weight Peugeot 208 2014 Owner's Manual - RHD (UK, Australia)

.
Direction indicators 128
Hazard warning lamps 1 28
em

ergency or assistance call
1
29
H or n


129
Tyre under-inflation detection

1
30
e

SC system
1
33
Front seat belts

1
36
Airbags


139
Child seats

1
43
Deactivating the passenger's front airbag
1

45
ISOFIX child seats

1
51
Child lock

1
55
Safety
Temporary puncture repair kit 156
Changing a wheel 1 61
Snow chains

1
68
Changing a bulb
1

69
Changing a fuse
1

76
Battery
1

82
el

ectrical energy economy mode
1
85
Changing a wiper blade
1

86
Towing the vehicle

1
87
Towing a trailer

1
89
Fitting roof bars

1
91
Advice on care and maintenance
1

92
Accessories


193
Practical information
Bonnet 19 6
Petrol engines 1 97
Diesel engines
1

98
Fuel tank

1
99
Misfuel prevention (Diesel)
20

1
Running out of fuel (Diesel)

2
03
AdBlue
® additive and SCR system
(Blue HDi Diesel) 2 04
Checking levels

2
12
Checks
2

15
Checks
general information 2 17
Petrol engines / weights 2 18
Diesel engines / weights

2
19
Dimensions


220
Identification markings
2

21
Technical data
emergency or assistance 223
7-inch Touch screen 2 25
Audio system / Bluetooth

2
97
Audio system

3
23
Audio equipment and telematics
Alphabetical index
Contents

8
Maintenance - Technical data
Identification markings 221
Dimensions 220
Changing bulbs
1

69-175
-

front
-

rear Running out of fuel, Diesel

2

03
Opening the bonnet

1

96
un

der the bonnet, petrol

1

97
un

der the bonnet, Diesel

1

98
Petrol engines

2

17-218
Diesel engines

2

17, 219 12V bat ter y
18

2-18 4
Load reduction, economy mode
1
85
en

gine compartment
f u s e s
17
6 -17 7, 181
Petrol weights
2
17-218
Diesel weights
2
17, 219
AdBlue additive
2

04-211
Checking levels
21

2-214
-

oil
-

b

rake fluid
-


coolant
-

s

creenwash fluid
-

a

dditive (Diesel with particle
emissions filter)
Checking components
2

15-216
-


battery
-
a

ir / passenger compartment filter
-

o

il filter
-

p

article emissions filter (Diesel)
-

b

rake pads / discs
Over view

35
Service overdue
For 7 seconds after the ignition is switched on,
the spanner flashes to indicate that the service
must be carried out as soon as possible.
Example: the service is overdue by 186 miles
(3 0 0 k m).
For 7 seconds after the ignition is switched on,
the screen indicates: For Blue HDi Diesel versions, this
alert is also accompanied by the fixed
illumination of the Service warning
lamp, when the ignition is switched on.
The distance remaining may be
weighted by the time factor, depending
on the driving conditions.
Therefore, the spanner may also come
on if you have exceeded the period
since the last service, indicated in the
warranty and maintenance record.
For Blue HDi Diesel versions, the
spanner can also come on early,
according to the degree of deterioration
of the engine oil. The deterioration
of the engine oil depends on the
conditions in which the vehicle is used.
Following this operation, if you wish to
disconnect the battery, lock the vehicle
and wait at least five minutes for the
zero reset to be registered.
Service indicator zero reset
After each service, the service indicator must
be reset to zero.
If you have carried out the service on your
vehicle yourself:
F
s
witch off the ignition,
F

p
ress and hold the trip distance recorder
zero reset button,
F

s
witch on the ignition; the distance recorder
display begins a countdown,
F

w
hen the display indicates "=0" , release
the button; the spanner disappears.
7 seconds after the ignition is switched on,
the distance recorder resumes its normal
operation. The spanner remains on
.
1
Monitoring

143
general points relating to child seats
For maximum safety, please observe the
following recommendations:
-
i
n accordance with e
u
ropean regulations,
all children under the age of 12 or less
than one and a half metres tall must
travel in approved child seats suited to
their weight , on seats fitted with a seat
belt or ISOFIX mountings*,
-

s
tatistically, the safest seats in your
vehicle for carr ying children are the
rear seats,
-

a c
hild weighing less than 9 kg must
travel in the "rear ward facing" position
both in the front and in the rear. PEUGEOT recommends
that children
should travel in the outer rear seats of
your vehicle:
-

"
rearward facing" up to the age of 3,
-

"
forward facing" over the age of 3.
Although one of P
e

uge
O
T main criteria when designing your vehicle, the safety of your children
also depends on you.
*
T
he regulations on carrying children are
specific to each country. Refer to the
legislation in force in your country.
Child seat at the
rear
"Rearward facing"
"Forward facing"
When a "rear ward facing" child seat is installed
on a rear passenger seat , move the vehicle's
front seat for wards and straighten the backrest
so that the "rear ward facing" child seat does
not touch the vehicle's front seat.
When a "for ward facing" child seat is installed
on a rear passenger seat , move the vehicle's
front seat for wards and straighten the backrest
so that the legs of the child in the "for ward
facing" child seat do not touch the vehicle's
front seat.
en

sure that the seat belt is correctly
tensioned.
For child seats with a support leg,
ensure that this is in firm contact with
the floor. If necessary, adjust the front
seat of the vehicle.
6
Safety

149
Locations for child seats secured with the seat belt
Weight of the child / indicative age
Seat Less than 13 kg
(groups 0 (b) and 0+)
up t

o 1 year approx From 9 to 18 kg
(g r o u p 1)
From 1 to 3 years approx
From 15 to 25 kg (group 2)
From 3 to 6 years approx
From 22 to 36 kg (group 3)
From 6 to 10 years approx
Front passenger seat (c)
-

w
ith height adjustment U(R) U(R) U(R)U(R)
-
w

ithout height adjustment U* U* U* U*
Outer rear seats (d) UUUU
Centre rear seat (d) UUUU
U :

s
eat suitable for the installation of a child seat secured using the seat belt and universally
approved "rearward facing" and/or "forward facing".
U(R) : as for U , the vehicle seat must be adjusted to the highest and fully back position.
U* : as for U , straightening the backrest.
(a) universal child seat: child seat which can be installed in all vehicles using the seat belt.
(b)

g
roup 0: from birth to 10 kg. Infant car seats and "car cots" cannot be installed on the front
passenger seat.
(c) consult the legislation in force in your country before installing your child on this seat.
(d)

t
o install a child seat on a rear seat, rear ward or for ward facing, move the front seat for ward,
then straighten the backrest to allow enough room for the child seat and the child's legs.
In accordance with the
e
u
ropean regulation, this table indicates the options for the installation of child seats secured using the seat belt and universally
approved (a) in relation to the weight of the child and the seat in the vehicle.
Remove and stow the head restraint
before fitting a child seat with a
backrest to a passenger seat.
Refit the head restraint when the child
seat is removed.
6
Safety

154
Locations for ISOFIX child seats
In accordance with european Regulations, this table indicates the options for installing ISOFIX child seats on seats in the vehicle fitted with ISOFIX
mountings.
In the case of universal and semi-universal ISOFIX child seats, the ISOFIX size category, determined by a letter from A to G , is indicated on the child
seat next to the ISOFIX logo.
Weight of the child / indicative age
Less than 10 kg (group 0)
u

p to approx. 6
monthsLess than 10 kg
(group 0)
Less than 13 kg (group 0+)
up t

o approx. 1 yearFrom 9 to 18 kg (group 1)
From approx. 1 to 3 years
Type of ISOFIX child seat Infant car seat"rearward facing"
"rearward facing""forward facing"
ISOFIX size categor y F G C D E C D A B B1
Front passenger seat Not ISOFIX
Outer rear seats XIL- SU* IL- SU IL- SU *IL- SU IUF

IL- SU
Centre rear seat Not ISOFIX
I UF:

s

eat suitable for the installation of an I sofix Universal seat, " For ward facing" secured using the
upper strap.
IL- SU: seat suitable for the installation of an I sofix Semi-Universal seat either:
-

"

rear facing" fitted with an upper strap or a support leg,
-

"

for ward facing" fitted with a support leg,
-

a

n infant car seat fitted with an upper strap or a support leg.
For advice on securing of the upper strap, refer to the paragraph "ISOFIX mountings".
X: seat not suitable for the installation of a child seat for the weight group indicated.
* Vehicle seat in a particular position: move the passenger seat for ward. Remove and stow the head restraint
before installing a child seat on a
passenger seat.
Refit the head restraint once the child
seat has been removed.
Safety

187
Towing the vehicle
Access to the tools
The towing eye is installed in the boot under
t h e f l o o r.
To gain access to it:
F
o
pen the boot,
F

l
ift the floor and remove it,
F

r
emove the towing eye from the holder.
General recommendations
Observe the legislation in force in your country.ensure that the weight of the towing vehicle is higher than that of the towed vehicle.
The driver must remain at the wheel of the towed vehicle and must have a valid driving licence.
When towing a vehicle with all four wheels on the ground, always use an approved towing
arm; rope and straps are prohibited.
The towing vehicle must move off gently.
When towing a vehicle with the engine off, there is no longer any power assistance for
braking or steering.
In the following cases, you must always call on a professional recovery service:
-

v
ehicle broken down on a motor way or fast road,
-
f

our-wheel drive vehicle,
-

w
hen it is not possible to put the gearbox into neutral, unlock the steering, or release
the parking brake,
-

t
owing with only two wheels on the ground,
-

w
here there is no approved towing arm available...
Procedure for having your vehicle towed or for towing another vehicle using a removable towing eye.
7
Practical information

190
Driving advice
Distribution of loads
F Distribute the load in the trailer so that the heaviest items are as close as possible to
the axle and the nose weight approaches the
maximum permitted without exceeding it.
Air density decreases with altitude, thus
reducing engine performance. Above
1
000 metres, the maximum towed load must
be reduced by 10
% for every 1 000 metres of
altitude.
Side wind
F Take into account the increased sensitivity to side wind.
Cooling
Towing a trailer on a slope increases the
temperature of the coolant.
As the fan is electrically controlled, its cooling
capacity is not dependent on the engine speed.
F

T
o lower the engine speed, reduce your
speed.
The maximum towed load on a long incline
depends on the gradient and the ambient
temperature.
In all cases, keep a check on the coolant
temperature.
F

I
f the warning lamp and the
STOP warning lamp come on,
stop the vehicle and switch off
the engine as soon as possible.
Braking
Towing a trailer increases the braking distance.
To avoid overheating of the brakes on a long
mountain type of descent, the use of engine
braking is recommended.
Ty r e s
F Check the tyre pressures of the towing vehicle and of the trailer, observing the
recommended pressures.
Lighting
F Check the electrical lighting and signalling on the trailer.
The rear parking sensors will be
deactivated automatically if a genuine
P
e

uge
O
T towbar is used.
Refer to the "Technical data" section for details
of the weights and towed loads which apply to
your vehicle.
Practical information

217
general information
Engine characteristics Weights and towed loads
The kerb weight is equal to the unladen
weight + driver (75 kg).
The gross train weight and towed load values
indicated apply up to a maximum altitude of
1 000 metres; the towed load mentioned must
be reduced by 10 % for every additional
1 000 metres.
The weight of the braked trailer can be
increased, within the
g
T
W limit, on condition
that the
g
V
W of the towing vehicle is reduced
by the same amount.
The recommended nose weight is the vertical
load on the towbar ball (removable with or
without tools). High ambient temperatures may result
in a reduction in the per formance of the
vehicle to protect the engine; when the
ambient temperature is higher than
37 °C, limit the towed weight.
Towing with a lightly loaded vehicle can
adversely affect roadholding.
Braking distances are increased when
towing a trailer.
The speed of a towing vehicle must not
exceed 60 mph (100 km/h) (comply with
the legislation in force in your country).
GV W:
gross vehicle weight, the maximum authorised vehicle weight.GT W: gross train weight, the maximum authorised weight of vehicle
plus trailer.
The engine characteristics (capacity, maximum
power, maximum power speed, fuel, CO
2
emissions...) for your vehicle are given in the
registration document, as well as in sales
brochures.
These characteristics correspond to the
values type-approved on a test bed, under
conditions defined in
e
u

ropean legislation
(Directive 1999/99/
eC

).
For more information, contact a P
e

uge
O
T
dealer or a qualified workshop. The maximum weights and towed loads for your
vehicle are given are given in the registration
document, as well as in sales brochures.
These values are also present on the
manufacturer's plate or label (see the
"Identification markings" section).
For more information, contact a P
e

uge
O
T
dealer or a qualified workshop.
9
Technical data

218
EngineGearbox SpeedsEngine oil
capacity* (litres) Unbraked
trailer (kg) Recommended
nose weight (kg)
1.0 VTi 68 hp Manual53 .13 450 30
1.2 VTi 82 hp Manual
53 .13 520 46
ele

ctronic53 .13 520 46
1.2 e-VTi 82 hp
ele

ctronic53 .13 500 46
1.2 e-THP 110 hp Manual5---
1.4 VTi 95 hp Manual54.25 570 46
1.6 VTi 120 hp Manual
54.25 580 46
Automatic 44.25 580 46
1.6 THP 155 hp Manual64.25 580 46
1.6 THP 200 hp Manual64.25 580 46
* Capacity with oil filter replacement.
Petrol engines / weights
Technical data