Airbag system Front airbag
The front airbag system consists of one
airbag in the steering wheel and one in the
instrument panel. These can be identified
by the word AIRBAG.
The front airbag system comprises:
z an airbag with inflator in the steering
wheel and a second one in the
instrument panel 3,
z the control electronics with impact
sensor,
z the control indicator for airbag
systems v in the instrument,
Picture no: 14317s.tif
z seat occupancy recognition 3,
z the control indicator for Opel child
restraint systems
y
with transponders 3
in the courtesy lamp.
The front airbag system will be triggered:
z depending on the severity of the
accident,
z depending on the type of impact,
z within the range show n in the illustration,
z independently of the side airbag
system 3 and curtain airbag system 3.
The ignition must be switched on. Exception:
Passenger seat with a seat occupancy
recognition system
3. The occupancy
recognition system deactivates the front
and side airbags for the passenger when
the seat is unoccupied or an Opel child
restraint system with transponders 3 is
fitted to the passenger seat. Seat
occupancy recognition 372. Opel child
restraint system with transponders 3 3 73.
Examples of events triggering the front
airbag system:
z Impact against a non-yielding obstacle:
the front airbags are triggered at low
vehicle speed.
z Impact against a yielding obstacle (such
as another vehicle): the front airbags are
only triggered at a higher vehicle speed.
Page 80 of 248

74 Seats, InteriorIf the control indicator flashes when the
child restraint system with transponders 3
is correctly fitted, there is a fault with risk of
injury to the child. Fit child restraint systems
on the rear seat. Have the cause of the
fault eliminated by a workshop.
If no Opel child restraint system with
transponders 3 is fitted, the control
indicator must not light or flash as the
passenger airbag systems would not
deploy. Have the cause of the fault
eliminated by a workshop. Important
z
Placing accessories and objects in the
expansion region of the airbag systems
is not permitted due to the risk of injury if
the airbag is triggered.
z Do not place any objects between the
airbag systems and the vehicle
occupants; danger of injury.
z Use the hooks in the roof frame only to
hang up light articles of clothing or coat
hangers. Do not place any objects in the
pockets of the hanging items – risk of
injury.
z The airbag systems and belt tensioner
control electronics can be found in the
centre console area. In order to avoid
malfunctions, do not store magnetic
objects in this area. z
Do not stick anything on the steering
wheel, instrument panel, front seat
backrests or roof frame in the vicinity of
the airbags, or on the front passenger’s
seat cushion, or cover any of those areas
with other materials.
z Use only a dry cloth or interior cleaner to
clean the steering wheel, instrument
panel, front seat backrests, roof frame
and seat cushion of the front passenger
seat. Do not use any aggressive cleaning
agents.
z Only protective covers which are
approved for your vehicle with side
airbag may be fitted on the front seats.
When fitting the protective covers, make
sure that the airbag units on the
outboard sides of the front seat
backrests are not covered.
z The airbag systems are triggered
independently of each other depending
on the severity of the accident and the
type of impact. The side airbag system 3
and the curtain airbag system 3 are
triggered together.
z Each airbag deploys once only. Have a
workshop replace deployed airbags
immediately.
9 Warning
If the Opel child restraint system with
transponders 3 has been fitted
according to the inst ructions, the control
indicator for Opel restraint systems with
transponders must illuminate in the
courtesy lamp when the ignition is
switched on.
If the control indicator does not come on
while driving, the passenger airbag
systems are not de-activated and there
is a risk of injury or death. In this case fit
child restraint system s on the rear seat.
Have the cause of th e fault eliminated
by a workshop.
9 Warning
As with any other ob ject, child restraint
systems must not be carried on a
passenger’s lap. Danger to life.
Page 81 of 248

75
Seats, Interior
zThe speeds, directions of movement and
deformation properties of the vehicles,
and the properties of the obstacle
concerned, determine the severity of the
accident and triggering of the airbags.
The degree of damage to your vehicle
and the resulting repair costs alone are
not indicative that the criteria for
triggering of the airbags were met.
z Do not perform any alterations on the
components of the airbag system, as this
would render the vehicle unroadworthy.
z We recommend having the steering
wheel, the instrument panel, all panelling
parts, the door seals, the handles and
the seats removed by a workshop. z
The applicable safety regulations must
be adhered to when the vehicle is
disposed of. The vehicle should therefore
be disposed of by a recycling company.
z Persons weighing less than 35 kg should
only travel on the rear seats. This does
not apply to children who are travelling
in child restraint systems with
transponders 3.
z In vehicles with seat occupancy
recognition 3, do not place any heavy
objects on the front passenger seat
otherwise the airbag systems for the
front passenger seat may be triggered in
the event of an accident.
z In vehicles with seat occupancy
recognition 3, to prevent malfunctions
do not use protective covers or seat
cushions on the front passenger seat. z
When using an Opel child restraint
system with transponders 3 on the front
passenger seat, in order to prevent
malfunctions, no objects (e.g. plastic
sheet, stickers or heated mats) may be
placed under the child restraint system.
9 Warning
If handled improperly the airbag
systems can be triggered in an explosive
manner – risk of injury!
9 Warning
Child restraint system s or other objects
must never be carried on the laps of
passengers; If carried in this way, child
restraint systems with transponders 3 in
vehicles with seat occupancy
recognition 3 could lead to front
passenger airbag systems not being
triggered in the event of an accident.
Page 90 of 248

84 Instruments, Controls
Picture no: 17876s.tif
I
Engine oil pressure
Control indicator lights up red
It illuminates when the ignition is switched
on and goes out shortly after the engine
starts.
Illuminates when the engine is running
1. Depress clutch.
2. Move gearshift lever to neutral, or with
manual transmissi on automated 3 place
selector lever in N.
Picture no:
3. Move out of the flow of traffic as quickly
as possible without impeding other
vehicles.
4. Switch off ignition.
Contact a workshop for assistance.
Caution
Engine lubrication may be interrupted.
This may result in damage to the engine
and/or locking of the drive wheels.
9 Warning
When the engine is off, considerably
more force is needed to brake and steer.
Do not remove key until vehicle has
come to a standstill, otherwise the
steering column lock could engage
unexpectedly.
O
Turn signal lamps
Control indicator flashes green.
The control indicator flashes if a turn signal
or the hazard warning flashers are
activated.
Rapid flashing: failure of a direction
indicator lamp or associated fuse.
Change bulbs 3 185. Fuses 3182.
C
Main beam
Control indicator lights up blue.
It is illuminated when main beam is on and
during headlamp flash 311, 3102.
j
Automatic transmission 3, start engine.
Control indicator lights up yellow.
The engine can only be started if the foot
brake is depressed. If the foot brake is not
depressed, the control indicator illuminates
3 130.
Page 98 of 248

92 Instruments, Controls
Picture no: 17914s.tif
Triple information display Set date and time
The infotainment system 3 must be off.
Activate setting mode by holding the Ö
button depressed for about 2 seconds. The
flashing value is adjusted using the ;
button. The Ö button is used to switch to
the next unit and to exit setting mode. Automatic time synchronisation
3
The RDS signal of most VHF transmitters
automatically sets the time. This can be
identified by } in the display.
Some transmitters do not send a correct
time signal. In such cases, we recommend
that you switch off automatic time
synchronisation.
Activate setting mode and set it to year
setting. Hold the Ö button depressed
about 3 seconds until } flashes in the
display and “RDS TIME" appears. The
function is activated (RDS TIME 1) or
deactivated (RDS TIME 0) with the ;
button. Exit setting mode using the Ö
button.
Picture no: 16711t.tif
Graphical information display
3
or colour information display
3,
selecting functions
Functions and their menus are depicted in
the graphical information display and
colour information display.
These functions are marked or executed in
the menu display via the cross switch, the
multifunction knob 3 on the Infotainment
System or buttons 3 on the steering wheel.
8:56
5
,5
°C
07.04.2004
FM AS [TP] REG CDinMP3
90.6
MHz
19,5° 19:36
Page 99 of 248

93
Instruments, Controls
Picture no: 15593t.tif
To select with four-way button
Select menu items via menus and with the
buttons/four-way button of the
Infotainment system.
Picture no: 15559t.tif
Selection with the multifunction knob 3
Turn the multifunction button to highlight
menu items or commands and to select
function areas.
Press the multifunction button to select the
highlighted item or confirm a command.
To exit a menu, turn the multifunction
button left or right to Return or Main and
select.
Picture no: 14034s.tif
Selection using buttons 3 on steering
wheel
Select menu options via menus and with
the buttons.
Page 103 of 248

97
Instruments, Controls
Picture no: 16719t.tif
Graphical information display
3
or Colour information display 3,
Trip computer
3
The trip computers provide information on
driving data, which is continually recorded
and evaluated electronically.
The trip computer main page provides
information on range, average
consumption and momentary
consumption 3.
To display the other trip computer driving
information, press BC button on
Infotainment system 3 or select trip
computer menu on display.
For vehicles with Infotainment System
CD 30 3 and steering wheel remove
control 3, the left steering wheel buttons
only operate the trip computer.
Picture no: 16710t.tif
Range
Range is calculated fr om current fuel tank
content and instantaneous consumption.
The display shows average values.
After refuelling, the vehicle updates the
range automatically after a brief delay.
Picture no: 16718t.tif
If the fuel in the tank will allow less than
50 km of travel, the message Range
appears in the display.
If the fuel in the tank will allow less than
30 km of travel, the message
Please refuel! 3 appears in the display.
Acknowledge warning message 392.
Instantaneous consumption
Display of current consumption. At low
speeds, consumption per hour is displayed.
Ü
Board Computer 19,5° 19:36
BC 1 All values
BC 2
257.0
km
Timer
Ø40
km/h
31.0
Ltr.
Ø
7.0
Ltr./100km
1
8
Range
257
km
Aver. Consump.
7.0
Ltr./100km
Inst. Consumpt.
7.6
Ltr./100km
19,5° 19:36
Range33km
OK