start stop button Peugeot 208 2013 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2013, Model line: 208, Model: Peugeot 208 2013Pages: 332, PDF Size: 8.4 MB
Page 19 of 332

.
17
Familiarisation
  Driving safely 
 
 
Stop & Start
 
 
Going into engine STOP mode 
93
The "ECO"warning lamp comes
on in the instrument panel and the
en
gine goes into standby: 
Going into engine START mode
   
Deactivation 
/ Reactivation
 
You can deactivate the system at any time bypressing the  "ECO OFF" 
 button; the button's
warning lamp comes on.
94
   
94  
, 95
 The system is automatically reactivated every time the engine is star ted withthe key. 
 
Before refuelling or doing anything under the bonnet, you must switch off the ignition with the key.   Th
e  "ECO" 
 warning lamp goes off 
and the engine restar ts: 
-with a manual gearbox, when you press 
the clutch pedal,-with an electronic gearbox:● 
 with the gear lever in position A 
 or  M, 
 when you release the brake pedal,
● 
  or with the gear lever in position N 
 andbrake pedal released, when you move thegear lever to position  A 
 or M,● 
 or when you engage reverse.
-with a manual gearbox 
, at speeds below
12 mph (20 km/h), when you put the gear lever into neutral, and you release theclutch pedal, 
   - 
  with an electronic gearbox 
, at speeds
below 5 mph (8 km/h), when you press the 
brake pedal or you put the gear lever into position  N . 
 
In certain circumstances, 
START mode may beinvoked automatically; the "ECO" 
 warning lamp
flashes for a few seconds, then goes off.    In certain circumstances, 
STOP mode may not 
be available; the  "ECO"warning lamp flashes 
for a few seconds, then goes off. 
Page 32 of 332

30
Instruments and controls
Warning / indicator lampStateCauseAction / Observations
Dynamic stability control(DSC/ASR)
flashing. The DSC/ASR regulation is
operating. The system optimises traction and improves the 
directional stability of the vehicle. 
fixed.Unless it has been deactivated(button pressed and its indicator lamp
on) the DSC/ASR system has a fault.Have it checked b
y a PEUGEOT or a qualified 
workshop.
Engine autodiagnosis system
fixed. The emission control system has a
fault. The warning lamp should go off when the engine is started.
If it does not go off, contact a PEUGEOT dealer or qualified 
workshop without delay. 
flashing.The engine management system hasa fault. Risk of destruction of the catalytic conver ter. 
Have it checked by a PEUGEOT dealer or a qualified 
workshop.
fixed, associated with theSERVICE warning lamp.   A minor engine fault has beendetected.Have it checked by a PEUGEOT dealer or a qualified 
workshop.
fixed, associated with 
the STOP warning 
lamp.    A ma
jor engine fault has been detected.You must stop as soon as it is safe to do so. 
Park, switch off the ignition and contact a PEUGEOT 
dealer or a qualified workshop.