Interior OPEL MERIVA 2009 Service Manual

75
Seats, Interior
zThe speeds, directions of movement and
deformation properties of the vehicles,
and the properties of the obstacle
concerned, determine the severity of the
accident and triggering of the airbags.
The degree of damage to your vehicle
and the resulting repair costs alone are
not indicative that the criteria for
triggering of the airbags were met.
z Do not perform any alterations on the
components of the airbag system, as this
would render the vehicle unroadworthy.
z We recommend having the steering
wheel, the instrument panel, all panelling
parts, the door seals, the handles and
the seats removed by a workshop. z
The applicable safety regulations must
be adhered to when the vehicle is
disposed of. The vehicle should therefore
be disposed of by a recycling company.
z Persons weighing less than 35 kg should
only travel on the rear seats. This does
not apply to children who are travelling
in child restraint systems with
transponders 3.
z In vehicles with seat occupancy
recognition 3, do not place any heavy
objects on the front passenger seat
otherwise the airbag systems for the
front passenger seat may be triggered in
the event of an accident.
z In vehicles with seat occupancy
recognition 3, to prevent malfunctions
do not use protective covers or seat
cushions on the front passenger seat. z
When using an Opel child restraint
system with transponders 3 on the front
passenger seat, in order to prevent
malfunctions, no objects (e.g. plastic
sheet, stickers or heated mats) may be
placed under the child restraint system.
9 Warning
If handled improperly the airbag
systems can be triggered in an explosive
manner – risk of injury!
9 Warning
Child restraint system s or other objects
must never be carried on the laps of
passengers; If carried in this way, child
restraint systems with transponders 3 in
vehicles with seat occupancy
recognition 3 could lead to front
passenger airbag systems not being
triggered in the event of an accident.

76 Seats, InteriorUse of child restraint systems 3 on the
front passenger seat in vehicles with
airbag systems 3, but without seat
occupancy recognition 3
Picture no: 11704a.tif
Vehicles with front passenger airbag can
be recognised by the word AIRBAG above
the glove compartment and by the sticker
on the instrument panel on the passenger
side - see Fig. 11704 A.
Picture no: 14791s.tif
A vehicle with side airbags can be
identified by the word AIRBAG on the
outboard sides of the front seat backrests.
Seat occupancy recognition 3 372.
9 Warning
Vehicles with fron t passenger airbag 3
without side airbag 3: Child seats facing
the rear of the vehicle must not be
installed on the front passenger seat,
risk of fatal injury. Child seats facing the
direction of travel (child seats for weight
classes I, II and III, following pages) may
be installed on the front passenger seat
if the seat has been pushed back as far
as it will go and the backrest has been
adjusted such that the lap belt fits
snugly.
9 Warning
Vehicles with side airbag 3: No child
restraint system 3 may be fitted on the
front passenger’s seat; risk of fatal
injury.

77
Seats, Interior
Picture no: 15844t.tif
Use of child restraint systems 3 on front
passenger seat in vehicles with airbag
systems 3 and with seat occupancy
recognition 3
Vehicles with seat occupancy recognition
are identified by a sticker on the lower
panel of the front passenger seat –
see Fig. above.
Picture no: 12097s.tif
Vehicles with seat occupancy recognition
can also be recognised by control
indicator
y. If control indicator
y
illuminates for approx. 4 seconds after the
ignition is switched on, the vehicle is
equipped with seat occupancy recognition
3 72. The seat occupancy recognition system
detects Opel child restraint systems with
transponders
3 and switches off the front
and side airbag sy stems for the front
passenger seat. The curtain airbag system
remains activated. Seat occupancy
recognition 3 72.
Opel child restraint systems with
transponders 3 can be identified by a
sticker or badge.
9 Warning
Only Opel child restraint systems with
transponders 3 can be fitted on the
front passenger seats. Use of systems
without transponders poses a risk of
fatal injury.

78 Seats, Interior
Picture no: 14111s.tif
Cigarette lighter
3
The cigarette lighter is behind the ashtray
cover in the centre console.
The ashtray cover opens when pressed at
the point indicated.
Press cigarette lighter with ignition
switched on. Switches off automatically
when element is hot. Withdraw cigarette
lighter.
Picture no: 16111s.tif
Accessory sockets
3
The accessory socket is behind the cover in
the centre console. Further accessory
sockets3 are located in the centre console
in front of the rear seats and in the luggage
compartment.
Accessory sockets are operable when the
ignition is switched on. Use of the sockets
while the engine is no t running will drain
the battery. Do not exceed the maximum power
consumption of 120 watts.
Electrical accessories connected to the
socket must comply with the
electromagnetic compatibility
requirements laid down in DIN VDE 40 839,
otherwise vehicle malfunctions may occur.
Do not connect any current-delivering
accessories, e.g. el
ectrical charging
devices or batteries.
If the tyre repair set is 3 is in operation, no
consumers may be connected to the
auxiliary socket.
Caution
Do not damage the socket by using
unsuitable plugs.

79
Seats, Interior
Picture no: 14111s.tif
Ashtrays Ashtray, front
The ashtray is behind a cover in the centre
console.
The cover opens when pressed at the point
indicated.
Picture no: 16110s.tif
To empty, grip both sides of the ashtray
insert at the spots illustrated and pull
upwards.
Picture no: 14114s.tif
Rear ashtray 3
The ashtray is in the rear centre console.
To open, pull ashtray towards the back of
the vehicle.
To empty: open the ashtray, press the
spring (arrow) and pull out the ashtray.
Caution
To be used only for ash and not for
combustible rubbish.

80 Seats, Interior
Picture no: 17884s.tif
Ashtray 3
The ashtray can be put in the front or rear
of the centre console or in the oddments
tray 3.
To use, open cover.
Picture no: 11699s.tif
Stowage compartments Stowage compartment 3 beneath
passenger seat
Lift stowage compartment by grasping
recessed edge and pull out. Maximum
load: 1 kg. To close the stowage
compartment, push it in and engage.
Picture no: 14115s.tif
Glove compartment
To open, pull handle upwards.
On the inside of the glove compartment
cover there is a pen holder.
The glove compartment should remain
closed while driving.

81
Seats, Interior
Picture no: 11701s.tif
Stowage compartment for glasses 3
On driver’s side: fold down to open.
Do not store heavy objects in the stowage
compartment.
Picture no: 18601s.tif
Foldaway tables
3
These are located in the front seat
backrests.
Open by pulling upward until it engages.
Fold away by pressing down past the
resistance point.
Do not place any heavy objects on the
table.
Picture no: 14116s.tif
Coin holder
3
In the centre console. Sun visors Use the sun visor to protect from glare by
pulling it down and swivelling it to the side.
The mirror covers in the sun visors should
be closed while driving.

108 LightingTo activate the lead-me-to-the-car light
function, press button q on the remote
control twice with the vehicle locked.
Country-specific version 3: to enable the
lead-me-to-the-car function, press
button q on the remote control once with
the vehicle locked.
The lead-me-to-the-car light function is
deactivated immediately by pressing
button p of the remote control or
switching on the ignition.
Picture no: 14759s.tif
Instrument illumination
k,
Information display illumination
Lights come on when ignition is switched on.
Brightness can be adjusted when the
exterior lights are on: Push to release knob
k and then turn it clockwise or
anticlockwise and hold until the desired
brightness is obtained.
Display mode 3 396.
Picture no: 14136s.tif
Courtesy lamp Automatic interior light
Comes on automatically when the vehicle is
unlocked with the radi o remote control or
when a door is opened.
Goes off automatically after a delay when
the doors are closed or immediately when
the ignition is switched on or the doors are
locked.
Front courtesy lamp
To operate manually from inside when the
doors are closed: on = Press light switch 0
off = Press light switch 0 again

109
Lighting
Picture no: 11607s.tif
Front reading lamps 3
Operate using buttons with the ignition
switched on.
Picture no: 12344t.tif
Courtesy lamps and rear reading lamps 3
Centre switch position: The rear courtesy
lamp comes on together with the front one
when a door is opened.
The rear reading lamps on the left and
right can be switched on separately. With
ignition on: Entry lighting
3
After unlocking the vehicle, the instrument
and switch illumination plus the courtesy
lamps come on for a few seconds.
Illuminated mirror in the sun visors 3
The lighting switches on when the cover is
opened.
Glove compartment lighting 3
The glove compartment light comes on
when the ignition is on and the lid is
opened.
Luggage compartment lighting 3
The luggage compartment light comes on
when the tailgate is open.
Automatically regulated centre console
lighting 3
Spotlight in housing of interior mirror.
Daylight-dependent, automatically
regulated centre console lighting with
ignition switched on. On = Switch position I
Off = Switch position 0

110 LightingBattery discharge protection
3
Some consumers such as the interior
lighting switch themselves off after
approx. 30 minutes if the ignition is off in
order to protect the battery charge. Misted light covers The inside of the light covers may mist up
briefly in poor, wet and cold weather
conditions, in heavy rain or after washing.
The mist disappears quickly by itself; to
help, switch on the lights. Headlamps when driving abroad The asymmetrical dipped beam increases
the field of vision on the passenger side of
the lane.
In countries where traffic drives on the
opposite side of the road, prevent glare as
follows.
Vehicles with halogen headlamp system
or Xenon headlamp system 3
Have headlights conver ted in a workshop.
Picture no: 14053h.tif
Vehicles with Adaptive headlight 3 (AFL)
1. Pull stalk towards steering wheel and hold.
2. Switch on ignition.
3. After approx. 3 seconds, an acoustic signal sounds and then AFL control
indicator
B flashes approx. 4 seconds.
After the switch, AFL control indicator
B
flashes for 4 seconds each time the ignition
is switched on. To return to asymmetrical dipped beam,
pull and hold the main beam stalk again,
switch on the ignition and wait for the
acoustic signal. AFL control indicator
B
will then discontinue flashing.
Control indicator
B
3 106.