mobile Peugeot 3008 Dag 2010 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2010, Model line: 3008 Dag, Model: Peugeot 3008 Dag 2010Pages: 315, PDF Size: 23.06 MB
Page 17 of 315
20
DRIVING SAFELY
Electric parking brake
Manual application/release
The parking brake can be applied man-
ually by pulling the control A .
When the ignition is on, the parking
brake can be released manually by
pressing the brake pedal and pulling
then releasing the control A . Automatic application/release
Press the accelerator and release the
clutch, the parking brake is released
automatically and progressively on ac-
celeration.
When the
engine is switched off , the
parking brake is applied automatically.
Before getting out of the
vehicle, check that the
braking warning lamp
( red ! ) and the warning
lamp P on the control A , are on (not
fl a s h i n g ) .
If you get out of your vehicle
with the engine running, apply
the parking brake manually. Before getting out of the
vehicle, check that the
braking warning lamp
(
red ! ) and the warning
lamp P on the control A are on (not
fl a s h i n g ) .
Do not leave a child alone in
the vehicle with the ignition on;
they could release the parking
brake.
131 Your vehicle is equipped with a system
which keeps it immobile for a short time
(approximately 2 seconds) to assist you
when starting on a hill, the time required
for you to move your foot from the brake
pedal to the accelerator pedal.
This function is only active:
- when the vehicle has been immobil-
ised completely with your foot on the
brake pedal,
- on certain gradients,
- when the driver's door is closed.
Do not get out of the vehicle
during the hill start assist tem-
porary hold phase. 136
If this warning lamp is lit on the
instrument panel, the automatic
application/release are deacti-
vated .
Page 255 of 315
230
0 8
1
3
5
4
2
1
* The services available via the telephone depend on the network, the SIM card and the compatibili ty of the Bluetooth equipment used. Refer to your telephone's manual and your operator to check which services you have access to. A list of mobile telephones which offer the best range of services is available from dealers.
USING THE TELEPHONE
CONNECTING A BLUETOOTH
TELEPHONE
For safety reasons and because they require prolo ngedonged attention on the part of the driver, the operations for pairing the Blue Bluetooth mobile telephone to the hands-free system of the PEUGEOT COT Connect Media must be carried out with the vehicle stationary and the id the ignition on.
Activate the telephone's Bluetooth function. The last telephone connected is reconnected automatically.
If no telephone is connected, the system prompts you to "Connect phone". Select "Yes" and press OK to c o n fi r m .
Enter the authentication code on the telephone. The code to be entered is displayed on the screen.
To change the telephone connected, press the TEL button, then select Phone menu, then "Select phone" then "Connect Bluetooth phone" then select the telephone required or "Search phone". P r e s s O K a t e a c h s t e p t o c o n fi r m .
Once the telephone has been connected, the PEUGEOGEOT Connect Media can synchronise the address book and the call lis call list. This synchronisation may take a few minutes * .
T h e l i s t o f t e l e p h o n e s c o n n e c t e d p r e v i o u s l y ( 4 m a x i m u m ) a p p e a r s o n T h e l i s t o f t e l e p h o n e s c o n n e c t e d p r e v i o u s l y ( 4 m a x i m u m ) a p p e a r s o n the multifunction screen. Select the telephone requ ired uired then select "Connect phone" for a new connection. Select "Delet e pelete pairing" to cancel the connection to the telephone.
Press the TEL button.
F o r a fi r s t c o n n e c t i o n , s e l e c t "Search phone" and press OK to c o n fi r m . T h e n s e l e c t t h e n a m e o f t h e telephone.
SEARCH PHONE
Page 266 of 315
241
SOLUTION
There is a long waiting period following the insertion of a CD.
When a new medium is inserted, the system reads a certain amount of d a t a ( d i r e c t o r y , t i t l e , a r t i s t , e t c . ) . T h i s m a y t a k e a f e w s e c o n d s . This phenomenon is normal.
I cannot connect my Bluetooth telephone. The telephone's Bluetooth function may be switched off or the equipment may not be visible. - Check that your telephone's Bluetooth function is switched on. - Check that your telephone is visible.
QUESTION ANSWER
The Bluetooth telephone is not compatible with the system. A list of compatible Bluetooth mobile telephones is available from the dealer network.
The system does not play the DVD. The region protection may not be compatible. Insert DVDs which have compatible region protection.
I cannot copy the CD to t h e J u k e b o x . The wrong source is selected. Change the active source to CD.
The CD is copy-protected. It is normal that a protected CD cannot be copied.
The route calculation is not successful. T h e e x c l u s i o n c r i t e r i a m a y c o n fl i c t w i t h t h e c u r r e n t l o c a t i o n ( e x c l u s i o n o f t o l l r o a d s o n a t o l l m o t o r w a y ) . Check the exclusion criteria on the Navigation M e n u ( " R o u t e o p t i o n s " - " A v o i d a n c e c r i t e r i a " ) .
The volume of the telephone connected in Bluetooth mode is inaudible.
The volume depends both on the system and on the t elephone. Increase the volume of the PEUGEOT Connect Media, to maximum if required, and increase the volume of the telephone if necessary.