jacking points PEUGEOT 106 2001.5 Owners Manual

Special procedure for Sport model Positioning the jack ÐClose the jack completely.
Ð Position the jack under the vehicle at the jacking points tilting it by 90¡, so that the jack handle hinge is at the same height as the sill trim, then straighten it.
Ð Check that the jack is in correct contact with the sill.
Replacing the wheel in the carrier Ð Position the jack storage box with the arrow pointing forwards.
PRACTICAL INFORMATION8181
For your safety, always change a wheel:
Ð on level, solid, non-slipperyground,
Ð with the handbrake applied,
Ð
with Þrst or reverse gear engaged,
Ð Chock the vehicle.
Ð Never position yourself undera vehicle which is supportedonly by a jack. Use a ramp.
After changing the wheel Ð Have the wheel bolts and the tyre pressure checked assoon as possible.
Ð Have the damaged tyrerepaired so that it can bereturned to the vehicle assoon as possible.
Ð The Òspace-savingÓ* type ofspare wheel is Þtted with a115/70R 15 tyre and is for
temporary use only. - Pressure: 61 lbf. in 2
(4.2 bars).
- Maximum speed: 50 m.p.h. (80 km/h).
* According to speciÞcation
3
Never place the jack in contact with the sill trim.
06-05-2002