display Peugeot 208 2012 Owner's Guide

104
Driving
This system indicates the proximity of an
obstacle (person, vehicle, tree, gate, etc.) which comes within the field of detection of sensorslocated in the bumper.Certain types of obstacle (stake, roadworks cone, etc.) detected initially will no longer be detected at the end of the manoeuvre due to
the presence of blind spots.






Parking sensors


This function cannot, in any circumstances, take the place of the vigilance and responsibility of the driver.
The system is switched on by engaging reverse
gear. This is accompanied by an audible signal.
The system is switched off when you exit reverse gear.


Rear parking sensors


Audible assistance

The proximity information is given by an
intermittent audible signal, the frequency of which
increases as the vehicle approaches the obstacle.
The sound emitted b
y the speaker (right or left) indicates the side on which the obstacle is located.

When the distance between the vehicle andthe obstacle becomes less than approximatelythirty centimetres, the audible signal becomes continuous.



Visual assistance
This supplements the audible signal bydisplaying bars in the multifunction screen
which move progressively nearer to the vehicle.
When the obstacle is near, the "Danger"symbol is also displayed in the screen.

105
4
Driving
that the sensors are not covered with mud, ice or snow. When reverse gear isengaged, an audible signal (long beep)indicates that the sensors may be dirty. When the vehicle is moving at a speed below 6 mph (10 km/h), cer tain soundsources (motorcycle, lorry, pneumatic
drill, etc.) may trigger the audible signals of the parking sensor system.
In th
e event of a malfunction of
the system, when reverse gear
is en
gaged this warning lamp
is displayed in the instrument panel and/or a
message appears in the screen, accompanied
by an audible signal (short beep).
Contact a PEUGEOT dealer or a qualified
wor
kshop.

Operating fault
The function will be deactivated automatically if a trailer is being towedor a bicycle carrier is fitted (vehicle fitted with a towbar or bicycle carrier recommended by PEUGEOT).




Deactivation / Activation of the
rear parking sensors
The function is deactivated by pressing this switch. The indicator lamp in the switch comes on.
Pressing this switch again reactivates the function. The indicator lamp in the switchgoes off.

107
5
Visibility


Model without AUTO lighting



Model with AUTO lighting



Selection ring for main lighting mode

Turn the ring to position the symbol required
facing the mark.

Li
ghting off.
Automatic illumination of headlamps.


Sidelamps onl
y.

Di
pped or main beam headlamps.

Stalk for switching headlamps

Pull the stalk to switch the lighting between
dipped / main beam headlamps.

In the li
ghting off and sidelamps modes, the driver can switch on the main beam headlamps
temporaril
y ("headlamp flash") by maintaining apull on the stalk.


Displays

Illumination of the corresponding indicator lamp
in the instrument panel confirms the lighting switched on.

112
Visibility
The sidelamps and dipped beam headlamps are
switched on automatically, without any action
on the part of the driver, when a low level of external light is detected or in certain cases of activation of the windscreen wipers.
As soon as the brightness returns to a sufficient
level or after the windscreen wipers are switched
o
ff, the lamps are switched off automatically.
Automatic illumination of
headlam
ps
Switching on
)Turn the ring to the "AU TO "position.
Activation of the function is accompanied
b
y a message in the screen.

Switching off
)Turn the ring to another position. Deactivation of the function is accompanied by a message in the screen.



Automatic guide-me-home
lighting
Association with the automatic lighting provides
the guide-me-home lighting with the followingadditional options:


- selection of the lighting duration of 15, 30or 60 seconds,

- automatic activation of guide-me-home lighting when the automatic illumination of
headlamps is in operation.



Operating fault

In the event of a fault with thesunshine sensor, the lighting comes on, this warning lamp
is displayed in the instrument panel and/or a message appears in the screen, accompaniedby an audible signal.
Contact a PEUGEOT dealer or a qualified
workshop.

In fog or snow, the sunshine sensor maydetect sufficient light. In this case, the lighting will not come on automatically. Do not cover the sunshine sensor,coupled with the rain sensor and located in the centre of the windscreenbehind the rear view mirror; theassociated functions would no longer be controlled.


Programming
The duration of the guide-me-home
lighting can be set in the vehicle configuration menu.

117
5
Visibility
Automatic rain sensitive
windscreen wi
pers
The windscreen wipers operate automatically,
without an
y action on the par t of the driver, if
rain is detected (sensor behind the rear view mirror), adapting their speed to the intensity of
the rainfall.

Switching on

Briefly push the control stalkdownwards.
This warning lamp comes on in the
instrument panel and a message is
displayed.Brie
fly push the control stalk
downwards again, or place thecontrol stalk in another position(Int, 1 or 2).
This warning lamp goes off in the instrument
panel and a message is displayed.
Switching off


The automatic rain sensitive windscreenwipers must be reactivated by pushing the control stalk downwards, if theignition has been off for more than oneminute.

01
212
Press to mute the sound.
MOD
E: selection of the type
of permanent display. Volume ad
justment (each source is independent, including TA messages and navigation instructions).

Selection of the "MAIN MENU":
- "Navi
gation" for navigation settings and to select a destination (dependingon version).
- "Media" to select radio, MP3 music
(from a USB memory stick), view
photos.
- "
Communications" to connect a telephone by Bluetooth so as to make
telephone calls securely or connect to the Internet.
- "Settin
gs" to enter settings for the radio, the vehicle or audio.

Press MENU again to quit the "MAIN MENU" and return to the permanentdisplay.
Selection of the audio source
(depending on version):
- "FM"
/ "AM" radio wavebands.
- "U
SB" memory stick.
-
CD (located in the glove box)*.
- Telephone connected b
y Bluetooth and streaming.
- Media pla
yer connected to the auxiliary socket (jack, cable not supplied).


Use the zones su
ggested in the
screen using a fi nger.

To clean the screen, use
a soft non-abrasive cloth (spectacles cloth) without
any additional product.

FIRST STEPS

*
Depending on equipment.

03
214
Press MODEseveral times in succession for access to the following displays:
"Trip computer"r
(refer to the "Instrumentsand controls" section)
"Map"
(if navigation guidance in
progress)
"Radio
"
(or audio source being listened to: CD, USB,
Auxiliary)
"
Telephone"
(if call in progress)
OR
GENERAL OPERATION

217
"Navigation"

"Guide"

"Contacts"

"Address"

"Settings"

Access to the "Navigation" menu
On the map
Pr
ess an icon for additional information and menu shortcuts.
- List of recent destinations. Select an address and press
A1 "Calculate route" to start navigation.
- Press the map to display it full screen.
A2
- Display the map and zoom to view the routes.
A6
- Create, add/delete a waypoint or view the itinerary.
A7
- Choose the settings for calculation of the route.
A3
- Choose the navigation criteria: "Fastest", "Shortest", "Time/
A31 Distance compromise", "Include tollroads", "Include ferries", "Pass close to waypoints".
The map displays the route defi ned in line with the criteria.
- Display the map and start navigation.
A32
- Enter an address.
A4
- Enter the country, city, address or the longitude/latitude
A41 coordinates.
- Having chosen an address, press to calculate the route.
A42
- Choose an address.
A5
- Select a contact in the list.
A51
- Having chosen a contact, press to calculate the route.
A52
- Set your preferences.
A8
- Retain the calculation criteria in memory.
A81
- Detour from your initial route for a certain distance.
A82
- Activate risk area alerts.
A83
- Choose the volume for the voice and the announcement of street
A84 names.
- Display the mapping version.
A85

"Traffi c"

"Audio settings / Voice synthesis"
"SEARCH FOR POINTS OF INTEREST"

"TRAFFIC INFORMATION SETTINGS"
"Map heading"
"Map colour"

Access to the "Navigation" menu (continued)
- List of traffi c information messages.
B1
- Select the map or the descriptive information.
B2
- Refi ne the list of traffi c information on the route, within a radius
B3 of 30 miles (50 km) or at the destination.
- List of categories available.
C1
- Having chosen the category, select the points of interest.
C2
- Choose the volume for the voice and for announcing street B4 names.
- Set the choice of messages and the radius fi lter.B5
- Choose the map display in perspective or fl at, then NorthC3 orientation or in the direction of the vehicle (for fl at display).
- Choose map display in day, night or automatic mode (makingC4 use of the vehicle's sunshine sensor).
21
9

04
220

TOWARDS A NEW DESTINATION


CHOOSING A DESTINATION
Select "Navigation GPS
".


Select "Save
" to save the address entered as a contact entry.
The s
ystem allows up to 200 entries.
Select "Confi rm" or press the screen (blue
arrow) to start navigation guidance.
Select "Address
".


Select the " Country
" from the list offered then in the same way:
th
e " City" or its post code, the "Street",
the " N°". Confi rm each time.
Select "Guide ".


Choose the restriction criteria: "Tollroads",
" Ferries", " Near".
r

Choose the navigation criteria: " Fastest
" or the
"Shortest
" or " Time/Distance compromise".The route is displayed in the map (on the right).

To delete navi
gation information, press on
" Settings
" then " Stop navigation
".

To restore the navi
gation information press on
"Settings
" then " Restart navigation".
Press MENUto display the " MAIN MENU " then select " Navigation".
NAVIGATION - GUIDANCE